ABSTRACT
Polymer composites with renewable lignocellulosic fillers, despite their many advantages, are susceptible to biodegradation, which is a major limitation in terms of external applications. The work uses an innovative hybrid propolis-silane modifier in order to simultaneously increase the resistance to fungal attack, as well as to ensure good interfacial adhesion of the filler-polymer matrix. Polypropylene composites with 30% pine wood content were obtained by extrusion and pressing. The samples were exposed to the fungi: white-rot fungus Coriolus versicolor, brown-rot fungus Coniophora puteana, and soft-rot fungus Chaetomium globosum for 8 weeks. Additionally, biological tests of samples that had been previously exposed to UV radiation were carried out, which allowed the determination of the influence of both factors on the surface destruction of composite materials. The X-ray diffraction, attenuated total reflectance-Fourier transform infrared spectroscopy, and mycological studies showed a significant effect of the modification of the lignocellulose filler with propolis on increasing the resistance to fungi. Such composites were characterized by no changes in the supermolecular structure and slight changes in the intensity of the bands characteristic of polysaccharides and lignin. In the case of systems containing pine wood that had not been modified with propolis, significant changes in the crystalline structure of polymer composites were noted, indicating the progress of decay processes. Moreover, the modification of the propolis-silane hybrid system wood resulted in the inhibition of photo- and biodegradation of WPC materials, as evidenced only by a slight deterioration in selected strength parameters. The applied innovative modifying system can therefore act as both an effective and ecological UV stabilizer, as well as an antifungal agent.
ABSTRACT
The article presents characteristics of wood/polypropylene composites, where the wood was treated with propolis extract (EEP) and innovative propolis-silane formulations. Special interest in propolis for wood impregnation is due to its antimicrobial properties. One propolis-silane formulation (EEP-TEOS/VTMOS) consisted of EEP, tetraethyl orthosilicate (TEOS), and vinyltrimethoxysilane (VTMOS), while the other (EEP-TEOS/OTEOS) contained EEP, tetraethyl orthosilicate (TEOS), and octyltriethoxysilane (OTEOS). The treated wood fillers were characterized by Fourier transform infrared spectroscopy (FTIR), atomic absorption spectrometry (AAS), and X-ray diffraction (XRD), while the composites were investigated using differential scanning calorimetry (DSC), X-ray diffraction (XRD), and optical microscopy. The wood treated with EEP and propolis-silane formulations showed resistance against moulds, including Aspergillus niger, Chaetomium globosum, and Trichoderma viride. The chemical analyses confirmed presence of silanes and constituents of propolis in wood structure. In addition, treatment of wood with the propolis-silane formulations produced significant changes in nucleating abilities of wood in the polypropylene matrix, which was confirmed by an increase in crystallization temperature and crystal conversion, as well as a decrease in half-time of crystallization parameters compared to the untreated polymer matrix. In all the composites, the formation of a transcrystalline layer was observed, with the greatest rate recorded for the composite with the filler treated with EEP-TEOS/OTEOS. Moreover, impregnation of wood with propolis-silane formulations resulted in a considerable improvement of strength properties in the produced composites. A dependence was found between changes in the polymorphic structures of the polypropylene matrix and strength properties of composite materials. It needs to be stressed that to date literature sources have not reported on treatment of wood fillers using bifunctional modifiers providing a simultaneous effect of compatibility in the polymer-filler system or any protective effect against fungi.
