ABSTRACT
We report on the development of a side-fused signal-pump combiner with an integrated feed-through 34/250-µm chirally coupled core fiber. The manufacturing process involves a novel rotationally symmetrical cladding restructuring using a CO2-laser beam. The signal-pump combiner exhibits the pump-to-signal fiber coupling efficiency of 90%, signal-to-pump isolation of 30â dB, and is high-power tested at a pump input power of >500â W. Additionally, a signal feed-through loss of 0.23â dB is measured and the S2-method is used to confirm non-degradation of the spatial modes. The side-fused combiner technique has the advantage of an uninterrupted signal core and can be used in co- and counter-pumped configurations.
ABSTRACT
Large mode area fibers have become indispensable in addressing the power requirements of laser sources in gravitational wave detectors. Besides high power capabilities, the system must provide an excellent beam quality and polarization. In this Letter, we present the characterization of a monolithic high-power fiber amplifier at 1064 nm, built using an ytterbium-doped chirally coupled-core fiber, which achieves an output power of 100 W in a linearly polarized $ {{\rm TEM}_{00}} $TEM00 mode in an all-fiber setup.
ABSTRACT
We present phase-sensitive absolute amplitude measurements of surface acoustic wave fields obtained using a stroboscopic white-light interferometer. The data analysis makes use of the high resolution available in the measured interferometric phase data, enabling the characterization of the out-of-plane surface vibration fields in electrically excited microstructures with better than 100 pm amplitude resolution. The setup uses a supercontinuum light source with tailored spectral properties for obtaining the high amplitude resolution. The duration of the light pulses is less than 300 ps to allow the detection of high frequencies. These capabilities enabled a detailed measurement of the focusing of surface acoustic waves by an annular interdigital transducer structure operating at 74 MHz, featuring a maximum vibration amplitude of 3 nm.
ABSTRACT
We present a picosecond supercontinuum light source designed for stroboscopic white-light interferometry. This source offers a potential for high-resolution characterization of vibrational fields in electromechanical components with frequencies up to the GHz range. The light source concept combines a gain-switched laser diode, the output of which is amplified in a two-stage fiber amplifier, with supercontinuum generation in a microstructured optical fiber. Implemented in our white-light interferometer setup, optical pulses with optimized spectral properties and below 310 ps duration are used for stroboscopic illumination at freely adjustable repetition rates. The performance of the source is demonstrated by characterizing the surface vibration field of a square-plate silicon MEMS resonator at 3.37 MHz. A minimum detectable vibration amplitude of less than 100 pm is reached.
ABSTRACT
We describe a LED-based stroboscopic white-light interferometer and a data analysis method that allow mapping out-of-plane surface vibration fields in electrically excited microstructures with sub-nm amplitude resolution for vibration frequencies ranging up to tens of MHz. The data analysis, which is performed entirely in the frequency domain, makes use of the high resolution available in the measured interferometric phase data. For demonstration, we image the surface vibration fields in a square-plate silicon MEMS resonator for three vibration modes ranging in frequency between 3 and 14 MHz. The minimum detectable vibration amplitude in this case was less than 100 pm.
Subject(s)
Interferometry/instrumentation , Lighting/instrumentation , Materials Testing/instrumentation , Micro-Electrical-Mechanical Systems/instrumentation , Oscillometry/instrumentation , Semiconductors , Stroboscopy/instrumentation , Equipment Design , Equipment Failure Analysis , Photoacoustic Techniques/instrumentation , VibrationABSTRACT
We present an approach for numerically solving the multimode generalized nonlinear Schrödinger equation (MM-GNLSE). We propose to transform the MM-GNLSE to a system of first-order ordinary differential equations (ODEs) that can then be solved using readily available ODE solvers, thus making modeling of pulse propagation in multimode fibers easier. The solver is verified for the simplest multimode case in which only the two orthogonal polarization states in a non-birefringent microstructured optical fiber are involved. Also, the nonlinear dynamics of the degree and state of spectral polarization are presented for this case.
Subject(s)
Algorithms , Models, Theoretical , Nonlinear Dynamics , Numerical Analysis, Computer-Assisted , Optical Fibers , Refractometry/instrumentation , Computer Simulation , Equipment Design , Equipment Failure Analysis , Light , Scattering, RadiationABSTRACT
We have studied the excitation of higher-order modes and their role in supercontinuum generation in a three-hole silica suspended-core fiber, both experimentally and numerically. We find that pump coupling optimized to highest transmission can yield substantial excitation of higher order modes. With up to about 40% of the pump power coupled to higher order modes, we have studied supercontinuum generation in this fiber. In agreement with experiments, simulation results based on the multimode generalized nonlinear Schrödinger equation confirm that the spectral width is determined by spectral broadening in the fundamental mode, whereas the numerical analysis reveals that intermodal nonlinear interactions are strongly suppressed.
ABSTRACT
We present and numerically characterize a surface-plasmon-resonance sensor based on an H-shaped optical fiber. In our design, the two U-shaped grooves of the H-fiber are first coated with a thin gold layer and then covered by a uniform titanium dioxide layer to facilitate spectral tuning of the device. A finite element method analysis of the sensor indicates that a refractive-index resolution of up to 5 · 10(3) nm/RIU can be obtained.
ABSTRACT
We report on our recent studies of dissociative recombination (DR) employing two different fragment imaging detection techniques at the TSR storage ring in Heidelberg, Germany. Principles of an upgraded 3D optical system and the new energy-sensitive multistrip detector (EMU) are explained together with possible applications in reaction dynamics studies. With the EMU imaging detector we succeeded to observe the branching ratios after DR of deuterated hydronium ions D(3)O(+) at energies of 0-0.5 and 4-21 eV. The branching ratios are almost constant at low energies while above 6 eV both oxygen-producing channels O + D + D + D and O + D(2) + D strongly increase and dominate by about 85% at 11 eV. To demonstrate further capabilities of our fragment imaging detectors, we also summarize some of our additional recent studies on DR of molecular ions important for astrophysics as well as for fundamental unimolecular dynamics.