Colloidal stabilization of hydrophobic InSe 2D nanosheets in a model environmental aqueous solution and their impact on Shewanella oneidensis MR-1.

Semiconductor InSe 2D nanomaterials have emerged as potential photoresponsive materials for broadly distributed photodetectors and wearable electronics technologies due to their high photoresponsivity and thermal stability. This paper addresses an environmental concern about the fate of InSe 2D nanosheets when disposed and released into the environment after use. Semiconducting materials are potentially reactive and often form environmentally damaging species, for example reactive oxygen and nitrogen species, when degraded. InSe nanosheets are prepared using a semi bottom-up approach which involves a reaction between indium and selenium precursors at elevated temperature in an oxygen-free environment to prevent oxidation. InSe nanosheets are formed as a stable intermediate with micrometer-sized lateral dimensions and a few monolayer thickness. The InSe 2D nanosheets are obtained when the reaction is stopped after 30 minutes by cooling. Keeping the reaction at elevated temperature for a longer period, for example 60 minutes leads to the formation of InSe 3D nanoparticles of about 5 nm in diameter, a thermodynamically more stable form of InSe. The paper focuses on the colloidal stabilization of InSe nanosheets in an aqueous solution that contains epigallocatechin gallate (EGCG), a natural organic matter (NOM) simulant. We show that EGCG coats the surface of the hydrophobic, water-insoluble InSe nanosheets via physisorption. The formed EGCG-coated InSe nanosheets are colloidally stable in aqueous solution. While unmodified semiconducting InSe nanosheets could produce reactive oxygen species (ROS) when illuminated, our study shows low levels of ROS generation by EGCG-coated InSe nanosheets under ambient light, which might be attributed to ROS quenching by EGCG. Growth-based viability (GBV) assays show that the colloidally stable EGCG-coated InSe nanosheets adversely impact the bacterial growth of Shewanella oneidensis MR-1, an environmentally relevant Gram-negative bacterium in aqueous media. The impact on bacterial growth is driven by the EGCG coating of the nanosheets. In addition, live/dead assays show insignificant membrane damage of the Shewanella oneidensis MR-1 cells by InSe nanosheets, suggesting a weak association of EGCG-coated nanosheets with the cells. It is likely that the adverse impact of EGCG-coated nanosheets on bacterial growth is the result of increasing local concentration of EGCG either when adsorbed on the nanosheets when the nanosheets interact with the cells, or when desorbed from the EGCG-coated nanosheets to interact with the bacterial cells.

Nanoparticles and biochar with adsorbed plant growth-promoting rhizobacteria alleviate Fusarium wilt damage on tomato and watermelon.

The addition of biochars and nanoparticles with adsorbed Azotobacter vinelandii and Bacillus megaterium alleviated damage from Fusarium infection in both tomato (Solanum lycopersicum) and watermelon (Citrullus lanatus) plants. Tomato and watermelon plants were grown in greenhouse for 28 and 30 days (respectively) and were treated with either nanoparticles (chitosan-coated mesoporous silica or nanoclay) or varying biochars (biochar produced by pyrolysis, gasification and pyrogasification). Treatments with nanoparticles and biochars were applied in two variants - with or without adsorbed plant-growth promoting bacteria (PGPR). Chitosan-coated mesoporous silica nanoparticles with adsorbed bacteria increased chlorophyll content in infected tomato and watermelon plants (1.12 times and 1.63 times, respectively) to a greater extent than nanoclay with adsorbed bacteria (1.10 times and 1.38 times, respectively). However, the impact on other endpoints (viability of plant cells, phosphorus and nitrogen content, as well antioxidative status) was species-specific. In all cases, plants treated with adsorbed bacteria responded better than plants without bacteria. For example, the content of antioxidative compounds in diseased watermelon plants increased nearly 46% upon addition of Aries biochar and by approximately 52% upon addition of Aries biochar with adsorbed bacteria. The overall effect on disease suppression was due to combination of the antifungal effects of both nanoparticles (and biochars) and plant-growth promoting bacteria. These findings suggest that nanoparticles or biochars with adsorbed PGPR could be viewed as a novel and sustainable solution for management of Fusarium wilt.

Engineered Nanoparticles, Natural Nanoclay and Biochar, as Carriers of Plant-Growth Promoting Bacteria.

The potential of biochar and nanoparticles to serve as effective delivery agents for beneficial bacteria to crops was investigated. Application of nanoparticles and biochar as carriers for beneficial bacteria improved not only the amount of nitrogen-fixing and phosphorus-solubilizing bacteria in soil, but also improved chlorophyll content (1.2-1.3 times), cell viability (1.1-1.5 times), and antioxidative properties (1.1-1.4 times) compared to control plants. Treatments also improved content of phosphorus (P) (1.1-1.6 times) and nitrogen (N) (1.1-1.4 times higher) in both tomato and watermelon plants. However, the effect of biochars and nanoparticles were species-specific. For example, chitosan-coated mesoporous silica nanoparticles with adsorbed bacteria increased the phosphorus content in tomato by 1.2 times compared to a 1.1-fold increase when nanoclay with adsorbed bacteria was applied. In watermelon, the situation was reversed: 1.1-fold increase in the case of chitosan-coated mesoporous silica nanoparticles and 1.2 times in case of nanoclay with adsorbed bacteria. Our findings demonstrate that use of nanoparticles and biochar as carriers for beneficial bacteria significantly improved plant growth and health. These findings are useful for design and synthesis of novel and sustainable biofertilizer formulations.

Effect of (3-aminopropyl)triethoxysilane on dissolution of silica nanoparticles synthesized via reverse micro emulsion.

Silica nanomaterials have been studied based on their potential applications in a variety of fields, including biomedicine and agriculture. A number of different molecules have been condensed onto silica nanoparticles' surfaces to present the surface chemistry needed for a given application. Among those molecules, (3-aminopropyl)triethoxysilane (APS) is one of the most commonly applied silanes used for nanoparticle surface functionalization to achieve charge reversal as well as to enable cargo loading. However, the colloidal stability of APS-functionalized silica nanoparticles has not been thoroughly studied, which can be problematic when the high reactivity of amine groups is considered. In this study, four different types of silica nanoparticles with varied location of added APS have been prepared via a reverse micro emulsion process, and their colloidal stability and dissolution behavior have been investigated. Systematic characterization has been accomplished using transmission electron microscopy (TEM), silicomolybdic acid (SMA) spectrophotometric assay, nitrogen adsorption-desorption surface area measurement, and aerosol ion mobility-mass spectrometry to track the nanoparticles' physical and chemical changes during dissolution. We find that when APS is on the interior of the silica nanoparticle, it facilitates dissolution, but when APS is condensed both on the interior and exterior, only the exterior siloxane bonds experience catalytic hydrolysis, and the interior dissolution is dramatically suppressed. The observation and analyses that silica nanoparticles show different hydrolysis behaviors dependent on the location of the functional group will be important in future design of silica nanoparticles for specific biomedical and agricultural applications.