Anaerobic digestion of process water from hydrothermal treatment processes: a review of inhibitors and detoxification approaches.

Integrating hydrothermal treatment processes and anaerobic digestion (AD) is promising for maximizing resource recovery from biomass and organic waste. The process water generated during hydrothermal treatment contains high concentrations of organic matter, which can be converted into biogas using AD. However, process water also contains various compounds that inhibit the AD process. Fingerprinting these inhibitors and identifying suitable mitigation strategies and detoxification methods is necessary to optimize the integration of these two technologies. By examining the existing literature, we were able to: (1) compare the methane yields and organics removal efficiency during AD of various hydrothermal treatment process water; (2) catalog the main AD inhibitors found in hydrothermal treatment process water; (3) identify recalcitrant components limiting AD performance; and (4) evaluate approaches to detoxify specific inhibitors and degrade recalcitrant components. Common inhibitors in process water are organic acids (at high concentrations), total ammonia nitrogen (TAN), oxygenated organics, and N-heterocyclic compounds. Feedstock composition is the primary determinant of organic acid and TAN formation (carbohydrates-rich and protein-rich feedstocks, respectively). In contrast, processing conditions (e.g., temperature, pressure, reaction duration) influence the formation extent of oxygenated organics and N-heterocyclic compounds. Struvite precipitation and zeolite adsorption are the most widely used approaches to eliminate TAN inhibition. In contrast, powdered and granular activated carbon and ozonation are the preferred methods to remove toxic substances before AD treatment. Currently, ozonation is the most effective approach to reduce the toxicity and recalcitrance of N and O-heterocyclic compounds during AD. Microaeration methods, which disrupt the AD microbiome less than ozone, might be more practical for nitrifying TAN and degrading recalcitrant compounds, but further research in this area is necessary.

Efficiency of Blenke cascade system for continuous bio-ethanol fermentation.

A gas lift-system with inserts (so-called Blenke cascade system) for continuous bio-ethanol fermentation was constructed. Gas introduced at the bottom of the column created toroidal vortices in the fluid cells between inserts, enhancing mixing and improving residence time behavior without stirring equipment being necessary. The parameters mash type, start-up strategy, yeast-recycle model and yeast separation were studied concerning the efficiency of the ethanol production. The best results obtained were for a filtered mash, a double saccharification principle (DSP), a batch start-up strategy, an activation-recycle model and a lamella settler connected in series with a small conventional gravitational settler for yeast cells separation. Using this system, the fermentation residence time was τ=4-5.5h, depending on substrate type. Eighty five percent of the yeast cells could be separated. High volumetric ethanol productivity (Q(p)=20.43g/Lh) and yield E(y)=98% were achieved. Continuous fermentation, yeast recycling and sedimentation were contamination-free processes.