A new approach to calibration and determination of selected trace elements in food contact polymers by LA-ICP-MS.

A calibration strategy using porous nylon disks and reference solutions is proposed for the first time for matrix matching and determination of As, Ba, Cd, Cr, Pb, Sr and Zn in polymers by laser ablation-inductively coupled plasma mass spectrometry (LA-ICP-MS). Polymer samples commonly used in contact with food were analyzed. The procedure consists on the use of porous nylon disks as support for a dried droplet reference solution. Calibration in the range of 0.50-190µgg-1 for Ba, Cd, Cr, Pb, Sr and Zn and from 0.30-9.0µgg-1 for As was used. Laser and ICP-MS instrument conditions were evaluated in order to achieve the best signal-to-background ratio. The radiofrequency power and carrier gas flow rate were fixed at 1300W and 1.25Lmin-1, respectively. Spot size, repetition rate, scan line speed and laser fluency were set to 100µm, 20Hz, 100µms-1 and 17.9Jcm-2, respectively, as the established conditions for analysis of standards and samples. By using these conditions, limits of detection, estimated considering B+3s (where B is the value of the blank and s is the standard deviation of 10 measurements of the blank), ranged from 0.09µgg-1 (208Pb) to 1.09 (53Cr) and 0.05µgg-1 (208Pb) to 2.10 (53Cr) for calibration with and without 13C as internal standard (IS). In spite to the use of nylon for matrix matching of different polymeric matrices, the normalization with 13C as IS was also evaluated. The precision of the method is relatively good (RSD<20%), and the accuracy of the method, evaluated by analysis of certified reference materials (CRM) and by comparison with results obtained from solution analysis by ICP-MS after sample decomposition by microwave induced combustion (MIC) is relatively good. The suitability of the proposed method resulted in direct and reliable analyses of polymer samples with a simplified or unnecessary sample preparation step. In addition, the calibration with dried droplet reference solutions may be considered a promising procedure in view of its advantages to other forms of calibration, as the use of CRM or the preparation of synthetic standards. The use of porous nylon disks spiked with reference solutions for calibration is the main advantage of the present work.

Characterization of three main degradation products from novel oral anticoagulant rivaroxaban under stress conditions by UPLC-Q-TOF-MS/MS.

Drugs of long-term use may cause the accumulation of chemical compounds in human body. Therefore, the evaluation and structure characterization of synthesis and degradation impurities is substantial to guarantee drug safety and successful pharmaceutical therapy. The present work evaluated the anticoagulant rivaroxabana (RIV) under stress conditions in order to elucidate the chemical structure of major degradation products (DPs) formed after drug exposition to acid and alkaline hydrolysis, and UVC radiation. Analyses were performed in UPLC coupled to quadrupole time-of-flight MS. ESI was applied in positive mode, and C18 Agilent(®) column (2.1×50 mm, 1.8 µm) used for separation of compounds. RIV molecular íon [M+H](+) (m/z 436.07) was fragmented under 20 kV, best energetic condition to obtain clear and reproducible fragmentation pattern, assisting identification of RIV DPs. With support from UPLC separation and specific detection by MS/MS, three main degradation products (DP-1, DP-2, and DP-3) formed under stress conditions were successfully characterized. Presented study agrees with requirements for analytical assessment of impurities in pharmaceutical formulations, ensuring quality of pharmaceutical substances.

External calibration strategy for trace element quantification in botanical samples by LA-ICP-MS using filter paper.

The use of reference solutions dispersed on filter paper discs is proposed for the first time as an external calibration strategy for matrix matching and determination of As, Cd, Co, Cr, Cu, Mn, Ni, Pb, Sr, V and Zn in plants by laser ablation-inductively coupled plasma mass spectrometry (LA-ICP-MS). The procedure is based on the use of filter paper discs as support for aqueous reference solutions, which are further evaporated, resulting in solid standards with concentrations up to 250 µg g(-1) of each element. The use of filter paper for calibration is proposed as matrix matched standards due to the similarities of this material with botanical samples, regarding to carbon concentration and its distribution through both matrices. These characteristics allowed the use of (13)C as internal standard (IS) during the analysis by LA-ICP-MS. In this way, parameters as analyte signal normalization with (13)C, carrier gas flow rate, laser energy, spot size, and calibration range were monitored. The calibration procedure using solution deposition on filter paper discs resulted in precision improvement when (13)C was used as IS. The method precision was calculated by the analysis of a certified reference material (CRM) of botanical matrix, considering the RSD obtained for 5 line scans and was lower than 20%. Accuracy of LA-ICP-MS determinations were evaluated by analysis of four CRM pellets of botanical composition, as well as by comparison with results obtained by ICP-MS using solution nebulization after microwave assisted digestion. Plant samples of unknown elemental composition were analyzed by the proposed LA method and good agreement were obtained with results of solution analysis. Limits of detection (LOD) established for LA-ICP-MS were obtained by the ablation of 10 lines on the filter paper disc containing 40 µL of 5% HNO3 (v v(-1)) as calibration blank. Values ranged from 0.05 to 0.81  µg g(-1). Overall, the use of filter paper as support for dried aqueous standards showed to be a useful strategy for calibration and plant analysis by LA-ICP-MS.

Imazethapyr and imazapic, bispyribac-sodium and penoxsulam: zooplankton and dissipation in subtropical rice paddy water.

Herbicides are very effective at eliminating weed and are largely used in rice paddy around the world, playing a fundamental role in maximizing yield. Therefore, considering the flooded environment of rice paddies, it is necessary to understand the side effects on non-target species. Field experiment studies were carried out during two rice growing seasons in order to address how the commonly-used herbicides imazethapyr and imazapic, bispyribac-sodium and penoxsulam, used at recommended dosage, affect water quality and the non-target zooplankton community using outdoor rice field microcosm set-up. The shortest (4.9 days) and longest (12.2 days) herbicide half-life mean, estimated of the dissipation rate (k) is shown for imazethapyr and bispyribac-sodium, respectively. Some water quality parameters (pH, conductivity, hardness, BOD5, boron, potassium, magnesium, phosphorus and chlorides) achieved slightly higher values at the herbicide treatment. Zooplankton community usually quickly recovered from the tested herbicide impact. Generally, herbicides led to an increase of cladocera, copepods and nauplius population, while rotifer population decreased, with recovery at the end of the experiment (88 days after herbicide treatment).

Effect of zinc supplementation on E-ADA activity, seric zinc, and cytokines levels of Trypanosoma evansi infected Wistar rats.

The aim of this study was to evaluate the effect of zinc supplementation on the ecto-adenosine deaminase activity (E-ADA), zinc seric levels and cytokines (TNF-α, IL-1, IL-6, and IL -10) on rats experimentally infected by Trypanosoma evansi. Four groups with 10 rats each were used as negative controls (groups A and B), while the animals from the groups C and D were infected intraperitoneally with 0.1 mL of cryopreserved blood containing 1.4 × 10(4) of trypanosomes. Animals of groups B and D received two doses of Zinc (Zn) at 5 mg kg(-1), subcutaneously, on the 2nd and 7th day post-infection (PI). Blood samples were collected on days 5 (n = 5) and 15 PI (n = 5). Zn supplementation was able to increase the rat's longevity and to reduce their parasitemia. It was observed that seric Zn levels were increased on infected animals under Zn supplementation. Animals that were infected and supplemented with Zn showed changes in E-ADA activity and in cytokine levels (P < 0.05). Zn supplementation of healthy animals (Group B), increased the E-ADA activity, as well as reduced the concentration of cytokines. Infected animals from groups C and D showed increased levels of cytokines. Finally, we observed that Zn supplementation led to a modulation on cytokine's level in rats infected by T. evansi, as well as in E-ADA activity.

Efficient H2O2/CH3COOH oxidative desulfurization/denitrification of liquid fuels in sonochemical flow-reactors.

The oxidative desulfurization/denitrification of liquid fuels has been widely investigated as an alternative or complement to common catalytic hydrorefining. In this process, all oxidation reactions occur in the heterogeneous phase (the oil and the polar phase containing the oxidant) and therefore the optimization of mass and heat transfer is of crucial importance to enhancing the oxidation rate. This goal can be achieved by performing the reaction in suitable ultrasound (US) reactors. In fact, flow and loop US reactors stand out above classic batch US reactors thanks to their greater efficiency and flexibility as well as lower energy consumption. This paper describes an efficient sonochemical oxidation with H2O2/CH3COOH at flow rates ranging from 60 to 800 ml/min of both a model compound, dibenzotiophene (DBT), and of a mild hydro-treated diesel feedstock. Four different commercially available US loop reactors (single and multi-probe) were tested, two of which were developed in the authors' laboratory. Full DBT oxidation and efficient diesel feedstock desulfurization/denitrification were observed after the separation of the polar oxidized S/N-containing compounds (S≤5 ppmw, N≤1 ppmw). Our studies confirm that high-throughput US applications benefit greatly from flow-reactors.

Delta-aminolevulinate dehydratase activity in red blood cells of rats infected with Trypanosoma evansi.

The aim of this study was to evaluate the activity of delta-aminolevulinate dehydratase (δ-ALA-D) in red blood cells of rats infected with Trypanosoma evansi and establish its association with haematocrit, serum levels of iron and zinc and lipid peroxidation. Thirty-six male rats (Wistar) were divided into 2 groups with 18 animals each. Group A was non-infected while Group B was intraperitoneally infected, receiving 7·5×106 trypomastigotes per animal. Each group was divided into 3 subgroups of 6 rats and blood was collected during different periods post-infection (p.i.) as follows: day 5 (A1 and B1), day 15 (A2 and B2) and day 30 PI (A3 and B3). Blood samples were collected by cardiac puncture to estimate red blood cell parameters (RBC), δ-ALA-D activity and serum levels of iron, zinc and thiobarbituric acid reactive substances (TBARS). Rats in group B showed a significant (P<0·05) reduction of RBC count, haemoglobin concentration and haematocrit at days 5 and 15 p.i. The activity of δ-ALA-D in blood was significantly (P<0·001) increased at days 15 and 30 p.i. δ-ALA-D activity in blood had a significant (P<0·05) negative correlation with haematocrit (r=-0·61) and haemoglobin (r=-0·70) at day 15 p.i. There was a significant (P<0·05) decrease in serum iron and zinc levels and an increase in TBARS levels (P<0·05) during infection. The δ-ALA-D activity in blood was negatively correlated with the levels of iron (r=-0·68) and zinc (r=-0·57) on day 30 p.i. It was concluded that the increased activity of δ-ALA-D in blood might have occurred in response to the anaemia in remission as heme synthesis was enhanced.

Determination of toxic elements in coal by ICP-MS after digestion using microwave-induced combustion.

A microwave-induced combustion (MIC) procedure was applied for coal digestion for subsequent determination of As, Cd and Pb by inductively coupled plasma mass spectrometry (ICP-MS) and Hg using cold vapor (CV) generation coupled to ICP-MS. Pellets of coal (500 mg) were combusted using 20 bar of oxygen and ammonium nitrate as aid for ignition. The use of nitric acid as absorbing solution (1.7, 3.5, 5.0, 7.0 and 14 mol L(-1)) was evaluated. For coal samples with higher ash content, better results were found using 7.0 mol L(-1) HNO(3) and an additional reflux step of 5 min after combustion step. For coal samples with ash content lower than 8%, 5.0 mol L(-1) nitric acid was suitable to the absorption of all analytes. Accuracy was evaluated using certified reference material (CRM) of coal and spikes. Agreement with certified values and recoveries was better than 95 and 97%, respectively, for all the analytes. For comparison of results, a procedure recommended by the American Society of Testing and Materials (ASTM) was used. Additionally, a conventional microwave-assisted digestion (MAD) in pressurized vessels was also performed. Using ASTM procedure, analyte losses were observed and a relatively long time was necessary for digestion (>6h). By comparison with MAD procedure, higher sample mass can be digested using MIC allowing better limits of detection. Additionally, the use of concentrated acids was not necessary that is an important aspect in order to obtain low blank levels and lower limits of detection, respectively. The residual carbon content in digests obtained by MAD and MIC was about 15% and <1%, respectively, showing the better digestion efficiency of MIC procedure. Using MIC it was possible to digest completely and simultaneously up to eight samples in only 25 min with relatively lower generation of laboratory effluents.

Ultrasound-assisted oxidative process for sulfur removal from petroleum product feedstock.

A procedure using ultrasonic irradiation is proposed for sulfur removal of a petroleum product feedstock. The procedure involves the combination of a peroxyacid and ultrasound-assisted treatment in order to comply with the required sulfur content recommended by the current regulations for fuels. The ultrasound-assisted oxidative desulfurization (UAOD) process was applied to a petroleum product feedstock using dibenzothiophene as a model sulfur compound. The influence of ultrasonic irradiation time, oxidizing reagents amount, kind of solvent for the extraction step and kind of organic acid were investigated. The use of ultrasonic irradiation allowed higher efficiency for sulfur removal in comparison to experiments performed without its application, under the same reactional conditions. Using the optimized conditions for UAOD, the sulfur removal was about 95% after 9min of ultrasonic irradiation (20kHz, 750W, run at 40%), using hydrogen peroxide and acetic acid, followed by extraction with methanol.