ABSTRACT
Background/Objectives: The aim of this study was to quantify the threshold of a dental midline shift that would compromise facial attractiveness and indicate a need for treatment from the points of view of laypeople and dental professionals. Methods: Whole-face natural photographs of a male and a female model were digitally manipulated to create various degrees of upper and lower dental midline shifts through bodily movement of the upper or lower midlines as well as alteration of the axial inclination of the upper teeth. The samples were then assessed by two groups of observers (laypeople (LP) and dental professionals (DP)). Results: The lower midline shift did not negatively affect the DP and LP's perceptions of smile attractiveness. The first significant loss of attractiveness was registered by the DP with an upper midline shift of 1 mm in the female model. However, the LP registered this at 2 mm. The DP registered the necessity of treatment at a threshold of 2 mm in the female model and 3 mm in the male model. LP identified the need for treatment at 3 mm for both males and females. The female model was judged more critically than her male counterpart by both female and male observers. Conclusions: DP assess the midline deviation more critically than LP. Both DP and LP were more sensitive to midline deviations in the female model regardless of their own gender. Both groups registered the need for treatment at a higher threshold than the reduction in smile attractiveness.
ABSTRACT
BACKGROUND: To compare and investigate the effects of intraoral ageing on the thickness of one group of directly printed and two groups of thermoformed aligners on the labial surface of maxillary central incisors. MATERIALS AND METHODS: Six groups (12 samples per group) were included in this prospective in vivo experiment. Groups DP-Clin, INV-Clin and CA-Clin consisted of directly printed (Tera Harz TC-85 DAC resin), thermoformed (Invisalign, PU based polymer) and in house thermoformed (CA-Pro, PET-G based polymer) aligners, retrieved after 1 week of intraoral service. Groups DP-Ctr, INV-Ctr and CA-Ctr included unused aligners samples. Thickness measurements were conducted using confocal laser scanning microscopy (CLSM). Data that underwent log-10 transformation was analysed by multiple linear regression analysis (p < .05). RESULTS: Statistically significant differences were found between the materials in both Clin and Ctr categories (p < .001). Group DP had the highest thickness among the groups and the least thickness was observed in the CA group (p < .001). However, intraoral ageing did not significantly affect the aligner thickness of any groups. CONCLUSIONS: Both thermoforming and direct printing of clear aligners led to thickness deviations in terms of increase for printed aligners and decrease for thermoformed aligners. Intraoral ageing did not affect the aligner thickness in any of the groups.
ABSTRACT
BACKGROUND: Tinnitus is a quite common and bothersome disorder that results in a perceived sound or noise, without an external origin, often causing notable psychological distress. Some interconnections between tinnitus, bodily pain perception, and psychological well-being were previously reported, thus the relationships between tinnitus and temporomandibular joint (TMJ)-related muscle issues, resulting in somatosensory tinnitus, must be deeply investigated. This study aims to assess the prevalence of tinnitus in patients with temporomandibular disorders (TMD) and to examine the correlation between tinnitus and scales assessing the severity of TMD as well as psychological-related parameters. MATERIALS AND METHODS: In this cross-sectional study, a total of 37 adults with TMD symptoms were enrolled. Diagnostic data were collected using the Axis II of the Diagnostic Criteria for Temporomandibular Disorders (DC/TMD) and the Tinnitus Handicap Inventory (THI) questionnaire. Statistical analysis included descriptive assessments and significance was set at p < .05. RESULTS: Individuals with tinnitus and TMD reported a significantly higher number of body pain areas, indicating a link between tinnitus and increased bodily pain perception. Tinnitus did not significantly impact TMJ-related functions. Significantly higher levels of psychological distress were observed in individuals with tinnitus, as evidenced by elevated scores in depression, generalised anxiety and somatic symptoms. CONCLUSION: Tinnitus is a complex condition with significant effects on health and well-being, requiring an interdisciplinary approach for effective evaluation and care. The study provides deep insights into the prevalence of tinnitus in TMD patients, underscoring the need for comprehensive treatment strategies addressing both TMD and tinnitus.
Subject(s)
Temporomandibular Joint Disorders , Tinnitus , Humans , Tinnitus/psychology , Tinnitus/epidemiology , Tinnitus/complications , Tinnitus/physiopathology , Temporomandibular Joint Disorders/psychology , Temporomandibular Joint Disorders/complications , Temporomandibular Joint Disorders/physiopathology , Temporomandibular Joint Disorders/epidemiology , Female , Male , Cross-Sectional Studies , Adult , Middle Aged , Prevalence , Surveys and Questionnaires , Disability Evaluation , Pain Measurement , Severity of Illness Index , Young Adult , AgedABSTRACT
OBJECTIVES: This study aimed to evaluate the position of the mandibular lingula (ML) in adult patients (aged between 18 and 35 years old) with different skeletal and growth patterns using cone-beam computed tomography (CBCT). DESIGN: Cross-sectional. SETTING: Dentistry department of University. SUBJECTS: Subjects comprised CBCT images of 150 adult patients, including 300 rami. METHODS AND MATERIALS: In total, 150 CBCT aged between 18 and 35 were selected and divided into three main groups of 50 samples based on their skeletal relationships (classes I, II and III). Patients were subdivided based on their growth pattern (vertical vs. horizontal), resulting in 25 samples per subgroup. Distances between the mandibular lingula and occlusal plane (ML-OP), sigmoid notch (ML-SN), external oblique ridge (ML-EOR), internal oblique ridge (ML-IOR), posterior border of the ramus (ML-PBR), inferior border of the ramus (ML-IBR), and horizontal and vertical distances to the mandibular foramen (ML-hMF and ML-vMF). One-way ANOVA variance analysis was employed to compare different angle classifications, and Bonferroni analysis was used for multiple comparisons. The Student's t-test was also used to compare growth patterns within each main group and genders within the subgroup. RESULTS: The study revealed statistically significant differences in the position of the mandibular lingula between different angle classifications, growth patterns, and genders. Class II samples showed a more anterior position of the ML, whereas Class III samples displayed a more posterior position of the ML. Patients with horizontal growth patterns and Angle Class III had a more posteriorly positioned ML. Gender differences were observed, particularly in Class I and Class III classifications, suggesting that gender may influence the variability of ML position in these specific classifications. CONCLUSION: The position of the mandibular lingula showed high variability among individuals with different angle classifications, growth patterns and genders.
Subject(s)
Cone-Beam Computed Tomography , Imaging, Three-Dimensional , Mandible , Humans , Cone-Beam Computed Tomography/methods , Mandible/diagnostic imaging , Mandible/growth & development , Mandible/anatomy & histology , Adult , Female , Male , Adolescent , Cross-Sectional Studies , Young Adult , Imaging, Three-Dimensional/methods , Cephalometry/methods , Malocclusion, Angle Class I/diagnostic imaging , Malocclusion, Angle Class I/pathology , Malocclusion, Angle Class II/diagnostic imaging , Malocclusion, Angle Class II/pathology , Malocclusion, Angle Class III/diagnostic imaging , Malocclusion, Angle Class III/pathologyABSTRACT
OBJECTIVE: To assess if the dental follicle volume of palatally impacted canines (PICs) affects the relative root position of the adjacent lateral incisors (LIs) and first premolars (FPs). MATERIALS AND METHODS: A retrospective cross-sectional study of 49 patients with unilaterally PICs with dental follicles who had CBCT imaging previously taken. Four orthodontic centers in different countries provided the sample. A mean difference of 5° between the angular measurements (mesiodistal tip, buccolingual inclination, or mesiodistal rotation) of the LI and FP adjacent to the PIC and the controls was considered clinically relevant. A value of 0.05 was set for significance level and a power of 80%. The minimum sample size was determined to be 26 patients. These patients were further assigned to an LI sample (nâ =â 49) and an FP sample (nâ =â 23), dependent on the direct contact of the dental follicle to that adjacent tooth. A manual segmentation technique was used to obtain the volumetric measurements of the dental follicle. Angular measurements of adjacent teeth were then compared to the contralateral nonimpacted side, which acted as the control. A multivariant regression analysis was performed using IBM SPSS software, and statistical significance was set at αâ =â 0.05. RESULTS: Adequate intra-rater reliability was accomplished. The multivariant regression analysis implied that there is no difference in the mean change in the tip, torque, and rotation of the LI and FP between the impacted and control sides when dental follicle volumes are considered (Pâ =â .509 for the LI sample and Pâ =â .804 for the FP sample). LIMITATIONS: CBCT imaging of dental follicle border delimitations, partial volume effect, and scattering are limitations. This is a convenience sample where the FP subsample is small. CONCLUSION: The dental follicle volume of the PICs does not seem to influence the relative position of the adjacent LI and FP mesiodistal tip, buccolingual inclination, and mesiodistal rotation. Early intervention could have been suggested to avoid certain malocclusion traits if significant displacements were demonstrated.
Subject(s)
Dental Sac , Tooth, Impacted , Humans , Dental Sac/diagnostic imaging , Retrospective Studies , Reproducibility of Results , Cross-Sectional Studies , Cuspid/diagnostic imaging , Tooth, Impacted/diagnostic imaging , Cone-Beam Computed Tomography/methods , MaxillaABSTRACT
BACKGROUND: The occurrence of mandibular canine impaction and/ or transmigration is a rare clinical entity but diagnosis and treatment planning is of clinical significance. The associated etiological factors and the clinical guidelines for the management are still not clear. The aim of this systematic review was to summarize the available data to report the prevalence and identify the etiological factors, clinical features, and various treatment outcomes in patients with mandibular canine impaction and/or transmigration. METHODS: The review protocol was registered in PROSPERO (CRD42021222566) and was conducted and reported according to the PRISMA and Cochrane Handbook / Preferred Reporting Items for Systematic Reviews and Meta-Analyses statement. A computerized search of studies published up to April 30, 2023, was conducted using the following databases: Medline, Cochrane Database of Systematic Reviews, Cochrane Central Register of Controlled Trials, Scopus, Web of Science, and Latin American and Caribbean Health Sciences Literature. A manual search of the reference and citation lists of eligible articles and existing systematic reviews for any additions were also conducted. The Newcastle-Ottawa Scale quality assessment tool was used to assess the studies' quality. RESULTS: After removing 6 duplicates, 3700 articles were identified. For the final analysis, 19 studies published between 1985 and 2023 met all the eligibility criteria and were included. A total of 7 studies presented as good and 12 studies presented as satisfactory. Patients were screened in ten studies and diagnostic records from archives were retrieved in nine studies. The total number of diagnostic records screened was 138.394, and the total number of patients from the included studies was 43.127. CONCLUSIONS: Based on the findings from this systematic review, the prevalence of mandibular canine impaction ranged from 0.008% to 1.29% while canine transmigration from 0.12% to 0.98%. Crowding of the mandibular arch, the presence of a retained deciduous canine, and odontoma or cyst are the etiological factors more commonly associated with mandibular canine impaction and or transmigration. Surgical extraction and surgical exposure followed by orthodontic traction are the two most frequently carried out treatment modalities in the management of mandibular canine impaction and or transmigration.
Subject(s)
Mandible , Tooth, Impacted , Humans , Prevalence , Tooth, Impacted/epidemiology , Tooth, Impacted/etiology , Tooth, Impacted/therapy , Treatment Outcome , CuspidABSTRACT
The aim of the study was to investigate how obesity can influence sleep respiratory parameters in obstructive sleep apnea syndrome (OSAS) in children. METHODS: The study analyzes 56 Caucasian children and adolescents aged 11 ± 2.79 years with a BMI > 5th percentiles and a PSQ value ≥ 0.33. Children were divided into Obesity Group (OG) with BMI ≥ 95th and Control Group (CG) with 5th < BMI > 95th percentile. All selected children underwent PG. Respiratory parameters AHI (Apnea-Hypopnea Index), SaO2 (Saturation of Oxygen), ODI (Oxygen Desaturation Index), and Nadir (the lowest value of SaO2 registered during PG) were extracted from the PG. AHI was used to divide the severity of OSAS into four levels: snoring (AHI ≤ 1), mild (AHI > 1 and ≤5), moderate (AHI > 5 and <10), and severe (AHI ≥ 10). RESULTS: The comparison analysis between the OG and CG showed a statistical significance only for ODI (p = 0.02). A statistically significant correlation between BMI and AHI (r = 0.02), SaO2 (r = 0.01), and Nadir O2 (r = 0.02) was found. CONCLUSIONS: There was no strong correlation between obesity and OSAS, but a positive association was found between BMI and AHI severity.
ABSTRACT
BACKGROUND: Interceptive orthodontic treatment aims to eliminate factors that prevent the harmonious development of the maxillary and mandibular arches during childhood, and elastodontic appliances (EAs) represent a group of devices with an increasingly important role. This systematic narrative hybrid review (HR) aims to provide an overview of the clinical indications for the use of EAs according to the available evidence and to identify potential research areas for unexplored applications. MATERIALS AND METHODS: To assess the available literature on the subject, selective database searches were performed between July 2023 and September 2023. With the assistance of a health sciences librarian, a search strategy that utilized terms related to elastodontic therapy was developed. Embase, Scopus, PubMed, and Web of Science were the databases used. RESULTS: The current literature addressing the usability of EAs is scarce and mostly limited to case reports and case series. After 2168 citations were found through the searches, 13 studies were ultimately included. In this regard, information about the clinical use and effectiveness of EAs are reported in a narrative form, defining specific domains of the application that are clinically oriented, including sagittal and transversal discrepancies, atypical swallowing, teeth malposition, two-phase orthodontics and a lack of teeth retention. CONCLUSIONS: Within the intrinsic quality limitation of the available literature, it seems that EAs may represent a promising treatment alternative for managing mild-to-moderate malocclusion in children as an adjuvant therapy to the interruption of spoiled habits.
ABSTRACT
INTRODUCTION: The present study aimed to investigate the effectiveness of low-level laser therapy (LLLT) use before in-office bleaching to prevent an increase in the risk and intensity of tooth sensitivity. METHODS: Thirty patients were selected. Before bleaching with 38% hydrogen peroxide, the participants were randomly divided into two groups of 15 subjects. Test group: the patients' teeth were subjected to a preliminary LLLT procedure by an 810 nm diode laser with 0.5 W for 30 s for an energy density of 15 J/cm2 and a group placebo. All patients were instructed to report their cold sensitivity experiences immediately, 1 h, 24 h, and 48 h after the end of bleaching via a VAS score. RESULTS: The results obtained show an increase in VAS values for both groups (290 and 490 vs. 224 and 234 of baseline time of test and placebo group, respectively); afterward, the VAS value seemingly decreases at 1 h after the end of bleaching, approaching the baseline VAS for the test group (274) in comparison to the placebo group. CONCLUSIONS: The use of preliminary diode LLLT could represent a valid possibility to reduce the occurrence of tooth sensitivity post-whitening and shorten recovery time in cases where tooth sensitivity occurs.
ABSTRACT
BACKGROUND: The study's objective was to assess the accuracy (trueness and precision) of orthodontic models obtained from crowded and spaced dentition finalized for the production of clear aligners. Four 3D printers featuring different technologies and market segments were used for this purpose. METHODS: Two digital master models were obtained from two patients featuring respectively crowded dentition (CM group) and diastema/edentulous spaces (DEM group). The 3D printers tested were: Form 3B (SLA technology, medium-professional segment), Vector 3SP (SLA technology, industrial segment), Asiga Pro 4K65 (DLP technology, high-professional segment), and Anycubic Photon M3 (LCD technology, entry-level segment). Each 3D printed model was scanned and superimposed onto the reference master model and digital deviation analysis was performed to assess the trueness and precision calculated as root mean square (RMS). All data were statistically examined to obtain intra-group and inter-groups comparisons(p 0.05). RESULTS: In both CM and DEM groups, SLA 3D printers (Vector 3SP and Form 3B) showed lower trueness error compared to DLP/LCD technologies (Asiga Pro 4K65, Anycubic Photon M3) (p < 0.001). In general, the entry-level printer (Anycubic Photon M3) showed the greatest trueness error (p < 0.001). Comparing CM and DEM models generated with the same 3D printer, statistically significant differences were found only for Asiga Pro 4k65 and Anycubic Photon M3 printers (p > 0.05). Concerning data of precision, the DLP technology (Asiga Pro 4k65) showed lower error compared to the other 3D printers tested. The trueness and precision errors were within the accepted clinical error for clear aligner manufacturing (< 0.25 mm), with the entry-level 3D printer nearly reaching this value. CONCLUSIONS: The accuracy of orthodontic models generated for clear aligners can be affected by different 3D printer technologies and anatomical characteristics of dental arches.
Subject(s)
Orthodontic Appliances, Removable , Printing, Three-Dimensional , Humans , Models, Dental , Dentition , Technology , Computer-Aided DesignABSTRACT
OBJECTIVES: The objectives of this systematic review were to evaluate the correlation between Ultrasound (US) and Magnetic Resonance Imaging (MRI) in patients with JIA and to investigate the association with Temporomandibular Disorders (TMD). MATERIALS AND METHODS: The protocol was registered in PROSPERO (CRD42022312734). Databases Medline, Embase, Cochrane Central Register of Controlled Trials, Scopus, Web of Science, Latin American and Caribbean Health Sciences Literature were searched. Eligibility criteria were patients with JIA subjected to diagnostic evaluation using US and MRI. No language restrictions were applied. After duplicate study selection, data extraction and risk of bias assessment according to Cochrane were conducted. Data extraction of patients was conducted by two independent authors. RESULTS: Five observational studies were included with 217 participants (153 females and 64 males; mean age 11.3 years). The quality of the studies was overall satisfactory. The correlation between US and MRI in children with JIA was 'moderate' in acute arthritis while the chronic arthritis correlated positively in two studies. CONCLUSIONS: Even if MRI remains the more accurate imaging modality for the detection of TMJ of patients with JIA, US may be useful to early detect pathological conditions and to address the patient with JIA and putative TMJ involvement to a more accurate diagnosis with MRI and consequent appropriate treatment management. CLINICAL RELEVANCE: MRI should be deemed necessary only secondary to less-invasive assessments with US just to confirm the diagnosis or to increase sensitivity, accuracy of positive predictive values detected.
Subject(s)
Arthritis, Juvenile , Temporomandibular Joint Disorders , Male , Child , Female , Humans , Arthritis, Juvenile/diagnostic imaging , Arthritis, Juvenile/complications , Temporomandibular Joint/diagnostic imaging , Temporomandibular Joint/pathology , Temporomandibular Joint Disorders/complications , Magnetic Resonance Imaging/methods , UltrasonographyABSTRACT
Objective: Compliance is critical for successful outcomes in orthodontics, and personality traits may play a role in determining patient adherence. This study aimed to monitor compliance during treatment with removable clear aligners (CA) [Align Technology Inc, San José, Calif ], and evaluate the influence of motivational techniques and the patient's profiles assessed through the psychological well-being (PWB) questionnaire on clinical outcomes. Methods: Thirty-nine consecutive patients in permanent dentition seeking treatment with CA were recruited from two universities. Casts were obtained before treatment and after 3, 6, and 12 months and the corresponding digital Clincheck©.STL files were used to calculate the discrepancy index to check for differences between virtual and real treatment stages. Patients were divided into two groups: the Case group, which received motivational techniques at each appointment, and the control group which received instructions only at the beginning. Psychological profiles were evaluated before treatment (T0) and after 3 (T1), 6 (T2), and 12 (T3) months. Results: There were no differences between the Case and Control groups regarding the use of motivational reminders. The analysis of the PWB showed that almost all values increased, and there was a strong correlation between dental casts and correspondent. STL files at every time point. The PWB showed increased values from T0 to T3 in the sample. Conclusion: Motivational techniques did not affect patient compliance, and treatment outcomes were achieved as planned. The PWB of all patients improved throughout the treatment with CA.
ABSTRACT
AIM: The aim of this study was to evaluate the segmentation accuracy of dentition testing four free-source semi-automatic software. MATERIALS AND METHODS: A total of 20 cone-beam computed tomography (CBCT) were selected to perform semi-automatic segmentation of maxillary and mandibular dentition. The software tested were Invesalius, ITK-Snap, 3D Slicer and Seg3D. Each tooth model was also manually segmented (Mimics software) and set as the gold standard (GS) reference of the investigation. A specific 3D imaging technology was used to perform the superimposition between the teeth models obtained with semi-automatic software and the GS model, and to perform the surface-to-surface matching analysis. The accuracy of semi-automatic segmentation was evaluated calculating the volumetric mean differences (mean bias and limits of agreement) and the percentage of matching of the tooth models compared to the manual segmentation (GS). Qualitative assessments were performed using color-coded maps. All data were statistically analysed to perform software comparisons. RESULT: Statistically significant differences were found in the volumetric and matching percentage data (p < 0,05). Invesalius was the most accurate software for 3D rendering of the dentition with a volumetric bias (Mimics) ranging from 4,59 mm3 to 85,79 mm3; instead, ITK-SNAP showed the higher volumetric bias, ranging from 30,22 mm3 to 319,83 mm3. The dis-matched area was mainly located at the radicular region of the teeth. Volumetric data showed excellent inter-software reliability with coefficient values ranging from 0,951 to 0,997. CONCLUSIO: Different semi-automatic software algorithms could generate different patterns of inaccuracy error in the segmentation of teeth.
ABSTRACT
OBJECTIVE: The aim of this prospective cross sectional study was to evaluate the cranial structure and condylar asymmetry of adult patients with rheumatoid arthritis (RA) diagnosed after 25 years of age compared to a healthy adult control group. METHODS: Eighteen adult patients (57.4 ± 11.4 years) with RA were compared with a control group. Cephalometric analysis and the Habets method for the calculation of the condylar asymmetry were used. The main cephalometric data investigated were focused on the diagnosis of hyperdivergent cranial structure (NSL/ML, NL/ML), backwards rotation of the mandible (Fh/ML), short vertical ramus (Ar:Go), steep mandibular plane (ML/Oc). RESULTS: The cephalometric data considered were not significantly different in the RA vs controls except for the steepness of the occlusal plane (NL/Oc), which was steeper in the patients group (P < 0.02) and the ramus of the mandible which was greater in patients. The asymmetry of the condyles was significant (P < 0.003) and different from the control group, but that of the ramus was not. CONCLUSIONS: In this study, RA patients diagnosed after 25 years of age did not show a different pattern of growth with respect to the control group. As expected, the condyles showed a difference being asymmetrical in RA patients due to the high turnover of this joint reacting to severe systemic inflammation in conditions of continuous functional work, load and forces. This study follows a previous study with the same research plan conducted on young JIA patients who showed a different pattern of growth of the skull leading to a severe hyperdivergent cranial structure with backward rotation of the mandible; this is mainly due to the insufficient growth of the condylar site exposed to the inflammatory process during development. Unlike JIA patients, this study showed that RA patients follow an individual growth pattern not affected by inflammation, even if they show joint asymmetry.
Subject(s)
Arthritis, Rheumatoid , Skull , Humans , Adult , Cross-Sectional Studies , Prospective Studies , Arthritis, Rheumatoid/complications , Inflammation , PolymersABSTRACT
OBJECTIVES: To identify and analyze the 50 most cited articles on temporary anchorage devices (TADs) and investigate the achievement and development of scientific research about the topic through a bibliometric analysis. MATERIALS AND METHODS: On August 22, 2022, a computerized database search was performed to detect papers published in the scientific literature about TADs from 2012 to 2022. Metrics data were identified using the Incites Journal Citation Reports (Clarivate Analytics) data set. The Scopus database was used to obtain information on the authors' affiliations, country of origin, and h-index. Key words were automatically harvested from the selected articles to implement the visualized analysis. RESULTS: From a total of 1858 papers screened by searching the database, a list of the top 50 most cited articles was created. The total number of citations collected by the 50 most cited articles in TADs was 2380. Among the 50 most cited articles on TADs, 38 were original research papers (76.0%) and 12 were reviews (24.0%). As shown by the key word-network analysis, Orthodontic anchorage procedure was identified as the larger node. CONCLUSIONS: Findings of this bibliometric study showed an increasing number of citations for papers on TADs, accompanied by a simultaneous rise in scientific interest in this topic in the past decade. The present work identifies the most influential articles, emphasizing the journals, the authors, and the topics addressed.
Subject(s)
Orthodontic Anchorage Procedures , Orthodontics , Bibliometrics , PublicationsABSTRACT
BACKGROUND: Wearing protective face masks has been one of the indispensable measures to prevent droplets and aerosol particles transmission during the SARS-CoV-2 pandemic. OBJECTIVES: This observational cross-sectional survey investigated the different types and modalities of protective mask wearing and the possible association with referred signs of temporomandibular disorders and orofacial pain by respondents. METHODS: An online questionnaire was developed, calibrated and administered anonymously to subjects with an age of ≥18 years. It consisted of different sections: demographics, type and wearing modalities of the protective masks, pain in the preauricular area, noise at the temporomandibular joints and headache. Statistical analysis was performed using statistical software STATA. RESULTS: The questionnaire received 665 replies mainly from participants aged between 18 and 30 years (315 males and 350 females). The healthcare professionals were 37% of participants, 21.2% of them were dentists. The Filtering Facepiece 2 or 3 (FFP2/FFP3) mask was used by 334 subjects (50.3%), and 578 (87%) wore the mask with two elastics behind the ears. Pain while wearing the mask was referred by 400 participants, and 36.8% of them referred pain with a consecutive use of more than 4 h (p = .042). 92.2% of participants did not report any preauricular noise. Headache associated with the FFP2/FFP3 was referred by 57.7% of subjects (p = .033). CONCLUSION: This survey highlighted the increased referred the presence of discomfort in the preauricular area and headache possibly associated with a prolonged use of protective face masks for more than 4 h during the SARS-CoV-2 pandemic.
Subject(s)
COVID-19 , Temporomandibular Joint Disorders , Male , Female , Humans , Adolescent , Young Adult , Adult , SARS-CoV-2 , COVID-19/prevention & control , COVID-19/epidemiology , Pandemics/prevention & control , Masks , Cross-Sectional Studies , Facial Pain , HeadacheABSTRACT
BACKGROUND: Currently, one of the most discouraging aspects for many patients undergoing dental procedures is the administration of local anaesthesia. Therefore, there is a constant search for new techniques to avoid the invasive and painful nature of the injection. This study aimed to compare the clinical efficacy of local anaesthetics with articaine 4% or mepivacaine 2% (both with epinephrine 1:100.000), using different anaesthetic techniques to perform germectomy of lower third molars and to assess patients' feelings and pain during surgery. METHODS: Totally 50 patients (ranged 11-16 years) who required germectomy of mandibular third molars were recruited. Each patient received local anaesthesia on one side with articaine inoculated with plexus technique while on the other side with mepivacaine using inferior alveolar nerve block technique. The patients' evaluation was performed on pre and intraoperative tactile-pressure feelings and intraoperative pain with four levels on the Visual Analogue Scale (VAS). RESULTS: Surgical operations lasted less with more efficient analgesia when articaine was used. The additional intraosseous injection was required mainly in the mepivacaine group intraoperatively. A few patients had tactile-pressure feelings while intraoperative pain sensation was absent in 90% of cases with articaine. Significant differences were found in the cases who reported "absent" and "moderate" VAS values, favoring the use of articaine. CONCLUSIONS: Articaine injected with a plexus anaesthetic technique seems to be more clinically manageable than mepivacaine for the mandibular third molar germectomy. The discomfort of tactile-pressure feelings and pain experienced was lower using articaine anaesthetic technique used.
Subject(s)
Carticaine , Mepivacaine , Humans , Anesthetics, Local , Molar, Third/surgery , Mouth , PainABSTRACT
OBJECTIVES: To compare the changes of palatal volume and area in patients treated with tooth-tissue-borne palatal expanders (conventional Haas) and miniscrew-supported palatal expanders (modified Haas). MATERIALS AND METHODS: The sample included casts of 22 patients treated as part of a clinical study at the Department of Orthodontics, Al-Azhar University, to correct their crossbite malocclusion. Patients were divided equally into two groups upon arrival. The first group, with a mean age of 12 years and 6 months, received the miniscrew-supported palatal expander. The second group, with a mean age of 12 years and 2 months, received the Haas design-palatal expansion appliance. Pre- and post-expansion dental casts were cone beam computed tomography scanned and the slices were constructed into 3D volumes. Fully automated superimposition was done for pre- and post-expansion 3D models. Palatal volume and area were determined, and all measurements were carried out blindly. Paired t-test was used to assess the mean differences within each group and Welch's t-test was applied to assess the mean changes between the two groups. Shapiro-Wilk test was used to test for the normality of the data. RESULTS: There were no statistical differences in volume changes either within each group or between the groups. Although area changes were statistically significant within each group, the difference between the groups was not significant. CONCLUSIONS: Changes that result from the use of either method to expand the upper arch occur primarily in the shape of the palate, but not in its size.
ABSTRACT
OBJECTIVE: This scoping review aims to describe dental treatment-related patient-reported outcomes (dPROs) while using oral appliances (OAs) to manage obstructive sleep apnea (OSA) in children and adults. METHODS: Available literature that assessed dPROs in children and adults with OSA managed through OAs. Any clinical studies were included without restrictions of year or country. The results were analyzed and reported using narrative text and tables accompanying a descriptive summary. RESULTS: The searches identified 1718 citations, and of these, forty-five studies were finally included. A total of 3498 adults were included in all 42 primary studies included in this review, in which all the studies presented adults as participants. The dPROs assessed were quality of life (QoL), reported side effects after OA usage, patient satisfaction, and experience with treatment, and subjective perception of occlusal changes after treatment. CONCLUSION: This scoping review suggests that dPROs are mostly investigated as a secondary outcome from major studies exploring the effects of OAs on OSA severity, and often, dPROs are not well discussed or displayed on their report. As no risk of bias or certainty level assessment was completed, findings need to be carefully considered. Although in general terms management with OAs among adults with OSA does not seem to be uncomfortable or causing major problems to their lives, some mild discomfort and endured occlusal disturbances was reported in some studies. QoL seems to improve but consistent agreement was elusive. Data does not include experiences among those that dropped OA use. No data seems to exist about dPROs in children.
Subject(s)
Quality of Life , Sleep Apnea, Obstructive , Adult , Child , Humans , Sleep Apnea, Obstructive/therapy , Patient Reported Outcome MeasuresABSTRACT
OBJECTIVES: The study aims to report the perception of dental practices and assess the individual's psychological stress level and related temporomandibular disorders (TMD) symptoms by evaluating the changes that occurred during the year following the first lockdown (May 2020). MATERIALS AND METHODS: An online questionnaire was submitted to the Italian population between 20 March and 20 April 2021. It was sent via online platforms and included 14 questions. STATISTICAL ANALYSIS: The data were analyzed using a chi-squared test and a comparison of the current data with the May 2020 survey data was performed using independent samples t-tests. The level of significance was set at p < 0.05. RESULTS: Forty-three percent of subjects (872) considered the dental practice to be a place with a high risk of infection. Temporomandibular pain and joint sounds were reported by 35.7% (724) of the population; of these more frequently were women (71.8%, 520/724, p < 0.001). About 31% of the participants had moderate/severe psychological distress and, among them, it was found that 46.4% (294/634) reported TMD pain (p < 0.001) and 34.9% (221/634) complained of temporomandibular joint sounds (p < 0.001). CONCLUSIONS: Most participants did not consider dental practices as a place with a higher risk of coronavirus disease 2019 transmission and, in contrast to the data from a previous study, people were less afraid to go to dental practices. After the first year of the pandemic, the level of stress and depression increased and the prevalence of TMD pain and joint sounds increased, in association with gender, age, and level of distress.