Indoor air quality in California homes with code-required mechanical ventilation.

Data were collected in 70 detached houses built in 2011-2017 in compliance with the mechanical ventilation requirements of California's building energy efficiency standards. Each home was monitored for a 1-week period with windows closed and the central mechanical ventilation system operating. Pollutant measurements included time-resolved fine particulate matter (PM2.5 ) indoors and outdoors and formaldehyde and carbon dioxide (CO2 ) indoors. Time-integrated measurements were made for formaldehyde, NO2 , and nitrogen oxides (NOX ) indoors and outdoors. Operation of the cooktop, range hood, and other exhaust fans was continuously recorded during the monitoring period. Onetime diagnostic measurements included mechanical airflows and envelope and duct system air leakage. All homes met or were very close to meeting the ventilation requirements. On average, the dwelling unit ventilation fan moved 50% more airflow than the minimum requirement. Pollutant concentrations were similar to or lower than those reported in a 2006-2007 study of California new homes built in 2002-2005. Mean and median indoor concentrations were lower by 44% and 38% for formaldehyde and 44% and 54% for PM2.5 . Ventilation fans were operating in only 26% of homes when first visited, and the control switches in many homes did not have informative labels as required by building standards.

Potential airborne pathogen transmission in a hospital with and without surge control ventilation system modifications.

To better understand the transport of airborne particulate matter (PM) in hospital environments when surge control strategies are implemented, tests were conducted in a recently decommissioned hospital during a one-week period. An aerosol was released within a patient room and concentrations measured in the room and hallway with and without surge control ventilation system modifications. The average hallway protection efficiencies were high (>98%) both for the baseline ventilation configuration and when the ventilation system was modified for whole floor negative pressure, indicating very little PM reached the hallway. During entry/exit events through the patient room door into the hallway, the average minimum hallway protection efficiencies were lower during the modified ventilation operation (93-94%) than for the baseline operation (98-99%). These lower hallway protection efficiencies may be explained by the 52% reduction in the outdoor air ventilation being supplied to the hallway during the modified operation mode. This suggests that patient room doors should remain closed to control PM movement into the hallway. In addition, if there is concern about airborne infection transmission, an anteroom may be used to further reduce the transport of particles from the patient rooms to the hallways of the ward.

Engineering case report. Toluene and methyl ethyl ketone exposure from a commercially available contact adhesive.

A maintenance worker became ill after working indoors over the course of 3 days with a commercially available contact adhesive containing toluene and methyl ethyl ketone. Respiratory protection or local exhaust ventilation was not used. The worker subsequently suffered from numerous medical symptoms including tremors and elevated blood pressure. Magnetic resonance imaging documented the occurrence of encephalopathy. The worker has alleged that the cause of these effects was exposure to the vapors from the contact adhesive. The objective of this study was to characterize/estimate the level of the worker's exposure by obtaining air samples in an exposure chamber while performing similar activities under similar conditions. We found that the worker may have been exposed to approximately 159 ppm toluene and 58 ppm methyl ethyl ketone 8-hr time-weighted averages for 8 hr of adhesive application. The maximum 15-min average exposures were 233 ppm toluene and 85 ppm methyl ethyl ketone.