Does dental material type influence bacterial adhesion under the same polishing conditions? Direct observation using a fluorescent staining technique: An in vitro study.

Highly polished 3, 4, and 5 mol% yttria-stabilized zirconia and CAD/CAM composite resin samples were prepared, and the influence of surface roughness (Ra and Sa, 21 areas/group), wettability (contact angle and surface energy, 3 samples/group), and surface chemical composition (2 samples/group) on single-strain bacterial adhesion models (Porphyromonas gingivalis, Streptococcus oralis, Streptococcus sanguinis, Streptococcus gordonii, and Streptococcus mutans) were compared via fluorescent staining with graphical analysis (21 areas/group). Statistical analysis was performed using the Shapiro-Wilk test followed by one-way analysis of variance with Tukey's test or the Kruskal-Wallis test with Dunn's test (α=0.05) and linear regression. For dental zirconia with the same surface roughness, the yttria content did not significantly influence the initial bacterial adhesion. However, higher bacterial adhesion was detected for the composite resin owing to its high C, O, and Si contents. There was no correlation between surface energy and bacterial adhesion for any bacterial strain (p<0.005).

Enhanced Photocatalysis of Electrically Polarized Titania Nanosheets.

Titania (TiO2) nanosheets are crystals with controlled, highly ordered structures that improve the functionality of conventional TiO2 nanoparticles. Various surface modification methods have been studied to enhance the effectiveness of these materials as photocatalysts. Surface modifications using electrical polarization have attracted considerable attention in recent years because they can improve the function of titania without changing its composition. However, the combination of facet engineering and electrical polarization has not been shown to improve the functionality of TiO2 nanosheets. In the present study, the dye-degradation performance of polarized TiO2 nanosheets was evaluated. TiO2 nanosheets with a F/Ti ratio of 0.3 were synthesized via a hydrothermal method. The crystal morphology and structure were evaluated using transmission electron microscopy and X-ray diffraction. Then, electrical polarization was performed under a DC electric field of 300 V at 300 °C. The polarized material was evaluated using thermally stimulated current measurements. A dye-degradation assay was performed using a methylene blue solution under ultraviolet irradiation. The polarized TiO2 nanosheets exhibited a dense surface charge and accelerated decolorization. These results indicate that electrical polarization can be used to enhance the photocatalytic activity of TiO2.

Lithium-Modified TiO2 Surface by Anodization for Enhanced Protein Adsorption and Cell Adhesion.

Promoting osseointegration is an essential step in improving implant success rates. Lithium has gradually gained popularity for promoting alkaline phosphatase activity and osteogenic gene expression in osteoblasts. The incorporation of lithium into a titanium surface has been reported to change its surface charge, thereby enhancing its biocompatibility. In this study, we applied anodization as a novel approach to immobilizing Li on a titanium surface and evaluated the changes in its surface characteristics. The objective of this study was to determine the effect of Li treatment of titanium on typical proteins, such as albumin, laminin, and fibronectin, in terms of their adsorption level as well as on the attachment of osteoblast cells. Titanium disks were acid-etched by 66 wt % H2SO4 at 120 °C for 90 s and set as the control group. The etched samples were placed in contact with an anode, while a platinum bar served as the counter electrode. Both electrodes were mounted on a custom electrochemical cell filled with 1 M LiCl. The samples were anodized at constant voltages of 1, 3, and 9 V. Scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM) results showed no significant differences in the topography. However, the ζ potentials of the 3 V group were higher than those of the control group at a physiological pH of 7.4. Interestingly, the adsorption level of the extracellular matrix protein was mostly enhanced on the 3 V-anodized surface. The number of attached cells on the Li-anodized surfaces increased. The localization of vinculin at the tips of the stretching cytoplasmic projections was observed more frequently in the osteoblasts on the 3 V-anodized surface. Although the optimal concentration or voltage for Li application should be investigated further, this study suggests that anodization could be an effective method to immobilize lithium ions on a titanium surface and that modifying the surface charge characteristics enables a direct protein-to-material interaction with enhanced biological adhesion.

Hydraulic calcium silicate-based root canal sealers mitigate proinflammatory cytokine synthesis and promote osteogenesis in vitro.

Background/purpose: The mineralized tissue-inductive ability and anti-inflammatory properties of hydraulic calcium silicate-based (HCSB) sealers have not been fully elucidated. This study aimed to evaluate the effects of the HCSB sealers Bio-C sealer (BioC), Well-Root ST (WST), and EndoSequence BC sealer (BC), on osteoblastic differentiation/mineralization and proinflammatory cytokine synthesis by macrophages. Materials and methods: Diluted extracts of set sealers or calcium chloride solutions of approximately equivalent Ca2+ concentrations were applied to a mouse osteoblastic cell line (Kusa-A1 cells) and lipopolysaccharide-stimulated mouse macrophage cell line (RAW264.7 cells). Expressions of osteoblastic markers in Kusa-A1 cells and proinflammatory cytokines in RAW264.7 cells were evaluated by reverse transcription-quantitative polymerase chain reaction and enzyme-linked immunosorbent assays. Mineralized nodules were detected by Alizarin red S staining. Cell proliferation was assessed by WST-8 assay and cell attachment on set sealers was examined by scanning electron microscopy. Results: The three sealer extracts significantly upregulated osteocalcin and osteopontin mRNA, and promoted significant mineralized nodule formation in Kusa-A1 cells. The three sealer extracts significantly downregulated the mRNA expressions of interleukin (IL)-1α, IL-1ß, IL-6, and tumor necrosis factor (TNF)-α and protein levels of IL-6 and TNF-α in RAW264.7 cells. Calcium chloride solutions induced osteoblastic differentiation/mineralization. AH Plus Jet (a control sealer) extract did not. The three HCSB sealers did not interfere with the growth and attachment of Kusa-A1 cells. Conclusion: BioC, WST, and BC were biocompatible, upregulated osteoblastic differentiation/mineralization, and downregulated proinflammatory cytokine expression. Ca2+ released from HCSB sealers might be involved, at least in part, in the induction of osteoblastic differentiation/mineralization.

Effect of ultraviolet irradiation treatment on shear bond strength between polymethyl methacrylate and cobalt-chromium-molybdenum alloy.

We aimed to elucidate the effects of ultraviolet (UV) irradiation on the shear bond strength (SBS) between heat-cured polymethyl methacrylate (PMMA) and a Co-Cr-Mo alloy. Disk-shaped Co-Cr-Mo alloy prepared by casting were subjected to different UV treatment times (0, 15, and 30 min). To determine the effect of UV treatment on surface properties of the alloy, surface roughness, wettability, and chemical compositions were analyzed. To evaluate the SBS, cylindrical PMMA was bonded to the UV-treated alloy, and subsequently subjected to the SBS test after 24 h of storage at room temperature or following 10,000 thermal cycles (n=10/group). After the UV treatment, the surface roughness remained unchanged, but oxidation resulted in the surface exhibiting greater hydrophilic characteristics. The UV-treated group showed significantly higher SBS values than those of the non-treated group (p<0.001). These results suggested that UV treatment-mediated oxidation improved the bond strength between PMMA and Co-Cr-Mo alloy.

Enhancement of bone regeneration by coadministration of angiogenic and osteogenic factors using messenger RNA.

BACKGROUND: Bone defects remain a challenge today. In addition to osteogenic activation, the crucial role of angiogenesis has also gained attention. In particular, vascular endothelial growth factor (VEGF) is likely to play a significant role in bone regeneration, not only to restore blood supply but also to be directly involved in the osteogenic differentiation of mesenchymal stem cells. In this study, to produce additive angiogenic-osteogenic effects in the process of bone regeneration, VEGF and Runt-related transcription factor 2 (Runx2), an essential transcription factor for osteogenic differentiation, were coadministered with messenger RNAs (mRNAs) to bone defects in the rat mandible. METHODS: The mRNAs encoding VEGF or Runx2 were prepared via in vitro transcription (IVT). Osteogenic differentiation after mRNA transfection was evaluated using primary osteoblast-like cells, followed by an evaluation of the gene expression levels of osteogenic markers. The mRNAs were then administered to a bone defect prepared in the rat mandible using our original cationic polymer-based carrier, the polyplex nanomicelle. The bone regeneration was evaluated by micro-computerized tomography (µCT) imaging, and histologic analyses. RESULTS: Osteogenic markers such as osteocalcin (Ocn) and osteopontin (Opn) were significantly upregulated after mRNA transfection. VEGF mRNA was revealed to have a distinct osteoblastic function similar to that of Runx2 mRNA, and the combined use of the two mRNAs resulted in further upregulation of the markers. After in vivo administration into the bone defect, the two mRNAs induced significant enhancement of bone regeneration with increased bone mineralization. Histological analyses using antibodies against the Cluster of Differentiation 31 protein (CD31), alkaline phosphatase (ALP), or OCN revealed that the mRNAs induced the upregulation of osteogenic markers in the defect, together with increased vessel formation, leading to rapid bone formation. CONCLUSIONS: These results demonstrate the feasibility of using mRNA medicines to introduce various therapeutic factors, including transcription factors, into target sites. This study provides valuable information for the development of mRNA therapeutics for tissue engineering.

Development of TiO2 Nanosheets with High Dye Degradation Performance by Regulating Crystal Growth.

TiO2 nanosheets have been studied as photocatalysts in various fields, and their performance has been actively improved. Herein, we prepared titania nanosheets with a smaller size than those reported previously with a side length of 29 nm and investigated their photocatalytic activity. (NH4)2TiF6 and Ti(OBu)4 were used as raw materials, and the F/Ti ratio was varied in the range of 0.3 to 2.0 to produce a series of samples with different side lengths by hydrothermal synthesis. A reduction in the F/Ti ratio led to the reduced size of the titanium nanosheets. The photocatalytic activity of each sample was evaluated through the degradation of methylene blue (MB) under ultraviolet (UV) irradiation (365 nm, 2.5 mW/cm2). UV irradiation promoted the decomposition of MB, and the highest degradation efficiency was achieved using titania nanosheets prepared with a F/Ti ratio of 0.3. The high catalytic activity can be attributed to the increase in the surface area due to size reduction. The ratio of the {001} surface exposed on the titania nanosheet also affected the photocatalytic activity; it resulted in increased activation of the reaction. This study demonstrates that further activation of the photocatalytic activity can be achieved by adjusting the size of titania nanosheets.

A composite resin core with a new zirconia tube reduces the surface strain at the cervical area of a mandibular molar: A model tooth study.

PURPOSE: This study aimed to evaluate the surface strain at the cervical area of endodontically treated molars with a large pulp chamber restored using a composite resin core with three different types of core build-up systems. METHODS: Reproduction models of human mandibular molars with prepared post spaces were used in this study. Roots duplicated with a composite resin were used as the experimental teeth. Three types of core build-up systems were used: composite resin core(RC), composite resin core with fiber posts (FC), and composite resin core with a prefabricated zirconia tube (ZC). Each group comprised eight specimens. Crowns made of yttria partially stabilized zirconia were cemented with dual-cure resin cement. Four strain gauges were attached to the surfaces of each specimen: the cervical area of the root and crown, on the buccal and lingual sides. The surface strain at each cervical area was measured using a static loading test and statistically analyzed. RESULTS: In the case of static loading to the buccal cusp inner slope, ZC showed a significantly lower strain than RC in the crown on the buccal side and in the root and FC in the root. In the central fossa, ZC showed a significantly lower strain than FC in the root on the lingual side. CONCLUSIONS: The prefabricated zirconia tube reduced the surface strain at the cervical area of the buccal/lingual root in molars; however, the effect was small in the cervical area of the crown.

Emergence angle: Comprehensive analysis and machine learning prediction for clinical application.

PURPOSE: To analyze and compare the emergence angle (EA) using two measurement methods, conventional and modified (EA-GPT and EA-R), the EAs of all-natural teeth were evaluated and classified to derive a suitable and predictable clinically applicable measurement method. METHODS: Natural human teeth (n=600) were classified, cleaned, and thoroughly inspected. Teeth were scanned using an intraoral scanner. The scanned data were analyzed using three-dimensional analysis software for both methods with several points per surface. A Bland-Altman analysis was used for statistical analysis and a heat map and a nonparametric density plot to assess the repetition and distribution. An XGBoost regression model was used for prediction. RESULTS: The EA-R method showed significantly different values compared to the EA-GPT method, representing an increase of 17.5-20.7% for the proximal surfaces. An insignificant difference between the two methods was observed for other surfaces. Different teeth classes showed variation in the normal range, thereby resulting in a new classification of the EA for all-natural teeth based on the interquartile range. The machine learning gradient boosting model predicted conventional data with an average mean absolute error of 0.9. CONCLUSIONS: Variations in the natural teeth EA and measurement methods, suggest a new classification for EA. The established artificial intelligence method demonstrated robust performance, which could aid in implementing EA measurement in prosthetic designs.

Osteoblast Response of Additively Manufactured Zirconia and Alumina-Toughened Zirconia.

Zirconia ceramics have been widely used in dentistry. Herein, we assess the surface morphology, surface texture, and osteoblast response of additively manufactured zirconia and alumina-toughened zirconia (ATZ) in comparison with titanium. The surface roughness, contact angle, and surface microstructure of titanium sandblasted with large-grit alumina and subsequently acid-etched using 18% HCl and 49% H2SO4 (SLA-titanium), uniaxially pressed zirconia (UP zirconia), additively manufactured zirconia (AM zirconia), and additively manufactured ATZ (AM ATZ) were investigated. Moreover, the cell viability, alkaline phosphatase (ALP) activity, and gene expression of type I collagen on these materials were evaluated. The data were statistically analyzed using one-way ANOVA with Tukey's post hoc test. SLA-titanium showed the highest surface roughness and contact angle. The other three materials showed comparable surface roughness and contact angles. Micro- and nanoroughness were observed on the surface of SLA-titanium. UP zirconia and AM zirconia had similar surface morphologies. The cell viability, ALP activity, and gene expression of type I collagen on AM zirconia were comparable to or better than those on SLA-titanium. Our results indicate that AM zirconia is a promising material for zirconia dental implants.

Texture-Based Neural Network Model for Biometric Dental Applications.

BACKGROUND: The aim is to classify dentition using a novel texture-based automated convolutional neural network (CNN) for forensic and prosthetic applications. METHODS: Natural human teeth (n = 600) were classified, cleaned, and inspected for exclusion criteria. The teeth were scanned with an intraoral scanner and identified using a texture-based CNN in three steps. First, through preprocessing, teeth images were segmented by extracting the front-facing region of the teeth. Then, texture features were extracted from the segmented teeth images using the discrete wavelet transform (DWT) method. Finally, deep learning-based enhanced CNN models were used to identify these images. Several experiments were conducted using five different CNN models with various batch sizes and epochs, with and without augmented data. RESULTS: Based on experiments with five different CNN models, the highest accuracy achieved was 0.8 and the precision was 0.8 with a loss value of 0.9, a batch size of 32, and 250 epochs. A comparison of deep learning models with different parameters showed varied accuracy between the different classes of teeth. CONCLUSION: The accuracy of the point-based CNN method was promising. This texture-identification method will pave the way for many forensic and prosthodontic applications and will potentially help improve the precision of dental biometrics.

Anti-Inflammatory Therapy for Temporomandibular Joint Osteoarthritis Using mRNA Medicine Encoding Interleukin-1 Receptor Antagonist.

Messenger RNA (mRNA) is an emerging drug modality for protein replacement therapy. As mRNA efficiently provides protein expression in post-mitotic cells without the risk of insertional mutagenesis, direct delivery of mRNA can be applied, not only as an alternative to gene therapy, but also for various common diseases such as osteoarthritis (OA). In this study, using an mRNA-encoding interleukin-1 receptor antagonist (IL-1Ra), we attempted anti-inflammatory therapy in a rat model of the temporomandibular joint (TMJ) OA, which causes long-lasting joint pain with chronic inflammation. For the intra-articular injection of mRNA, a polyplex nanomicelle, our original polymer-based carrier, was used to offer the advantage of excellent tissue penetration with few immunogenic responses. While the protein expression was transient, a single administration of IL-1Ra mRNA provided sustained pain relief and an inhibitory effect on OA progression for 4 weeks. The mRNA-loaded nanomicelles provided the encoded protein diffusely in the disc and articular cartilage without upregulation of the expression levels of the pro-inflammatory cytokines IL-6 and tumor necrosis factor-α (TNF-α). This proof-of-concept study demonstrates how anti-inflammatory proteins delivered by mRNA delivery using a polyplex nanomicelle could act to alleviate OA, stimulating the development of mRNA therapeutics.

Investigation of stress distribution within an endodontically treated tooth restored with different restorations.

Background/purpose: Recently, metal-free restoration has become the standard in prosthetic treatment. However, it is still unclear which combination is most effective in preventing root fracture and secondary caries. The purpose of this study was to evaluate the influence of different post systems, crown materials, crown thickness and luting agents on the stress distribution around the crown margins, cervical dentin and the tip of the post. Materials and methods: Ninety-six mandibular first premolar models were developed and analyzed using finite element analysis (FEA). Two designs of crowns, six kinds of crown materials, four types of post and core systems and two kinds of luting agents were included and evaluated for the stress distribution within the abutment teeth. The Von Mises stress magnitudes were compared among all models. Results: The stress at the tip of the post decreased as the young's modulus of luting agent decreased; The stress concentrated more at the cervical area (dentin and crown), as the physical properties of the crown material increased. Conclusion: Crowns fabricated using polyetheretherketone (PEEK) can reduce the stress concentration at the cervical area, so it may be possible to reduce the amount of tooth reduction during abutment tooth preparation. The stress distribution around the post tip is affected by the post and core systems and luting agent, regardless of crown materials and thickness. When inserting a post of the higher Young's modulus such as zirconia post, methyl methacrylate luting cement can reduce the stress concentration at the tip of the post.

Local Injection of Hydroxyapatite Electret Ameliorated Infarct Size After Myocardial Infarction.

Background: Previous studies showed that hydroxyapatite electret (HAE) accelerates the regeneration of vascular endothelial cells and angiogenesis. This study investigated the effects of HAE in myocardial infarction (MI) model mice. Methods and Results: MI was induced in mice by ligating the left anterior descending artery. Immediately after ligation, HAE, non-polarized hydroxyapatite (HAN), or water (control) was injected into the infarct border myocardium. Functional and histological analyses were performed 2 weeks later. Echocardiography revealed that HAE injection preserved left ventricular systolic function and the wall thickness of the scar, whereas HAN-injected mice had impaired cardiac function and thinning of the wall, similar to control mice. Histological assessment showed that HAE injection significantly attenuated the length of the scar lesion. There was significant accumulation of CD31-positive cells and increased expression of vascular endothelial growth factor (Vegf), intercellular adhesion molecule-1 (Icam1), vascular cell adhesion molecule-1 (Vcam1), hypoxia-inducible factor-1α (Hif1a), and C-X-C motif chemokine ligand 12 (Cxcl12) genes in the infarct border zone of HAE-injected mice. These effects were not induced by HAN injection. Anti-VEGFR2 antibody canceled the beneficial effect of HAE. In vitro experiments in a human cardiovascular endothelial cell line showed that HAE dose-dependently increased VEGFA expression. Conclusions: Local injection of HAE attenuated infarct size and improved cardiac function after MI, probably due to angiogenesis. The electric charge of HAE may stimulate angiogenesis via HIF1α-CXCL12/VEGF signaling.

Influence of high-speed sintering protocols on translucency, mechanical properties, microstructure, crystallography, and low-temperature degradation of highly translucent zirconia.

OBJECTIVES: Impacts of high-speed sintering on the optical and mechanical properties, microstructure, crystallography, and low-temperature degradation of commercial yttria-partially stabilized zirconia (Y-PSZ) were investigated. METHODS: Five commercial Y-PSZ products (KATANA HT, KATANA STML, KATANA UTML, Zpex 4, and Zpex Smile) were investigated. Specimens were sintered following speed-sintering (~90 min) and conventional-sintering protocols (~7 h), and a group of KATANA STML was super-speed-sintered (18 min). Dimensions of the zirconia specimens after sintering were 14.5 mm (diameter) and 1.2 mm (thickness). Translucency was assessed using a colorimeter. Biaxial flexural strength was measured using a universal testing machine, followed by Weibull analysis. Scanning electron microscopy was used for microstructure assessments. X-ray diffraction was used to analyze the crystallography before and after hydrothermal aging. Low-temperature degradation (LTD) tests were performed at 134 °C under 2-3 bar water vapor in an autoclave. RESULTS: The translucency and flexural strength were not affected significantly by the sintering programs (p > 0.05). The conventionally sintered KATANA STML and speed-sintered Zpex 4 presented the highest and lowest Weibull modulus, respectively. The conventionally-sintered Y-PSZ had a larger average grain size and smaller fraction of fine grains than those of the speed-sintered specimens. The fractographic analysis of the speed- and conventionally sintered Y-PSZ yielded comparable results. The speed-sintered Y-PSZ exhibited a lower c-ZrO2 content than that of conventionally-sintered Y-PSZ, except for KATANA HT and KATANA STML. LTD tests indicated that some of the speed and conventionally-sintered Y-PSZ exhibited similar monoclinic volume fractions. SIGNIFICANCE: Speed-sintering programs are acceptable for Y-PSZ zirconia.

Development of 4-META/MMA-TBB resin with added benzalkonium chloride or cetylpyridinium chloride as antimicrobial restorative materials for root caries.

To develop antimicrobial restorative materials for root caries, we assessed a 4-META/MMA-TBB resin (Bondfill SB Plus, Sun Medical) containing benzalkonium chloride (BAC) or cetylpyridinium chloride (CPC) at 1.25, 2.5, and 5.0 wt%. The same resin without antibacterial agent was used as control. The degree of conversion was measured by attenuated total reflectance-Fourier transform infrared spectroscopy. The 3-point flexural strength test was conducted according to ISO 4049. The antimicrobial effect against three oral bacteria (Streptococcus mutans, S. sobrinus, and Actinomyces naeslundii) was assessed using agar diffusion tests. The shear bond strength to root dentin was assessed after 24 h of storage in water with or without 10,000 thermal cycles. The shear bond strength data were statistically compared using a linear mixed-effects model (α = 0.05). The specimen with 5.0 wt% BAC showed a significantly higher degree of conversion than the control, but it also had significantly lower flexural strength and lower shear bond strength after thermal cycling than the other specimens. When BAC or CPC was added at ≥ 2.5 wt%, the resins inhibited the growth of the three investigated microbes. In conclusion, both BAC and CPC showed significant antimicrobial effects when added at 5.0 wt% to the 4-META/MMA-TBB resin. Up to 2.5 wt%, neither antimicrobial agent affected the degree of conversion, flexural strength, or shear bond strength of the resin.

Influence of sintering conditions on translucency, biaxial flexural strength, microstructure, and low-temperature degradation of highly translucent dental zirconia.

There is limited research on the influence of different sintering temperatures on the properties of highly translucent zirconia ceramics. This study demonstrated the influence of different sintering temperatures on the translucency, crystallographic structure, biaxial flexural strength, microstructure, and low-temperature degradation (LTD) of three highly translucent zirconia grades, i.e., 3 mol% yttria-stabilized tetragonal zirconia polycrystals (3Y-TZP), 4 mol% yttria-partially-stabilized zirconia (4Y-PSZ), and 5 mol% yttria-PSZ (5Y-PSZ). The specimens were characterized using colorimetry, X-ray diffraction, scanning electron microscopy, Weibull analysis, and LTD tests (134°C; 20 h). The increase in the sintering temperature did not affect the translucency of 3Y-TZP, whereas it increased the translucencies of 4Y-PSZ and 5Y-PSZ. All the zirconia grades exhibited grain enlargement and unchanged biaxial flexural strengths with the increase in the sintering temperature. The degradation of 3Y-TZP and 4Y-PSZ at a sintering temperature of 1,600°C was faster than that at other sintering temperatures.

Additively Manufactured Zirconia for Dental Applications.

We aimed to assess the crystallography, microstructure and flexural strength of zirconia-based ceramics made by stereolithography (SLA). Two additively manufactured 3 mol% yttria-stabilized tetragonal zirconia polycrystals (3Y-TZP: LithaCon 3Y 230, Lithoz; 3D Mix zirconia, 3DCeram Sinto) and one alumina-toughened zirconia (ATZ: 3D Mix ATZ, 3DCeram Sinto) were compared to subtractively manufactured 3Y-TZP (control: LAVA Plus, 3M Oral Care). Crystallographic analysis was conducted by X-ray diffraction. Top surfaces and cross-sections of the subsurface microstructure were characterized using scanning electron microscopy (SEM). Biaxial flexural strength was statistically compared using Weibull analysis. The additively and subtractively manufactured zirconia grades revealed a similar phase composition. The residual porosity of the SLA 3Y-TZPs and ATZ was comparable to that of subtractively manufactured 3Y-TZP. Weibull analysis revealed that the additively manufactured LithaCon 3Y 230 (Lithoz) had a significantly lower biaxial flexural strength than 3D Mix ATZ (3D Ceram Sinto). The biaxial flexural strength of the subtractively manufactured LAVA Plus (3M Oral Care) was in between those of the additively manufactured 3Y-TZPs, with the additively manufactured ATZ significantly outperforming the subtractively manufactured 3Y-TZP. Additively manufactured 3Y-TZP showed comparable crystallography, microstructure and flexural strength as the subtractively manufactured zirconia, thus potentially being a good option for dental implants.

Strain analysis of anterior resin-bonded fixed dental prostheses with different thicknesses of high translucent zirconia.

BACKGROUND/PURPOSE: High translucent zirconia has been used as a new monolithic zirconia prosthesis, which has the potential to make anterior resin-bonded fixed dental prostheses (RBFDPs) without veneering porcelain. However, it is unclear whether the RBFDPs retainer can be thinned as much as conventional zirconia RBFDPs. The aim of this study was to assess the usability of high translucent zirconia RBFDPs with a thin retainer thickness by evaluating differences in retainer thickness on the surface strain. MATERIALS AND METHODS: A model with a missing upper lateral incisor was used. The abutment teeth were upper central incisor and canine. Three types of RBFDPs were fabricated as follows: metal RBFDPs with a retainer thickness of 0.8 mm (0.8M), and high translucent zirconia RBFDPs with a retainer thicknesses of 0.8 and 0.5 mm (0.8Z, 0.5Z) (n = 10). The fitness of the margins was evaluated by the silicone replica technique. The surface strain of each retainer under static loading was measured and statistically analyzed using a t-test with Bonferroni correction. RESULTS: The marginal fitness of all RBFDPs was under 76.1 µm, which was clinically acceptable. Each strain of the 0.8Z and 0.5Z groups was significantly lower than that of the 0.8M (p < 0.05). There was no difference in strain of the zirconia RBFDPs even if the retainer thickness was changed. CONCLUSION: Our results suggest that the high translucent zirconia RBFDPs can be manufactured with a retainer thickness of 0.5 mm, which reduces the amount of tooth preparation compared to the metal RBFDPs.

Degree of conversion and dentin bond strength of light-cured multi-mode adhesives pretreated or mixed with sulfinate agents.

The influence of sulfinate agents applied as a dentin pretreatment or a mixture with multi-mode one-step self-etch adhesives (1-SEAs) on the degree of conversion (DC) and micro-tensile bond strength (µTBS) of light-cured 1-SEAs was investigated. 1-SEAs Clearfil Universal Bond Quick (UBQ) or Scotchbond Universal Adhesive (SBU) were applied to dentin in etch&rinse or self-etch mode using various application strategies: 1) no pretreatment, 2) pretreatment with 90 wt% ethanol, 3) pretreatment with a sulfinate agent Clearfil DC Activator (UDC) or Scotchbond Universal DCA (SDC), or 4) a mixture of UBQ+UDC or SBU+SDC. µTBS was measured after 24 h. Additionally, DC was measured using attenuated total reflectance Fourier-transform infrared spectroscopy. Pretreatment with sulfinate agents resulted in the highest µTBS and DC, significantly improving them especially in etch&rinse mode. The mixture of sulfinate agents with 1-SEAs was less effective. Pretreatment with ethanol significantly improved µTBS in etch&rinse mode but compromised µTBS in self-etch mode.