Virtual reality modulates the control of upper limb motion in one-handed ball catching.

There remains a question about whether and to what extent perception-action coupled response in virtual reality are equal/unequal to those in the real world or physical reality. The purpose of this study was to identify the differences in the environmental effect of virtual presentation on the motor responses of a one-handed ball catching. Thirteen healthy participants were instructed to catch an approaching ball projected at three speeds in a real laboratory room and in a room-sized virtual reality system (CAVE) that simulated those real situations with two- or three-dimensional display settings. The results showed that the arm movement time, which denotes the duration of arm-raising motion (shoulder flexion), was significantly longer in the virtual reality than that in the physical reality at the fast ball speed condition. The shoulder flexion velocities, calculated as the average angular velocity of shoulder flexion over the arm movement time, were significantly lower in the virtual reality than in the physical reality at the medium and fast ball speed conditions. The electromyography onsets, derived from anterior deltoid, biceps brachii, and flexor carpi radialis muscles of the catching arm, appeared before and significantly closer to the initiation of arm raising in the two-dimensional virtual reality than both in the physical reality and in the three-dimensional virtual reality. The findings suggest that simulation of virtual reality may induce a modulation in the motor responses of the catching arm, which is different from natural motion that appeared in the real world. On the contrary, the effect of ball speed generally found in real setting was maintained in the current CAVE experiment.

Intermetallic Charge Transfer in V-Substituted PbCrO3.

PbCrO3 features an unusual charge distribution Pb0.52+Pb0.54+Cr3+O3 with Pb charge disproportionation at ambient pressure. A charge transfer between Pb and Cr is induced by the application of pressure resulting in Pb2+Cr4+O3 charge distribution and a large volume collapse. Here, structural and charge distribution changes in PbCr1-xVxO3 are investigated. Despite a cubic crystal structure in 0 ≤ x ≤ 0.60, discontinuous reduction in the unit cell volume was observed between x = 0.35 and 0.40. Hard X-ray photoemission spectroscopy confirmed the change in Pb charge state from the coexisting Pb2+ and Pb4+ at x = 0.35 to single Pb2+ at x = 0.40. This indicates that V substitution stabilizes the high pressure cubic Pb2+Cr4+O3-type phase. With further increase in the V substitution, the PbVO3-type polar tetragonal phase appeared at x = 0.80.

High-Brightness Red-Emitting Phosphor La3(Si,Al)6(O,N)11:Ce3+ for Next-Generation Solid-State Light Sources.

A novel high-brightness red-emitting phosphor, La3(Si,Al)6(O,N)11:Ce3+ (LSA), which can potentially be used as a laser-excited light source, is demonstrated. Laser-excited phosphor system has great potential for use as a white-light source, as it is orders of magnitude brighter than white LEDs. Although conventional yellow-green phosphors show excellent luminescent properties even under high-power laser excitation, red-emitting phosphors, which are essential to achieve a high color-rendering index and low color-temperature, show quantum efficiency quenching. This limits the output power in multiphosphor excitation systems. Ce3+ should successfully tolerate high-power excitation due to the shortest emission lifetime seen in rare-earth ions, caused by the 5d1-4f1 spin-allowed transition; however, a red-emitting Ce3+-doped phosphor of practical use has not been realized. LSA is described by the crystal-field modification of a yellow-emitting phosphor, La3Si6N11:Ce3+, with substitution of Al in Si sites. LSA shows 640 nm red emission together with tolerance for high-power excitation and thermal quenching, suggesting its significant potential for industrial applications that require ultrahigh brightness.

Quantitative Analysis of Taste Bud Cell Numbers in the Circumvallate and Foliate Taste Buds of Mice.

A mouse single taste bud contains 10-100 taste bud cells (TBCs) in which the elongated TBCs are classified into 3 cell types (types I-III) equipped with different taste receptors. Accordingly, differences in the cell numbers and ratios of respective cell types per taste bud may affect taste-nerve responsiveness. Here, we examined the numbers of each immunoreactive cell for the type II (sweet, bitter, or umami receptor cells) and type III (sour and/or salt receptor cells) markers per taste bud in the circumvallate and foliate papillae and compared these numerical features of TBCs per taste bud to those in fungiform papilla and soft palate, which we previously reported. In circumvallate and foliate taste buds, the numbers of TBCs and immunoreactive cells per taste bud increased as a linear function of the maximal cross-sectional taste bud area. Type II cells made up approximately 25% of TBCs irrespective of the regions from which the TBCs arose. In contrast, type III cells in circumvallate and foliate taste buds made up approximately 11% of TBCs, which represented almost 2 times higher than what was observed in the fungiform and soft palate taste buds. The densities (number of immunoreactive cells per taste bud divided by the maximal cross-sectional area of the taste bud) of types II and III cells per taste bud are significantly higher in the circumvallate papillae than in the other regions. The effects of these region-dependent differences on the taste response of the taste bud are discussed.

Enhanced Negative Thermal Expansion Induced by Simultaneous Charge Transfer and Polar-Nonpolar Transitions.

Negative thermal expansion (NTE) induced by simultaneous mechanisms, that is, charge transfer and polar-nonpolar transitions, was observed for the first time in BiNi1-xFexO3 (0.25 ≤ x ≤ 0.5). The low-temperature phase was found to have a polar structure (space group of R3c) with a Bi3+0.5(1+x)Bi5+0.5(1-x)Ni2+1-xFe3+xO3 charge distribution and short-range ordering of Bi3+ and Bi5+. The volume reduction upon heating that was induced by charge transfer between Bi5+ and Ni2+ decreased with increasing x because of the reduction in the amount of Ni2+. Simultaneous polar-nonpolar transition also contributed to NTE, and a composition-independent enhanced volume reduction of ∼2% was observed.

Stability of Polar Structure in Filling-Controlled Giant Tetragonal Perovskite Oxide PbVO3.

The crystal structure and stability of a giant tetragonal phase in electron-doped Pb1- xBi xVO3 ( x = 0.1, 0.2, and 0.3) and hole-doped Pb1- xNa xVO3 ( x = 0.1, 0.2, and 0.3) were studied. Electron doping effectively destabilized the tetragonal structure. The c/ a ratio, spontaneous polarization, and tetragonal-to-cubic phase transition pressure systematically decreased with increasing Bi3+ substitution. In contrast, hole doping hardly affected the tetragonal distortion and structural stability. We showed that electron doping is an effective way to control the stability of the tetragonal phase of PbVO3 with a 3d1 electronic configuration.

Large Negative Thermal Expansion Induced by Synergistic Effects of Ferroelectrostriction and Spin Crossover in PbTiO3-Based Perovskites.

The discovery of unusual negative thermal expansion (NTE) provides the opportunity to control the common but much desired property of thermal expansion, which is valuable not only in scientific interests but also in practical applications. However, most of the available NTE materials are limited to a narrow temperature range, and the NTE effect is generally weakened by various modifications. Here, we report an enhanced NTE effect that occurs over a wide temperature range α‾V=-5.24×10-5∘C-1,25-575∘C, and this NTE effect is accompanied by an abnormal enhanced tetragonality, a large spontaneous polarization, and a G-type antiferromagnetic ordering in the present perovskite-type ferroelectric of (1-x)PbTiO3-xBiCoO3. Specifically, for the composition of 0.5PbTiO3-0.5BiCoO3, an extensive volumetric contraction of ~4.8 % has been observed near the Curie temperature of 700 °C, which represents the highest level in PbTiO3-based ferroelectrics. According to our experimental and theoretical results, the large NTE originates from a synergistic effect of the ferroelectrostriction and spin crossover of cobalt on the crystal lattice. The actual NTE mechanism is contrasted with previous functional NTE materials, in which the NTE is simply coupled with one ordering such as electronic, magnetic, or ferroelectric ordering. The present study sheds light on the understanding of NTE mechanisms, and it attests that NTE could be simultaneously coupled with different orderings, which will pave a new way toward the design of large NTE materials.

Can Slow-Motion Footage of Forehand Strokes Be Used to Immediately Improve Anticipatory Judgments in Tennis?

Slow-motion footage of sports actions is widely used as a visual learning tool in observing the dynamic motor behaviors of athletes. Recent studies on action observation have reported that extending the observation time in slow-motion footage provides benefits of understanding the intention of an opponent's action, at least when observing rapid movements. As such, the use of slow-motion footage may have the potential to improve the anticipatory judgments of an opponent's action outcome without training (or feedback). To verify this possibility, we examined the effects of the replay speed of slow-motion footage on the anticipatory judgments of shot directions and recognition of kinematic positions of opponents' forehand strokes in tennis. Nine skilled and nine novice tennis players were asked to anticipate the direction of their opponent's shots (left or right) and then attempted to recognize proximal (trunk center) and distal (ball) kinematic positions. Computer graphic animations of forehand strokes were used as visual stimuli, which were presented at four different replay speeds (normal, three-quarter, half, and quarter speeds). We failed to show the immediate effect of the use of slow-motion footage on the anticipatory performance of the skilled and novice players, although the anticipatory performance of the skilled players was superior to that of the novice players. Instead, we found an effect of the use of slow-motion footage in terms of promoting recognition of important kinematic cues (trunk center) for effective anticipation by skilled players. Moreover, no significant correlations were observed between the anticipatory judgments and motion recognition in all experimental conditions. These results suggest that even if the use of slow-motion footage enhances the recognition of key kinematic cues, it may not immediately improve anticipatory judgments in tennis.

Colossal Volume Contraction in Strong Polar Perovskites of Pb(Ti,V)O3.

The unique physical property of negative thermal expansion (NTE) is not only interesting for scientific research but also important for practical applications. Chemical modification generally tends to weaken NTE. It remains a challenge to obtain enhanced NTE from currently available materials. Herein, we successfully achieve enhanced NTE in Pb(Ti1-xVx)O3 by improving its ferroelectricity. With the chemical substitution of vanadium, lattice tetragonality (c/a) is highly promoted, which is attributed to strong spontaneous polarization, evidenced by the enhanced covalent interaction in the V/Ti-O and Pb-O2 bonds from first-principles calculations. As a consequence, Pb(Ti0.9V0.1)O3 exhibits a nonlinear and much stronger NTE over a wide temperature range with a volumetric coefficient of thermal expansion αV = -3.76 × 10-5/°C (25-550 °C). Interestingly, an intrinsic giant volume contraction (∼3.7%) was obtained at the composition of Pb(Ti0.7V0.3)O3 during the ferroelectric-to-paraelectric phase transition, which represents the highest value ever reported. Such volume contraction is well correlated to the effect of spontaneous volume ferroelectrostriction. The present study extends the scope of the NTE family and provides an effective approach to explore new materials with large NTE, such as through adjusting the NTE-related ferroelectric property in the family of ferroelectrics.

The role of proximal body information on anticipatory judgment in tennis using graphical information richness.

OBJECTIVE: Recent studies have reported that skilled tennis players are likely to use proximal body information for anticipating the direction of their opponent's forehand shot. However, in these studies, the visual stimuli did not include visual information about the ball. Skilled players may have used proximal information owing to the lack of distal information. To address this issue, we developed a novel methodological approach using computer graphics (CG) images in which the entire body was presented by a combination of point-light display (i.e., poor graphical information, PLD) and polygons (i.e., rich graphical information). Using our novel methodological approach, we examined whether skilled tennis players use proximal body information when anticipating shot directions. METHODS AND RESULTS: Fifteen skilled tennis players and fifteen novice players tried to anticipate shot directions by observing four CG forehand strokes (ALPOL: all body parts were represented with polygon; RAPLD: racket and arm were represented with PLD; BOPLD: body parts without racket and arm were represented with PLD; and ALPLD: all body parts were represented with PLD). Our intention in creating CG models with such combinations (i.e., RAPLD and BOPLD) was that because of the richer graphical information provided by polygons compared to PLD, the participant's anticipatory judgment would be influenced more by body parts expressed with polygons. The results showed that for skilled players, anticipatory judgment was more accurate when they observed RAPLD than when they observed BOPLD and ALPLD. In contrast, for novice players, there were no differences in the accuracy of anticipatory judgments with the four CG models. CONCLUSIONS: Only skilled players made more accurate anticipatory judgments when body regions were expressed with rich graphical information, and the racket and arm were expressed with poor graphical information. These suggest that skilled players used proximal information to effectively anticipate shot directions.

Growth inhibition and differentiation of cultured smooth muscle cells depend on cellular crossbridges across the tubular lumen of type I collagen matrix honeycombs.

Although rabbit vascular smooth muscle cells (SMCs) showed a differentiated phenotype in three-dimensional type I collagen matrices (honeycombs, diameter of pores=200-500 microm), mouse vascular SMCs proliferated in honeycombs having the same pore size. Here we investigated the relationship between pore sizes of honeycombs and differentiation of SMCs using various pore sizes of honeycombs. Rabbit SMCs (length: 200+/-32 microm) and mouse SMCs (49+/-10 microm) formed crossbridges in honeycombs with 200-300 microm and less than 200 microm of pores, respectively. Both SMCs spread on the inner wall but did not form crossbridges in honeycombs with larger pores. [(3)H]Thymidine incorporation and cell number of both SMCs were decreased when the crossbridges were formed in honeycombs. Because proliferation inhibition and crossbridge formation were observed in the culture of rabbit and mouse SMCs using 200-300 microm and less than 200 microm pore sized honeycombs, respectively, these data suggested that forming crossbridges was important for the inhibition of proliferation of SMCs. Rabbit SMCs differentiation was accompanied by the expression of caldesmon heavy chain when cultured in honeycombs having less than 300 microm pores. Proliferation of mouse SMCs stopped in honeycombs having less than 200 microm pores, but caldesmon heavy chain was not detected despite the expression of its mRNA. Proliferation of SMCs stopped on plates when cells reached confluent state, however, caldesmon heavy chain was not expressed. These data suggested that an appropriate structure and suitable honeycomb pore size are important for the differentiation of SMCs.