Proliferation of the Light and Gas Interaction with GaN Nanorods Grown on a V-Grooved Si(111) Substrate for UV Photodetector and NO2 Gas Sensor Applications.

Although excellent milestones of III-nitrides in optoelectronic devices have been achieved, the focus on the optimization of their geometrical structure for multiple applications is very rare. To address this issue, we exclusively designed a prototype device to enhance the photoconversion efficiency and gas interaction capabilities of GaN nanorods (NRs) grown on a V-grooved Si(100) substrate with Si(111) facets for photodetector and gas sensor applications. Photoluminescence studies have demonstrated an increased surface-to-volume ratio and light trapping for GaN NRs grown on V-grooved Si(111). GaN NRs on V-grooved Si(100) with Si(111) facets exhibited high photodetection performance in terms of photoresponsivity (217 mA/cm2), detectivity (3 × 1013 Jones), and external quantum efficiency (2.73 × 105%) compared to GaN NRs grown on plain Si(111). Owing to the robust interconnection between NRs and a high surface-to-volume ratio, the GaN NRs grown on V-grooved Si(100) with Si(111) facets probed for NO2 detection with the assistance of photonic energy. The photo-assisted sensing makes it possible to detect NO2 gas at the ppb level at room temperature, resulting in significant power reduction. The device showed high selectivity to NO2 against other target gases, such as NO, H2S, H2, NH3, and CO. The device showed excellent long-term stability at room temperature; the humidity effect on the device performance was also examined. The excellent device performance was due to the following: (i) benefited from the V-grooved Si structure, GaN NRs significantly trapped the incident light, which promoted high photocurrent conversion efficiency and (ii) GaN NRs grown on V-grooved Si(100) with Si(111) facets increased the surface-to-volume ratio and thus improved the gas interaction with a better diffusion ratio and high light trapping, which resulted in increased response/recovery times. These results represent an important forward step in prototype devices for multiple applications in materials research.

Ag Nanowire-Plasmonic-Assisted Charge Separation in Hybrid Heterojunctions of Ppy-PEDOT:PSS/GaN Nanorods for Enhanced UV Photodetection.

The surface states, poor carrier life, and other native defects in GaN nanorods (NRs) limit their utilization in high-speed and large-gain ultraviolet (UV) photodetection applications. Making a hybrid structure is one of the finest strategies to overcome such impediments. In this work, a polypyrrole (Ppy)-poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)/GaN NRs hybrid structure is introduced for self-powered UV photodetection applications. This hybrid structure yields high photodetection performance, while pristine GaN NRs showed negligible photodetection properties. The ability of the photodetector is further boosted by functionalizing the hybrid structure with Ag nanowires (NWs). The Ag NWs-functionalized hybrid structure exhibited a responsivity of 3.1 × 103 (A/W), detectivity of 3.19 × 1014 Jones, and external quantum efficiency of 1.06 × 106 (%) under a UV illumination of λ = 382 nm. This high photoresponse is due to the huge photon absorption rising from the localized surface plasmonic effect of a Ag NWs network. Also, the Ag NWs significantly improved the rising and falling times, which were noted to be 0.20 and 0.21 s, respectively. The model band diagram was proposed with the assistance of X-ray photoelectron spectroscopy to explore the origin of the superior performance of the Ag NWs-decorated Ppy-PEDOT:PSS/GaN NRs photodetector. The proposed hybrid structure seems to be a promising candidate for the development of high-performance UV photodetectors.

Hydrogen passivation: a proficient strategy to enhance the optical and photoelectrochemical performance of InGaN/GaN single-quantum-well nanorods.

Recently, III-nitride semiconductor nanostructures, especially InGaN/GaN quantum well nanorods (NRs), have been established as a promising material of choice for nanoscale optoelectronics and photoelectrochemical (PEC) water-splitting applications. Due to the large number of surface states, III-nitride NRs suffer from low quantum efficiency. Therefore, control of the surface states is necessary to improve device performance in real-time applications. In this work, we investigated the effect of hydrogen plasma treatment on the optical properties of InGaN/GaN single-quantum-well (SQW) NRs. The low-temperature photoluminescence (PL) studies revealed that yellow and green emissions overlapped and the yellow band is more dominant in the pristine InGaN/GaN SQW NRs. However, the emission corresponding to yellow luminescence was strongly suppressed and the green emission is more intensified in hydrogenated InGaN/GaN SQW NRs. Furthermore, the time-resolved PL spectroscopy studies revealed that the carrier lifetimes of hydrogenated InGaN/GaN SQW NRs are relatively short compared to the pristine InGaN/GaN SQW, indicating the effective reduction of non-radiative centers. From the PEC measurement, the photocurrent density of hydrogenated InGaN/GaN SQW NRs in the H2SO4 solution is found to be 5 mA cm-2 at -0.48 V versus reversible hydrogen electrode, which is 3.5-fold larger than that of pristine ones. These findings shed new light on the significance of surface treatment on the optical properties and thus nanostructured photoelectrodes for PEC applications.

A novel low-temperature resistive NO gas sensor based on InGaN/GaN multi-quantum well-embedded p-i-n GaN nanorods.

In gas sensors, metal oxide semiconductors have been considered as favorable resistive-type toxic gas sensing materials. However, the higher temperature operation of metal oxides becomes a barrier for their wide range of applications in explosive and flammable gas environments. In this regard, great efforts have been devoted to reducing the operating temperature of the sensor. We demonstrated a chemical resistor-type NO gas sensor based on p-i-n GaN nanorods (NRs) consisting of InGaN/GaN multi-quantum wells (MQW). The sensor exhibited superior NO gas sensing performance to p-type GaN NRs. Furthermore, it also showed a remarkably improved response and fast recovery under UV irradiation (λ = 367 nm) of different UV intensities (7 to 20 mw cm-2) under reverse bias. The sensing performance of MQW-embedded p-i-n GaN NRs was enhanced with the boosted response by 4-fold at 35 °C under UV irradiation. The significant decrease in the resistance of the sensor under UV irradiation was mainly due to the extraction of photo-generated carriers under reverse bias, which can enhance the ionization of oxygen molecules. In addition, the effect of relative humidity (30%-60%) on the gas sensing performance was also manifested in this study. The selectivity of the sensor was determined by using other gases (NO, NO2, O2, NH3, H2S, CO, and H2), which exhibited a low response towards all tested gases other than NO. The experimental results demonstrated that p-i-n GaN NRs with InGaN/GaN MQW is a promising material for the detection of NO gas. Specific emphasis was laid on the enhanced response of p-i-n GaN NRs in reverse bias under UV irradiation.

Comparison of the efficiency of various muscle transposition procedures using a novel three-dimensional model.

AIM: To investigate the performance of a newly developed three-dimensional (3D) biomechanical model in various transposition procedures for correction of complete sixth nerve palsy with educational purpose. METHODS: A 3D biomechanical eye model was created using Hyperworks software based on geometry data and the biochemical properties of the eyeball and extraocular muscles. A complete sixth nerve palsy model was achieved via modification of lateral rectus muscle strength. Four different muscle transposition procedures (the Hummelsheim, Jensen, Foster, and muscle union procedures) were set up, and the objective surgical effect of each procedure was calculated using 3D model simulation. RESULTS: In the 3D simulation, sixth nerve palsy was modeled by rotating the eye 34.16 degrees in the medial direction, consistent with 70 prism diopter (PD) esotropia. In surgical model simulation, the Hummelsheim procedure resulted in a 28 PD reduction of total deviation, the Jensen procedure achieved a 34 PD reduction, the Foster procedure led to a 57 PD reduction, the muscle union procedure yielded a 57 PD reduction in esotropia in sixth nerve palsy. CONCLUSION: The 3D simulation provided a consistent model of sixth nerve palsy and objective data excluding the potential for variation of surgical skill. It could also help predict surgical outcomes.

A study of the red-shift of a neutral donor bound exciton in GaN nanorods by hydrogenation.

In this paper we account for the physics behind the exciton peak shift in GaN nanorods (NRs) due to hydrogenation. GaN NRs were selectively grown on a patterned Ti/Si(111) substrate using plasma-assisted molecular beam epitaxy, and the effect of hydrogenation on their optical properties was investigated in detail using low-temperature photoluminescence measurements. Due to hydrogenation, the emissions corresponding to the donor-acceptor pair and yellow luminescence in GaN NRs were strongly suppressed, while the emission corresponding to the neutral to donor bound exciton (D0X) exhibited red-shift. Thermal annealing of hydrogenated GaN NRs demonstrated the recovery of the D0X and deep level emission. To determine the nature of the D0X peak shift due to hydrogenation, comparative studies were carried out on various diameters of GaN NRs, which can be controlled by different growth conditions and wet-etching times. Our experimental results reveal that the D0X shift depends on the diameter of the GaN NRs after hydrogenation. The results clearly demonstrate that the hydrogenation leads to band bending of GaN NRs as compensated by hydrogen ions, which causes a red-shift in the D0X emission.

Muscle Union Procedure in Patients with Paralytic Strabismus.

To present the surgical outcomes of a muscle union procedure in patients with paralytic strabismus, this retrospective study included 27 patients with paralytic strabismus who underwent a muscle union procedure. In this procedure, the two vertical rectus muscles are united with the paralytic horizontal muscle without splitting the muscles. Postoperative ocular deviations, complications, surgical success rates, and reoperation rates were obtained by examining the medical records of the patients. Seventeen patients had a sixth cranial nerve palsy, seven patients had a third cranial nerve palsy, and three patients had a medial rectus muscle palsy after endoscopic sinus surgery. The mean preoperative angle of horizontal deviation in the primary position was 56 ± 21 prism diopters. The mean follow-up period was 12 ± 9 months. The mean final postoperative ocular deviation was 8 ± 13 prism diopters. The success rate was 74%, and the reoperation rate was 0%. No significant complications, including anterior ischemia, occurred in any of the patients. One patient exhibited an increase in intraocular pressure in the immediate postoperative period, but this resolved spontaneously within 1 week. Our muscle union procedure was effective in patients with paralytic strabismus, especially in patients with a large angle of deviation. This muscle union procedure is potentially a suitable option for muscle transposition in patients with paralytic strabismus who have large-angle deviation or a significant residual angle after conventional surgery.

Nanomechanical measurement of astrocyte stiffness correlated with cytoskeletal maturation.

Astrocytes are known to serve as scaffolding cells that shape the brain. The physical properties of astrocytes, such as stiffness, are important for their scaffolding function. These properties may be altered in certain pathological conditions, such as in brain cancer. However, actual stiffness of astrocytes is not yet well understood. Here, we report that the astrocyte stiffness is positively correlated with the density of cytoskeletal proteins, such as actin filaments, microtubules, and intermediate filaments. The value of the stiffness of astrocytes as measured by atomic force microscopy (AFM) increases 38-fold in five-week-old rats compared to postnatal-day zero pups. Using multicolor confocal microscopy, we found that the complexity of cytoskeletal proteins, such as actin filaments, microtubules, and intermediate filaments, increase as the animal gets older. Our findings indicate that the change of stiffness positively correlates with the maturation of cytoskeletal proteins, and suggest that AFM can be useful as an analytical and diagnostic tool for neuroscience.

Effect of topography on the wetting of nanoscale patterns: experimental and modeling studies.

We investigated the influence of nanoscale pattern shapes, contours, and surface chemistry on wetting behavior using a combination of experimental and modeling approaches. Among the investigated topographical shapes, re-entrant geometries showed superior performance owing to their ability to restrain the liquid-air interface in accordance with Gibbs criteria. The wetting state is also controlled by the surface texture in addition to the surface chemistry. Topographies with smaller intrinsic angles are better able to support the liquid droplet. Based on these observations, two geometrical relationships for designing superhydrophobic patterns exhibiting the Cassie-Baxter state are proposed. A detailed analysis of the simulation results showed the presence of viscous forces during the initial transient phase of the droplet interaction with the solid surface even at negligible normal velocity, which was verified experimentally using a high-speed imaging technique. During this transient phase, for a polystyrene surface, the liquid front was observed to be moving with a radial velocity of 0.4 m s(-1), which gradually decreased to almost zero after 35 ms. We observed that the viscous energy dissipation density is influenced by the surface material and topography and the wetting state. The viscous energy dissipation density is minimal in the case of the Cassie-Baxter state, while it becomes quite significant for the Wenzel state. The viscous effects are reduced for topographies with smooth geometries and surfaces with high slip length.

Clinical measurement of the angle of ocular movements in the nine cardinal positions of gaze.

PURPOSE: To measure the maximum angle of ocular versions using photographs of the 9 cardinal positions and a modified limbus test. DESIGN: An evaluation of diagnostic technology; a prospective observational study. PARTICIPANTS: We enrolled 104 healthy subjects, 20 to 40 years of age. METHODS: Photographs were obtained in the 9 cardinal positions of gaze and the images were processed using Photoshop. The images were analyzed using the Image J program to measure the angle of version. The maximum angle of the 9 cardinal positions was quantified using a modified limbus test. MAIN OUTCOME MEASURES: We measured the maximum angle of ocular versions in the 9 cardinal positions of gaze. We also compared the results for males and females. RESULTS: The mean angles of maximum version were adduction 47.4°, abduction 46.4°, elevation 31.8°, depression 47.8°, elevation in adduction 39.7°, elevation in abduction 40.7°, depression in adduction 52.7°, and depression in abduction 49.2°. The mean angle of maximum elevation was significantly smaller than that of depression (P <0.001). There were no correlations between the angle of maximum version and age, spherical equivalents, or axial length. The angle of maximum version for males was significantly greater than that for females, except for inferior gaze. CONCLUSIONS: A modified limbus test using photographs of the 9 cardinal positions is an objective and reproducible tool for quantifying ocular movement. Considering its simplicity, ease of use, and low cost, it has clear applications in clinical practice.

Hydrodynamic effects on bacterial biofilm development in a microfluidic environment.

In aquatic environments, microorganisms tend to form biofilms on surfaces to protect them from harsh conditions. The biofilms then accumulate into multilayered mat-like structures. In this study, we evaluated the effects of the hydrodynamic conditions on the ecology of biofilms produced by Pseudomonas aeruginosa (PA14). In microfluidic channels, we found that the development of biofilms was regulated by hydrodynamic conditions, but the developed biofilms also changed flow velocity by narrowing flow width. The coupled growing conditions were simplified by a new concept of consequent variables, and the dimensionless biofilm development (Ab/h(2) & Ab/w(cs)(2)) was successfully expressed by the Reynolds number (Re) and the dimension of the channel (r). At low Re, higher flow rates encouraged growth of biofilms, while higher flow rates with high Re suppressed growth of biofilms. These results provide a simple model as a theoretical basis for understanding development of biofilms in microfluidic channels.

The growth of a low defect InAs HEMT structure on Si by using an AlGaSb buffer layer containing InSb quantum dots for dislocation termination.

It is found that the surface migration and nucleation behaviors of InSb quantum dots on AlSb/Si substrates, formed by molecular beam epitaxy in Stranski-Krastanov (SK) growth mode, are dependent on the substrate temperature. At relatively high temperatures above 430 degrees C, quantum dots are migrated and preferentially assembled onto the surface steps of high defect AlSb layers grown on Si substrates, while they are uniformly distributed on the surface at lower temperatures below 400 degrees C. It is also found that quantum dots located on the defect sites lead to effective termination of the propagation of micro-twin-induced structural defects into overlying layers, resulting in the low defect material grown on a largely mismatched substrate. The resulting 1.0 microm thick Al(x)Ga(1-x)Sb (x = 0.8) layer grown on the silicon substrate shows atomically flat (0.2 nm AFM mean roughness) surface and high crystal quality, represented by a narrow full width at half-maximum of 300 arc s in the x-ray rocking curve. The room-temperature electron mobility of higher than 16 000 cm(2) V(-1) s(-1) in InAs/AlGaSb FETs on the Si substrate is obtained with a relatively thin buffer layer, when a low defect density ( approximately 10(6) cm(-2)) AlGaSb buffer layer is obtained by the proposed method.

Chaotic indices and canonical ensemble of heart rate patterns in small-for-gestational age fetuses.

AIMS: We studied how linear and nonlinear heart rate dynamics differ between normal fetuses (n=135) and uncomplicated small-for-gestational age (SGA) fetuses (n=65), aged 32-40 weeks' gestation. METHODS: We analyzed each fetal heart rate time series for 20 min. We quantified the complexity (nonlinear dynamics) of each fetal heart rate (FHR) time series by approximate entropy (ApEn) and correlation dimension (CD). The linear dynamics were analyzed by canonical correlation analysis (CCA). RESULTS: The ApEn and CD of the uncomplicated SGA fetuses were significantly lower than that of the normal fetuses in all three gestational periods (32-34, 35-37, 38-40 weeks). Canonical correlation ensemble in SGA fetuses is slightly higher than normal ones in all three gestational periods, especially at 35-37 weeks. CONCLUSIONS: Irregularity and complexity of the heart rate dynamics of SGA fetuses are lower than that of normal ones. Also, canonical ensemble in SGA fetuses is higher than in normal ones, suggesting that the FHR control system has multiple complex interactions. Along with the clear difference between the two groups' non-linear chaotic dynamics in FHR patterns, we clarified the hidden subtle differences in linearity (e.g., canonical ensemble). The decrease in non-linear dynamics may contribute to the increase in linear dynamics. The present statistical methodology can be readily and routinely utilized in obstetrics and gynecologic fields.