Effects of the filter microstructure and ambient air condition on the aerodynamic dispersion of sneezing droplets: A multiscale and multiphysics simulation study.

Concerns have been ramping up with regard to the propagation of infectious droplets due to the recent COVID-19 pandemic. The effects of filter microstructures and ambient air flows on droplet dispersion by sneezing are investigated by a fully coupled Eulerian-Lagrangian computational modeling with a micro-to-macroscale bridging approach. Materials that are commonly applied to face masks are modeled to generate two different virtual masks with various levels of filtration efficiency, and the leakage percentages through the unsealed nose and cheek areas were set to 11% and 25%, respectively. The droplet propagation distance was simulated with and without mask wearing in still and windy conditions involving head wind, tail wind, and side wind. The results demonstrate that wearing a face mask reduces the transmittance distance of droplets by about 90%-95% depending on the mask type; nonetheless, the droplets can be transmitted to distances of 20-25 cm in the forward direction even with mask-wearing. Thus, a social distance of at least 20 cm between people would help to prevent them from becoming exposed to ejected droplets. This study is significant in that important aspects of mask materials, in this case the porous microstructure-dependent filtration efficiency and permeability under varied ambient flow conditions, were considered for the first time in an evaluation of the barrier performance against droplet transmittance through a multiphase computational fluid dynamics simulation of air-droplet interaction and turbulence flow dynamics.

Methylene blue microbubbles as a model dual-modality contrast agent for ultrasound and activatable photoacoustic imaging.

Ultrasound and photoacoustic imaging are highly complementary modalities since both use ultrasonic detection for operation. Increasingly, photoacoustic and ultrasound have been integrated in terms of hardware instrumentation. To generate a broadly accessible dual-modality contrast agent, we generated microbubbles (a standard ultrasound contrast agent) in a solution of methylene blue (a standard photoacoustic dye). This MB2 solution was formed effectively and was optimized as a dual-modality contrast solution. As microbubble concentration increased (with methylene blue concentration constant), photoacoustic signal was attenuated in the MB2 solution. When methylene blue concentration increased (with microbubble concentration held constant), no ultrasonic interference was observed. Using an MB2 solution that strongly attenuated all photoacoustic signal, high powered ultrasound could be used to burst the microbubbles and dramatically enhance photoacoustic contrast (>800-fold increase), providing a new method for spatiotemporal control of photoacoustic signal generation.

Biofunctionalized quantum dots for live monitoring of stem cells: applications in regenerative medicine.

AIM: This study aimed to live monitor the degree of endothelial progenitor cell (EPC) integration onto tissue-engineering scaffolds by conjugating relevant antibodies to quantum dots (QDs). MATERIALS & METHODS: Biocompatible mercaptosuccinic acid-coated QDs were functionalized with two different antibodies to EPC (CD133 with QDs of 640 nm wavelength [λ] and later-stage mature EPCs; and von Willebrand factor with QDs of λ595 and λ555 nm) using conventional carbomide and N-hydroxysuccinimide chemistry. Biofunctionalization was characterized with Fourier-transform infrared spectroscopy. Cell viability assays and gross morphology observations confirmed cytocompatibility and normal patterns of celluar growth. The antigens corresponding to each state of cell maturation were determined using a single excitation at λ488 nm. RESULTS: The optimal concentrations of antibody-QD conjugates were biocompatible, hemocompatible and determined the state of EPC transformation to endothelial cells. CONCLUSION: Antibody-functionalized QDs suggest new applications in tissue engineering of polymer-based implants where cell integration can potentially be monitored without requiring the sacrifice of implants.

Quantification of the wound healing using polarization-sensitive optical coherence tomography.

We use polarization-sensitive optical coherence tomography (PS-OCT) to monitor the wound healing process in vitro and in vivo, which are affected by various drugs. Five rabbit subjects are used for in vitro studies and another five are used for in vivo studies. The in vitro studies are conducted to compare the PS-OCT images with histopathology. For each subject, three biopsy lesions are created on each ear: one site is not treated (control); the second site is treated with sphingosylphosphorylcholine, which is expected to promote healing; and the last is administered with tetraacetylphytosphingosine, which negatively affects the healing process. Each site is examined with a PS-OCT system at 1, 4, 7, 10, and 14- days after wound generation. The variations of phase retardation values caused by the collagen morphology changes on wound sites are quantified for all cases. Our results suggest that PS-OCT may be a useful tool for visualization of collagen fiber regeneration and for quantification of various drug effects during the wound healing process.

Three-dimensional imaging of skin melanoma in vivo by dual-wavelength photoacoustic microscopy.

Dual-wavelength reflection-mode photoacoustic microscopy is used to noninvasively obtain three-dimensional (3-D) images of subcutaneous melanomas and their surrounding vasculature in nude mice in vivo. The absorption coefficients of blood and melanin-pigmented melanomas vary greatly relative to each other at these two optical wavelengths (764 and 584 nm). Using high-resolution and high-contrast photoacoustic imaging in vivo with a near-infrared (764-nm) light source, the 3-D melanin distribution inside the skin is imaged, and the maximum thickness of the melanoma (approximately 0.5 mm) is measured. The vascular system surrounding the melanoma is also imaged with visible light (584 nm) and the tumor-feeding vessels found. This technique can potentially be used for melanoma diagnosis, prognosis, and treatment planning.

Artifact removal in complex frequency domain optical coherence tomography with an iterative least-squares phase-shifting algorithm.

We present what we believe to be a new computational algorithm for complex frequency domain optical coherence tomography that can effectively suppress artifacts that are caused by uncertainty in phase shift due to sample motion and errors in reference phases. The algorithm treats the phase-shifting values as additional unknowns, and we can determine their exact values by analyzing interference fringes using the numerical least-squares technique. A series of simulations and experiments prove that this algorithm can effectively remove strong mirror-image artifacts because it is unaffected by random phase fluctuation.

Combined photoacoustic and molecular fluorescence imaging in vivo.

Because of the overwhelming scattering of light in biological tissues, the spatial resolution and imaging depth of conventional fluorescent imaging is unsatisfactory. Therefore, we present a dual modality imaging technique by combining fluorescence imaging with high-resolution noninvasive photoacoustic tomography (PAT) for the study of an animal tumor model. PAT provides high-resolution structural images of tumor angiogenesis, and fluorescence imaging offers high sensitivity to molecular probes for tumor detection. Coregistration of the PAT and fluorescence images was performed on nude mice with M21 human melanoma cell lines with ..v..3 integrin expression. An integrin ..v..3-targeted peptide-ICG conjugated NIR fluorescent contrast agent was used as the molecular probe for tumor detection. PAT was employed to noninvasively image the brain structure and the angiogenesis associated with tumors in mice. The coregistration between the PAT and fluorescence images was used to visualize tumor location, angiogenesis, and brain structure simultaneously.

Mucoepidermoid carcinoma of the thymus: a case report.

Mucoepidermoid carcinoma of the thymus is an extremely rare malignant mediastinal neoplasm, and to our knowledge, only 13 cases have been reported. We report a case of mucoepidermoid carcinoma of the thymus that was seen in a 53-yr-old man with right chest pain. Chest CT scan showed a huge, cystic mass having a focal solid portion with direct invasion of the adjacent anterior chest wall and pericardium in the anterior mediastinum. Mucoepidermoid carcinoma of the thymus should be included in the differential diagnosis for masses of the anterior mediastinum associated with extensive cystic changes, although the carcinoma is exceedingly rare.

Polarization-sensitive speckle spectroscopy of scattering media beyond the diffusion limit.

A scattering-media-characterization method that uses partially coherent radiation and polarization discrimination of multiply scattered light is described. The method is based on an analysis of the dependence of speckle contrast on the coherence length of the probe light. Polarization discrimination of detected speckles makes it possible to select scattered-light components that propagate in the probed medium at different distances. A theoretical analysis of the polarization-dependent speckle contrast as influenced by the probe-light coherence and parameters of the probed medium is presented. Experimental results obtained with various nondiffuse scattering samples are presented.

Polarization-sensitive optical coherence tomography for photoelasticity testing of glass/epoxy composites.

We measure the spatial distribution of the mechanical stress induced inside translucent glass/epoxy composites by means of polarizationsensitive optical coherence tomography. The Stokes parameters determined from two orthogonal polarization components of the backscattered light allow the internal stress to be identified in terms of its magnitude and principal direction based on a birefringence light scattering model of glass/epoxy composites. Measurement examples show the particular case of stress concentration near a through hole and the internal structural damages caused by excessive tensile loading.