Hydrogen Adsorption on Type-5 Penta-MgN8 Sheet, Nanotube, and 3D Porous Structure.

Motivated by the recent report on penta-MgN8 sheet [Mater. Today Phys. 2023, 38, 101259] that is the first realization of type-5 pentagonal 2D tessellation with exposed regularly distributed Mg ions, we carried out density functional theory studies on the interactions of H2 molecules with 1D penta-nanotube, 2D penta-sheet, and 3D porous structures based on penta-MgN8. We found that when the penta-MgN8 sheet is assembled to a 3D porous structure or curved to a nanotube, the bandgap increases from 1.18 to 1.35 and 1.88 eV, and the resulting derivatives are stable dynamically. When H2 molecules are introduced, the nanotube behaves best in adsorption, where each Mg ion can adsorb three H2 molecules: two on the outer surface and one on the inner surface. The curved geometry of the nanotube makes the Mg ion on the outer surface more exposed as compared with the situations of the 2D sheet and 3D porous structure, resulting in stronger adsorptions to H2. The gravimetric capacity (volumetric capacity) is 4.25 wt % (63 g/L) and 4.25 wt % (65 g/L) for the studied penta-sheet and penta-nanotube, and the corresponding desorption temperature is 115 and 162 K at 1 atm pressure, respectively, while for the 3D porous structure, the adsorption performance is poor due to the limited space and the less curvature, leading to strong steric hindrance and less exposed configuration for Mg ions. Moreover, the effects of temperature and pressure on adsorption are also discussed.

Design of Three-Dimensional Metallic Biphenylene Networks for Na-Ion Battery Anodes with a Record High Capacity.

Na-ion batteries (NIBs) capture intensive research interest in large-scale energy storage applications because of sodium's abundant resources and low cost. However, the low capacity, poor conductivity, and short cycle life of the commonly used anodes are the main challenges in developing advanced NIBs. Here, stimulated by the recent successful synthesis of biphenylene [Science 2021, 372, 852], we show that these problems can be curbed by assembling armchair biphenylene nanoribbons of different widths into three-dimensional architectures, which lead to homogeneously distributed nanopores with robust structural and mechanical stability. Through density functional theory and molecular dynamics calculations combined with the tight-binding model, we find that the assembled 3D biphenylene structures are metallic and thermally stable up to 2500 K, where the metallicity is further identified to originate from the pz-orbitals (π-bonds) of the sp2 carbon atoms. Especially, the optimal assembled structures HexC28 (HexC46) deliver a gravimetric capacity of 956 (1165) mA h g-1 and a volumetric capacity of 1109 (874) mA h mL-1, which are much higher than those of graphite and hard carbon anodes. Moreover, they also show a suitable average potential, negligible volume change, and low diffusion energy barrier. These findings demonstrate that assembling biphenylene nanoribbons is a promising strategy for designing next-generation NIB anodes.

First-principles investigation of nonmetal doped single-layer BiOBr as a potential photocatalyst with a low recombination rate.

Nonmetal doping is an effective approach to modify the electronic band structure and enhance the photocatalytic performance of bismuth oxyhalides. Using density functional theory, we systematically examine the fundamental properties of single-layer BiOBr doped with boron (B) and phosphorus (P) atoms. The stability of the doped models is investigated based on the formation energies, where the substitutional doping is found to be energetically more stable under O-rich conditions than under Bi-rich ones. The results showed that substitutional doping of P atoms reduced the bandgap of pristine BiOBr to a greater extent than that of boron substitution. The calculation of the effective masses reveals that B doping can render the electrons and holes of pristine BiOBr lighter and heavier, respectively, resulting in a slower recombination rate of photoexcited electron-hole pairs. Based on the results of HOMO-LUMO calculations, the introduction of B atoms tends to increase the number of photocatalytically active sites. The top of the valence band and the conduction band bottom of the B doped BiOBr monolayer match well with the water redox potentials in an acidic environment. The absorption spectra propose that B(P) doping causes a red-shift. Overall, the results predict that nonmetal-doped BiOBr monolayers have a reduced bandgap, a slow recombination rate, more catalytically active sites, enhanced optical absorption edges, and reduced work functions, which will contribute to superior photocatalytic performance.

Two-dimensional silicon bismotide (SiBi) monolayer with a honeycomb-like lattice: first-principles study of tuning the electronic properties.

Using density functional theory, we investigate a novel two-dimensional silicon bismotide (SiBi) that has a layered GaSe-like crystal structure. Ab initio molecular dynamic simulations and phonon dispersion calculations suggest its good thermal and dynamical stability. The SiBi monolayer is a semiconductor with a narrow indirect bandgap of 0.4 eV. Our results show that the indirect bandgap decreases as the number of layers increases, and when the number of layers is more than six layers, direct-to-indirect bandgap switching occurs. The SiBi bilayer is found to be very sensitive to an E-field. The bandgap monotonically decreases in response to uniaxial and biaxial compressive strain, and reaches 0.2 eV at 5%, while at 6%, the semiconductor becomes a metal. For both uniaxial and biaxial tensile strains, the material remains a semiconductor and indirect-to-direct bandgap transition occurs at a strain of 3%. Compared to a SiBi monolayer with a layer thickness of 4.89 Å, the bandgap decreases with either increasing or decreasing layer thickness, and at a thicknesses of 4.59 to 5.01 Å, the semiconductor-to-metal transition happens. In addition, under pressure, the semiconducting character of the SiBi bilayer with a 0.25 eV direct bandgap is preserved. Our results demonstrate that the SiBi nanosheet is a promising candidate for designing high-speed low-dissipation devices.

The electronic, half-metallic, and magnetic properties of Ca1-xCrxS ternary alloys: Insights from the first-principle calculations.

The electronic, structural, and magnetic characteristics of Cr atom substituting Ca atom in rocksalt CaS have been investigated within the formalism of (GGA + PBE) and PBE with Hubbard correction (GGA + U). Our findings point out that the ternary alloys are dynamically stable depending on the obtained results of elastic constants. For structural properties, it is clear that the lattice constants decrease and bulk modulus increases with increasing concentration of chromium impurity. Interestingly, the perceived total magnetic moments increase with the Cr concentration and reaches the maximum for Ca0.25Cr0.75S, which is mainly composed of Cr atoms. Besides, it is found from PBE and PBE + U calculations that the Cr-substituted CaS gives half-metallic ferromagnetism (HMF). Finally, the deduced results of minority-spin bands demonstrate a half-metallic ferromagnetic gap and half-metallic (HM) gap. The predicted results confirmed that Ca1-xCrxS could be considered as a promising candidate material for spintronics applications.

Unraveling the effect of Gd doping on the structural, optical, and magnetic properties of ZnO based diluted magnetic semiconductor nanorods.

The structural, magnetic, and optical properties of the pristine and Gd-doped ZnO nanorods (NRs), prepared by facile thermal decomposition, have been studied using a combination of experimental and density functional theory (DFT) with Hubbard U correction approaches. The XRD patterns demonstrate the single-phase wurtzite structure of the pristine and doped ZnO. The rod-like shape of the nanoparticles has been examined by FESEM and TEM techniques. Elemental compositions of the pure and doped samples were identified by EDX measurement. Due to the Burstein-Moss shift, the optical band gaps of the doped samples have been widened compared to pristine ZnO. The PL spectra show the presence of complex defects. Room temperature magnetic properties have been measured using VSM and revealed the coexistence of paramagnetic and weak ferromagnetic ordering in Gd3+ doped ZnO-NRs. The magnetic moment was increased upon addition of more Gd ions into the ZnO host lattice. The DFT+U calculations confirm that the presence of vacancy-complexes has a significant effect on the structural, electronic, and magnetic properties of a pristine ZnO system.