Three dimensional excitation-emission matrix fluorescence spectroscopy of typical Japanese soil powders.

Front face fluorescence spectroscopy of typical Japanese soil powders (soil A: Typic Hapludand; soil H: Typic Hydraquent; soil Y: Typic Paleudult) has been conducted. Three dimensional excitation-emission matrix fluorescence spectra of the 100 wt% soils showed similar fluorescence patterns to each other. The fluorescence patterns were similar between the soil samples and their residues after extraction by NaOH solution for 60 min. In order to examine fluorescence extinction from a view point of whiteness of the soils, the soil powders were mixed with white and black diluents (Al2O3 and Fe3O4) and fluorescence spectra of the mixtures were measured at 450 nm excitation. At low levels of dilution with Al2O3 (2-100 wt% of A; 50-100 wt% of H and Y), the fluorescence intensities increased with dilution. At high levels of dilution with Al2O3, the fluorescence intensities decreased with dilution. On the other hand, fluorescent intensities decreased by dilution with Fe3O4. These results suggested inner filter effect-like fluorescence extinction by (1) large amount of blackish organic compounds giving high total carbon value and (2) blackish non-fluorescent mineral compounds. In order to correct the fluorescence intensities of the mixtures containing the sample soils and the diluents, we preliminary applied a correction method based on the Kubelka-Munk theory using diffuse reflectance. The corrected fluorescence intensities of samples with white diluents (Al2O3) were described by a simple fluorescence response model having saturation values.

Unexpected Aldehyde Generation in the Exhaust Gas at Waste Incineration Facilities.

Acid gases generated during the thermal treatment of waste are neutralized using devices, such as bag filters coated with slaked lime. However, residual trace organic substances can react with the highly reactive slaked lime. This study investigates the dynamics of organic substances generated in the bag filter when slaked lime is used in the exhaust gas treatment process. The mechanism of aldehyde generation was clarified using head space gas chromatography mass spectrometer (HS-GC/MS). Results indicated that methanol was converted to formaldehyde at a conversion ratio of 0.097% and ethanol was converted to acetaldehyde at a conversion ratio of 0.260%. In addition, when amines used as emulsifiers during slaked lime production persisted in the matrix, acetaldehyde formed at a maximum concentration of 121 mg/m3. The simulation method developed in this study can be used for the initial evaluation of aldehydes unexpectedly produced in an incineration treatment facility.

Determination of hexavalent chromium concentration in industrial waste incinerator stack gas by using a modified ion chromatography with post-column derivatization method.

An ion chromatography with post-column derivatization with 1,5-diphenylcarbazide (IC-DPC) analytical method was modified to enable measurement of trace-level hexavalent chromium (Cr(VI)) in air. One of the difficulties in determining trace levels of Cr(VI) in air with conventional IC-DPC methods is co-elution of the solvent and ion peaks due to high concentrations of ionic compounds in the extract. However, by using gradient elution rather than isocratic elution we were able to fully resolve the Cr(VI) ion peak from the solvent peak without the need for diluting the extract, which would have reduced the minimum quantifiable level of the method. With this method, we were able to detect Cr(VI) in air at concentrations of 5.3ng/m3 (assuming a sampling volume of 1m3 and a final solution volume of 10mL). Recovery tests at three different concentrations of Cr(VI) (50, 250, 1000ng) were performed with or without fly ash; recovery rates at all the concentrations of Cr(VI), with or without fly ash, ranged from 68% to 110% (mean±relative standard deviation, 96%±11%), and there were no differences in recovery rates with respect to the presence or absence of fly ash. Finally, we used the developed method to determine the concentration of Cr(VI) in stack gases collected from eight industrial waste incinerators located in Japan. The concentration of Cr(VI) in the stack gases ranged from below the method quantification limit to 3100ng/m3. The highest concentrations of Cr(VI) detected in the stack gases were two to three orders of magnitude higher than that in ambient air in Japan.

Quantitative Evaluation of Peptide-Material Interactions by a Force Mapping Method: Guidelines for Surface Modification.

Peptide coatings on material surfaces have demonstrated wide application across materials science and biotechnology, facilitating the development of nanobio interfaces through surface modification. A guiding motivation in the field is to engineer peptides with a high and selective binding affinity to target materials. Herein, we introduce a quantitative force mapping method in order to evaluate the binding affinity of peptides to various hydrophilic oxide materials by atomic force microscopy (AFM). Statistical analysis of adhesion forces and probabilities obtained on substrates with a materials contrast enabled us to simultaneously compare the peptide binding affinity to different materials. On the basis of the experimental results and corresponding theoretical analysis, we discuss the role of various interfacial forces in modulating the strength of peptide attachment to hydrophilic oxide solid supports as well as to gold. The results emphasize the precision and robustness of our approach to evaluating the adhesion strength of peptides to solid supports, thereby offering guidelines to improve the design and fabrication of peptide-coated materials.

Battery collection in municipal waste management in Japan: challenges for hazardous substance control and safety.

To clarify current collection rules of waste batteries in municipal waste management in Japan and to examine future challenges for hazardous substance control and safety, we reviewed collection rules of waste batteries in the Tokyo Metropolitan Area. We also conducted a field survey of waste batteries collected at various battery and small waste electric and electronic equipment (WEEE) collection sites in Tokyo. The different types of batteries are not collected in a uniform way in the Tokyo area, so consumers need to pay attention to the specific collection rules for each type of battery in each municipality. In areas where small WEEE recycling schemes are being operated after the enforcement of the Act on Promotion of Recycling of Small Waste Electrical and Electronic Equipment in Japan in 2013, consumers may be confused about the need for separating batteries from small WEEE (especially mobile phones). Our field survey of collected waste batteries indicated that 6-10% of zinc carbon and alkaline batteries discarded in Japan currently could be regarded as containing mercury. More than 26% of zinc carbon dry batteries currently being discarded may have a lead content above the labelling threshold of the EU Batteries Directive (2006/66/EC). In terms of safety, despite announcements by producers and municipalities about using insulation (tape) on waste batteries to prevent fires, only 2.0% of discarded cylindrical dry batteries were insulated. Our field study of small WEEE showed that batteries made up an average of 4.6% of the total collected small WEEE on a weight basis. Exchangeable batteries were used in almost all of mobile phones, digital cameras, radios, and remote controls, but the removal rate was as low as 22% for mobile phones. Given the safety issues and the rapid changes occurring with mobile phones or other types of small WEEE, discussion is needed among stakeholders to determine how to safely collect and recycle WEEE and waste batteries.

Regional and longitudinal estimation of product lifespan distribution: a case study for automobiles and a simplified estimation method.

Product lifespan estimates are important information for understanding progress toward sustainable consumption and estimating the stocks and end-of-life flows of products. Publications reported actual lifespan of products; however, quantitative data are still limited for many countries and years. This study presents regional and longitudinal estimation of lifespan distribution of consumer durables, taking passenger cars as an example, and proposes a simplified method for estimating product lifespan distribution. We estimated lifespan distribution parameters for 17 countries based on the age profile of in-use cars. Sensitivity analysis demonstrated that the shape parameter of the lifespan distribution can be replaced by a constant value for all the countries and years. This enabled a simplified estimation that does not require detailed data on the age profile. Applying the simplified method, we estimated the trend in average lifespans of passenger cars from 2000 to 2009 for 20 countries. Average lifespan differed greatly between countries (9-23 years) and was increasing in many countries. This suggests consumer behavior differs greatly among countries and has changed over time, even in developed countries. The results suggest that inappropriate assumptions of average lifespan may cause significant inaccuracy in estimating the stocks and end-of-life flows of products.

Toxic metals in WEEE: characterization and substance flow analysis in waste treatment processes.

Waste electrical and electronic equipment (WEEE) has received extensive attention as a secondary source of metals. Because WEEE also contains toxic substances such as heavy metals, appropriate management of these substances is important in the recycling and treatment of WEEE. As a basis for discussion toward better management of WEEE, this study characterizes various types of WEEE in terms of toxic metal contents. The fate of various metals contained in WEEE, including toxic metals, was also investigated in actual waste treatment processes. Cathode-ray tube televisions showed the highest concentration and the largest total amount of toxic metals such as Ba, Pb, and Sb, so appropriate recycling and disposal of these televisions would greatly contribute to better management of toxic metals in WEEE. A future challenge is the management of toxic metals in mid-sized items such as audio/visual and ICT equipment because even though the concentrations were not high in these items, the total amount of toxic metals contained in them is not negligible. In the case of Japan, such mid-sized WEEE items as well as small electronic items are subject to municipal solid waste treatment. A case study showed that a landfill was the main destination of toxic metals contained in those items in the current treatment systems. The case study also showed that changes in the flows of toxic metals will occur when treatment processes are modified to emphasize resource recovery. Because the flow changes might lead to an increase in the amount of toxic metals released to the environment, the flows of toxic metals and the materials targeted for resource recovery should be considered simultaneously.

Estimating the amount of WEEE generated in South Korea by using the population balance model.

We estimated the amount of waste electrical and electronic equipment (WEEE) generated in South Korea by using the population balance model (PBM) based on a lifespan distribution analysis. This is the first study to apply PBM to estimate WEEE generation in South Korea. The lifespan distribution analysis of electrical and electronic equipment (EEE) was based on the results of a questionnaire survey of 1000 households, which were analyzed with the Weibull distribution. As a result, we could estimate the domestic service lifespan and lifespan distribution shape parameter for eight selected products. Using the lifespan distribution analysis and other data, such as the shipment volume and the number of products owned by households, we estimated the amount of WEEE generated for the eight selected items from 2000 to 2020. We found that 1.2 million air conditioners, 2.5 million televisions, 1.3 million microwave ovens, 1.2 million kimchi refrigerators, 17.0 million mobile phones, 1.7 million refrigerators, 2.0 million vacuum cleaners, and 1.4 million washing machines were generated as WEEE in 2010. We also compared our WEEE estimates with the number of items collected through the official WEEE recycling program from 2003 to 2009 and found that in 2009 washing machines had the highest collection rate (28%) and air conditioners had the lowest rate (7%).

High-resolution inventory of Japanese anthropogenic mercury emissions.

Heavy metals like mercury that are emitted into the environment remain there indefinitely, posing a long-term threat to both the environment and human health. Elemental mercury is volatile and is in gaseous form, and because of the long residence time, transported over long distances. Comprehensive control of mercury emissions therefore remains an important international issue. The crucial steps for designing effective approaches for such control include the quantification of mercury emissions by sources and the identification of geographical characteristics of the emissions. In this study a detailed, high-resolution inventory of Japanese mercury emissions in 2005 was developed to improve understanding of their geographical distribution. Proceeding from a national emissions inventory per source category, emissions were spatially allocated with increasing geographical resolution in a stepwise procedure using statistics from geographic information resources, yielding mercury emissions per prefecture, per municipality and per grid cell of approximately 1 × 1 km. The five prefectures with the highest emissions were Fukuoka, Yamaguchi, Hyogo, Oita, and Hokkaido, accounting for 35.2% of all emissions. In each prefecture a small number of municipalities account for a major share of emissions. Distribution by grid cell is characterized by a concentration of 50% of all emissions in a mere 32 of the 255 954 grid cells over which emissions are distributed in this study. It was also quantitatively confirmed that use of larger grid cells leads to greater uncertainty in emissions distribution. Problems with data collection are clarified and measures to improve the accuracy of future estimation are proposed.

Fate of metals contained in waste electrical and electronic equipment in a municipal waste treatment process.

In Japan, waste electrical and electronic equipment (WEEE) that is not covered by the recycling laws are treated as municipal solid waste. A part of common metals are recovered during the treatment; however, other metals are rarely recovered and their destinations are not clear. This study investigated the distribution ratios and substance flows of 55 metals contained in WEEE during municipal waste treatment using shredding and separation techniques at a Japanese municipal waste treatment plant. The results revealed that more than half of Cu and most of Al contained in WEEE end up in landfills or dissipate under the current municipal waste treatment system. Among the other metals contained in WEEE, at least 70% of the mass was distributed to the small-grain fraction through the shredding and separation and is to be landfilled. Most kinds of metals were concentrated several fold in the small-grain fraction through the process and therefore the small-grain fraction may be a next target for recovery of metals in terms of both metal content and amount. Separate collection and pre-sorting of small digital products can work as effective way for reducing precious metals and less common metals to be landfilled to some extent; however, much of the total masses of those metals would still end up in landfills and it is also important to consider how to recover and utilize metals contained in other WEEE such as audio/video equipment.

A preliminary categorization of end-of-life electrical and electronic equipment as secondary metal resources.

End-of-life electrical and electronic equipment (EEE) has recently received attention as a secondary source of metals. This study examined characteristics of end-of-life EEE as secondary metal resources to consider efficient collection and metal recovery systems according to the specific metals and types of EEE. We constructed an analogy between natural resource development and metal recovery from end-of-life EEE and found that metal content and total annual amount of metal contained in each type of end-of-life EEE should be considered in secondary resource development, as well as the collectability of the end-of-life products. We then categorized 21 EEE types into five groups and discussed their potential as secondary metal resources. Refrigerators, washing machines, air conditioners, and CRT TVs were evaluated as the most important sources of common metals, and personal computers, mobile phones, and video games were evaluated as the most important sources of precious metals. Several types of small digital equipment were also identified as important sources of precious metals; however, mid-size information and communication technology (ICT) equipment (e.g., printers and fax machines) and audio/video equipment were shown to be more important as a source of a variety of less common metals. The physical collectability of each type of EEE was roughly characterized by unit size and number of end-of-life products generated annually. Current collection systems in Japan were examined and potentially appropriate collection methods were suggested for equipment types that currently have no specific collection systems in Japan, particularly for video games, notebook computers, and mid-size ICT and audio/video equipment.

Improvement in the prognosis of Japanese breast cancer patients from 1946 to 2001--an institutional review.

BACKGROUND: Breast cancer has emerged as one of the most frequent malignancies among Japanese women; however, the long-term survival of Japanese breast cancer patients is uncertain. METHODS: We analyzed the chronological changes in the clinical and pathological characteristics, treatment procedures and the long-term prognosis of 15 416 Japanese women with 16 217 primary breast cancers treated in the Cancer Institute Hospital in Tokyo between 1946 and 2001. RESULTS: Our analysis revealed a chronological increase in the mean patient age, postmenopausal patients and non-invasive carcinomas. Operative procedures became less extensive, with approximately 45% of breast cancer patients in 2000-2001 receiving breast-conserving treatment. Radiotherapy to the regional lymph nodes decreased, while postoperative chemotherapy and hormonal treatments have become more frequent. The survival rate has improved steadily during the past 5 decades. The 10-year crude overall survival rate improved from 61% before 1960 to 83% in the 1990s. CONCLUSIONS: The survival rate of Japanese women with breast cancer has dramatically improved during the past 5 decades.