Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 4 de 4
Filter
Add more filters










Database
Language
Publication year range
1.
Adv Mater ; 36(24): e2313830, 2024 Jun.
Article in English | MEDLINE | ID: mdl-38588005

ABSTRACT

This study pioneers a chemical sensor based on surfactant-free aerosol-synthesized single-walled carbon nanotube (SWCNT) films for detecting nitrogen dioxide (NO2). Unlike conventional CNTs, the SWCNTs used in this study exhibit one of the highest surface-to-volume ratios. They show minimal bundling without the need for surfactants and have the lowest number of defects among reported CNTs. Furthermore, the dry-transferrable and facile one-step lamination results in promising industrial viability. When applied to devices, the sensor shows excellent sensitivity (41.6% at 500 ppb), rapid response/recovery time (14.2/120.8 s), a remarkably low limit of detection (below ≈0.161 ppb), minimal noise, repeatability for more than 50 cycles without fluctuation, and long-term stability for longer than 6 months. This is the best performance reported for a pure CNT-based sensor. In addition, the aerosol SWCNTs demonstrate consistent gas-sensing performance even after 5000 bending cycles, indicating their suitability for wearable applications. Based on experimental and theoretical analyses, the proposed aerosol CNTs are expected to overcome the limitations associated with conventional CNT-based sensors, thereby offering a promising avenue for various sensor applications.

2.
ACS Appl Mater Interfaces ; 14(16): 18866-18876, 2022 Apr 27.
Article in English | MEDLINE | ID: mdl-35418224

ABSTRACT

Stretchable and flexible electronics has attracted broad attention over the last years. Nanocomposites based on elastomers and carbon nanotubes are a promising material for soft electronic applications. Despite the fact that single-walled carbon nanotube (SWCNT) based nanocomposites often demonstrate superior properties, the vast majority of the studies were devoted to those based on multiwalled carbon nanotubes (MWCNTs) mainly because of their higher availability and easier processing procedures. Moreover, high weight concentrations of MWCNTs are often required for high performance of the nanocomposites in electronic applications. Inspired by the recent drop in the SWCNT price, we have focused on fabrication of elastic nanocomposites with very low concentrations of SWCNTs to reduce the cost of nanocomposites further. In this work, we use a fast method of coagulation (antisolvent) precipitation to fabricate elastic composites based on thermoplastic polyurethane (TPU) and SWCNTs with a homogeneous distribution of SWCNTs in bulk TPU. Applicability of the approach is confirmed by extra low percolation threshold of 0.006 wt % and, as a consequence, by the state-of-the-art performance of fabricated elastic nanocomposites at very low SWCNT concentrations for strain sensing (gauge factor of 82 at 0.05 wt %) and EMI shielding (efficiency of 30 dB mm-1 at 0.01 wt %).

3.
Carbohydr Polym ; 258: 117614, 2021 Apr 15.
Article in English | MEDLINE | ID: mdl-33593532

ABSTRACT

The functionalization of the bacterial cellulose (BC) surface with a chitosan biopolymer to expand the areas of possible applications of the modified BC is an important scientific task. The creation of such composites in the carbonic acid solutions that were performed in this work has several advantages in terms of being biocompatible and eco-friendly. Quantitative analysis of chitosan content in the composite was conducted by tritium-labeled chitosan radioactivity detection method and this showed three times increased chitosan loading. Different physicochemical methods showed successful incorporation of chitosan into the BC matrix and interaction with it through hydrogen bonds. Microscopy results showed that the chitosan coating with a thickness of around 10 nm was formed in the bulk of BC, covering each microfibril. It was found that the inner specific surface area increased 1.5 times on deposition of chitosan from the solutions in carbonic acid.


Subject(s)
Bacteria/metabolism , Carbon Dioxide/chemistry , Carbonic Acid/chemistry , Cellulose/chemistry , Chitosan/chemistry , Biocompatible Materials/chemistry , Biopolymers/chemistry , Green Chemistry Technology , Microscopy, Electron, Scanning , Nanoparticles/chemistry , Pressure , Spectroscopy, Fourier Transform Infrared , Thermogravimetry , Tissue Engineering/methods , Tritium/chemistry , X-Ray Diffraction
4.
Carbohydr Polym ; 190: 103-112, 2018 Jun 15.
Article in English | MEDLINE | ID: mdl-29628226

ABSTRACT

Chitosan-based hydrogels with stabilized Ag nanoparticles were synthesized in the aqueous solutions of carbonic acid, i.e. water saturated with CO2 under pressure in hundreds of bars. Such a medium is biocompatible and self-neutralizing at decompression. The influence of various parameters, such as chitosan molecular weight, molar ratio of chitosan to silver, additional stabilization of gels by genipin as a cross-linking agent, on the structure of the chitosan/Ag composites was investigated using transmission electron microscopy, scanning electron microscopy, X-ray diffraction analysis, rheology measurements. The distributions of chitosan-stabilized Ag nanoparticles in a chitosan matrix turned out to be uniform, their average size was in the range of 2-5 nm. The higher degree of Ag nanoparticles reduction could be achieved using self-eliminating gaseous hydrogen as an additional reducing agent being admixed to CO2. This was consistently confirmed by different research methods (TEM, XRDA, UV-vis spectroscopy).

SELECTION OF CITATIONS
SEARCH DETAIL
...