Albumin adsorption on unmodified and sulfonated polystyrene surfaces, in relation to cell-substratum adhesion.

Albumin is commonly applied for blocking the adsorption of other proteins and to prevent the nonspecific adhesion of cells to diverse artificial substrata. Here we address the question of how effective these albumin properties are--by investigating unmodified and sulfonated polystyrene substrata with distinctly different wettabilities. As clearly shown with (125)I-radioisotopic assays, above a concentration of 10-20 µg/mL, the efficiency of bovine serum albumin (BSA) adsorption became markedly higher on the sulfonated surface than on the unmodified one. This study was assisted with the atomic force microscopy. On the unmodified surface, BSA, adsorbed from sufficiently concentrated solutions, formed a monolayer, with occasional intrusions of multilayered patches. Conversely, the arrangement of BSA on the sulfonated surface was chaotic; the height of individual molecules was lower than on the unmodified polystyrene. Importantly, the adhesion study of LNCaP and DU145 cells indicated that both surfaces, subjected to the prior BSA adsorption, did not completely loose their cell-adhesive properties. However, the level of adhesion and the pattern of F-actin organization in adhering cells have shown that cells interacted with unmodified and sulfonated surfaces differently, depending on the arrangement of adsorbed albumin. These results suggest the presence of some bare substratum area accessible for cells after the albumin adsorption to both types of investigated surfaces.

Atomic force microscopy evidence for conformational changes of fibronectin adsorbed on unmodified and sulfonated polystyrene surfaces.

The effect of polystyrene surface polarity on the conformation of adsorbed fibronectin (FN) has been studied with atomic force microscopy. We demonstrated that bare sulfonated and nonsulfonated polystyrene surfaces featured similar topographies. After the FN adsorption, direct comparison of both types of substrata revealed drastically different topographies, roughness values, and also cell-adhesive properties. This was interpreted in terms of FN conformational changes induced by the surface polarity. At high-solute FN concentrations the multilayer FN adsorption took place resulting, for the sulfonated substratum, in an increase of surface roughness, whereas for the nonsulfonated one the roughness was approximately stable. Conversely, the FN conformation characteristic for the first saturative layer tended to be conserved in the consecutive layers, as evidenced by height histograms. The height of individual FN molecules indicated, consonantly with the derived thickness of the adsorbed protein layer (the latter value being 1.4 nm and 0.6 nm, respectively, for an unmodified and sulfonated polystyrene surface), that molecules are flattened on polar surfaces and more compact on nonsulfonated ones. It was also demonstrated that the FN adsorption and conformation on polymeric substrata, and hence the resultant cell-adhesive properties, depended on the chemistry of the original surface rather than on its topography. Our results also demonstrated the ability of surface polarity to influence the protein conformation and its associated biological activity.

Semiquantitative evaluation of fibronectin adsorption on unmodified and sulfonated polystyrene, as related to cell adhesion.

The process of human fibronectin (FN) adsorption on nonsulfonated and sulfonated polystyrene surfaces was studied in relation to mechanisms of L1210 cell adhesion. Radioisotope assays directed towards FN, as well as ELISA measurements of adsorbed FN and bovine serum albumin (BSA) were carried out. (125)I radioisotope assays led to linear FN adsorption isotherms. When combined to ELISA measurements for FN, they revealed the multilayer adsorption. Results indicated a large difference in the saturating first-layer surface density of FN adsorbed on sulfonated and nonsulfonated polystyrene surfaces: significantly (ca. factor of 5) less FN molecules are necessary to complete a monolayer on sulfonated than on nonsulfonated polystyrene. This suggests an unfolded conformation of FN on sulfonated polystyrene, and a more compact one on the nonsulfonated polymer. Significant conformational changes of FN are also indicated by the following: (1) early phase of cell adhesion to FN adsorbed on sulfonated polystyrene surfaces is significantly (ca. factor of 6) higher than to FN on nonsulfonated surfaces, and in the former case adhesion proceeds mostly via alpha(5)beta(1) integrins; (2) RGD, the crucial fragment within central cell binding domain, seems to be partially hidden in the protein structure adopted on nonsulfonated surfaces; (3) patterns of F-actin organization differ in cells adhering to FN on sulfonated and nonsulfonated surfaces. The ELISA study directed against BSA (this protein always present on the surface after the adsorption of FN), showed the importance of "free area," uncovered by both proteins, which influence the cell adhesion processes.

The shape of cells adhering to sulfonated copolymer surfaces.

We studied the shape of L1210 leukaemia cells adhering in a protein-free medium to sulfonated (styrene/methyl methacrylate) copolymer surfaces of two sulfonic group densities, and thus of differing wettability. The use of our image analysis method and the mathematical procedure [Kowalczynska, H.M. et al, Colloids Surfaces B: Biointerfaces, 30 (2003) 193-206.] allowed us to calculate the values of the so-called shape parameter, which quantitatively determines the three-dimensional cell shape. Here, we show that the values of the shape parameter of the adhering cells and the F-actin concentration, in the region near the cell-substratum interface, depend on the density of sulfonic groups present on the substratum surface.

Fibronectin adsorption and arrangement on copolymer surfaces and their significance in cell adhesion.

The adsorption of fibronectin (FN) to (styrene/methyl methacrylate) copolymer surfaces, both sulfonated (hydrophilic) and nonsulfonated (hydrophobic), was studied by means of the radioisotope (125I-FN) and ELISA assays; the latter employed monoclonal antibodies. It was found that the radioiodination-derived isotherms did not follow the Langmuir-type adsorption law within the FN concentration range studied; rather, a quasi-linear FN surface density versus bulk concentration dependence was observed. These isotherms, and our recent ELISA measurements with polyclonal antibodies, allowed us to estimate saturative FN surface densities, which were, within the experimental error, similar on both types of surfaces. This suggested the amount of adsorbed FN to be not responsible for observed differences in leukaemia L1210 cell adhesion (FN-coated sulfonated surfaces are far more pro-adhesive than their nonsulfonated analogues). The presumption that these differences are induced by changes in the FN arrangement was confirmed by the use of monoclonal antibodies directed against distinct FN domains, and by the blocking of alpha5beta1 integrin receptor with the synthetic Gly-Arg-Gly-Asp-Ser-Pro (GRGDSP) peptide. The RGD sequence located within the FN cell-binding domain seems to be masked in the structure adopted on nonsulfonated surfaces, which hinders the integrin-ligand interaction.

Modulation of adhesion, spreading and cytoskeleton organization of 3T3 fibroblasts by sulfonic groups present on polymer surfaces.

The early phase of 3T3 fibroblast interaction with sulfonated styrene copolymer surfaces, of two sulfonic group densities and thus of differing wettability, was studied. The sulfonic groups present on copolymer surfaces affected the behaviour of cells, i.e. they stimulated cell adhesion, activated cell spreading and influenced cytoskeleton reorganization. The relative number of adhering cells correlated, while the number of spreading cells inversely correlated, with the surface density of sulfonic groups. Cell shape and the pattern of distribution of F-actin, alpha-actinin and vinculin in the interacting cells also depend on the surface density of sulfonic groups. On surfaces of high sulfonic group density, highly polarized cells were observed with F-actin bundles. On surfaces of low sulfonic group density, the cells spread with a square-like morphology with F-actin organized in stress fibres. In contrast, the cells spread poorly on nonsulfonated surfaces and cell adhesion was unaffected by surface wettability. The contribution of alpha(5)beta(1), alpha(4), and beta(5)integrins to the cell interaction with fibronectin (FN) and vitronectin (VN) adsorbed from serum-containing medium on polymer surfaces was examined. Our results suggest that surface sulfonic groups influence the conformation of FN and VN adsorbed on polymer surfaces and, in turn, determine the integrins that are involved in cell adhesion.

Adsorption characteristics of human plasma fibronectin in relationship to cell adhesion.

Adsorption of human plasma fibronectin (FN) on nonsulfonated and sulfonated polymer surfaces was studied, by using a polyclonal antiserum to FN and the ELISA method. ELISA signal was recorded as a function of FN concentration in solutions. The concentration dependence of FN binding shows the saturation effect in the range 5-10 microg/mL. ELISA data are discussed in the terms of a self-assembled monolayer and different conformations of the FN molecule. The early adhesion of L1210 cells to polymer surfaces after prior adsorption of FN on these surfaces was studied under static conditions. In the case of FN adsorbed on sulfonated surfaces, the relative number of adhering cells increased with the increase of the interfacial surface tension (i.e., the cell adhesion depends on the surface density of sulfonic groups). However, in the case of FN adsorbed on nonsulfonated surfaces, the relative number of adhering cells was low and independent on the interfacial surface tension. The alpha(5)beta(1)-integrin blocking by a monoclonal antibody resulted in a strong inhibition of the cell adhesion to FN adsorbed on sulfonated polymer surfaces. This indicates that cell adhesion to FN adsorbed on these surfaces is mostly mediated by the alpha(5)beta(1)-integrin. In contrast, in the case of FN adsorbed on nonsulfonated surfaces the cell adhesion was not inhibited by the alpha(5)beta(1)-integrin blocking.