Angularly offset multiline dispersive optical phased array enabling large field of view and plateau envelope.

We propose and demonstrate an angularly offset multiline (AOML) dispersive silicon nitride optical phased array (OPA) that enables efficient line beam scanning with an expanded field of view (FOV) and plateau envelope. The suggested AOML OPA incorporates multiline OPA units, which were seamlessly integrated with a 45° angular offset through a thermo-optic switch based on a multimode interference coupler, resulting in a wide FOV that combines three consecutive scanning ranges. Simultaneously, a periodic diffraction envelope rendered by the multiline OPA units contributes to reduced peak intensity fluctuation of the main lobe across the large FOV. An expedient polishing enabling the angled facet was diligently accomplished through the implementation of oblique polishing techniques applied to the 90° angle of the chip. For each dispersive OPA unit, we engineered an array of delay lines with progressively adjustable delay lengths, enabling a passive wavelength-tunable beam scanning. Experimental validation of the proposed OPA revealed efficient beam scanning, achieved by wavelength tuning from 1530 to 1600 nm and seamless switching between multiline OPAs, yielding an FOV of 152° with a main lobe intensity fluctuation of 2.8 dB. The measured efficiency of dispersive scanning was estimated at 0.97°/nm, as intended.

High-performance optical phased array for LiDARs demonstrated by monolithic integration of polymer and SiN waveguides.

Optical phased array (OPA) beam scanners for light detection and ranging (LiDAR) are proposed by integrating polymer waveguides with superior thermo-optic effect and silicon nitride (SiN) waveguides exhibiting strong modal confinement along with high optical power capacity. A low connection loss of only 0.15 dB between the polymer and SiN waveguides was achieved in this work, enabling a low-loss OPA device. The polymer-SiN monolithic OPA demonstrates not only high optical throughput but also efficient beamforming and stable beam scanning. This novel integrative approach highlights the potential of leveraging heterogeneous photonic materials to develop advanced photonic integrated circuits with superior performance.

Monolithic integration of polymer waveguide phase modulators with silicon nitride waveguides using adiabatic transition tapers.

Polymer waveguide phase modulators (PMs) demonstrate high thermal confinement with outstanding thermo-optic properties and can provide stable low-power phase modulation in optical phased arrays (OPA). On the other hand, silicon nitride (SiN) waveguides produce stronger optical confinement with smaller waveguide core sizes than polymer waveguides and can handle high optical power without nonlinear effects. In this work, a high-performance PM was achieved by monolithic integration of a polymer waveguide and tapered SiN input and output waveguides. The integration of heterogeneous waveguide materials on a single substrate will enable the fabrication of efficient OPAs for advanced imaging, display, sensing, and communications applications.

Dispersive silicon-nitride optical phased array incorporating arrayed waveguide delay lines for passive line beam scanning.

As optical phased arrays (OPAs), used as solid-state beam scanning elements, swiftly stride towards higher efficiency and faster scanning speed, the line beam scanner is emerging as a viable substitute for its counterpart relying on point-beam-incorporated raster scanning. However, line-beam scanners require active phase shifters for beam scanning; thus, they consume more power and have complex device designs. This study proposes and demonstrates a dispersive silicon-nitride OPA that allows for passive wavelength-tuned steering of a line beam with an elongated vertical beamwidth. To steer the line beam passively covering the two-dimensional field of view, we deployed an array of delay lines with progressive delay lengths across adjacent channels. Furthermore, adiabatic tapers that allow precise effective array aperture adjustment are used as emitter elements to flexibly realize different vertical beamwidths. Combinations of different delay-length differences and taper tip-widths resulted in beam coverage (lateral × vertical) ranging from 6.3° × 19° to 23.8° × 40° by tuning the wavelength from 1530 to 1600 nm. The main lobe emission throughput was as small as - 2.8 dB. To the best of our knowledge, the embodied OPA is the first demonstration of a passive line beam scanner facilitating an adjustable beam coverage with quick operation and enhanced efficiency.

Frequency Response of Thermo-Optic Phase Modulators Based on Fluorinated Polyimide Polymer Waveguide.

Polymer waveguide phase modulators exhibit stable low-power phase modulation owing to their exceptional thermal confinement and high thermo-optic effect, and thus, have the merit of thermal isolation between channels, which is crucial for an optical phased array (OPA) beam scanner device. In this work, a waveguide phase modulator was designed and fabricated based on a high-refractive-index fluorinated polyimide. The propagation loss of the polyimide waveguide and the temporal response of the phase modulator were characterized. Moreover, the transfer function of the phase modulator including multiple poles and zeros was obtained from the measured frequency response. The polyimide waveguide modulator device demonstrated a fast response time of 117 µs for 1 kHz input signal, however, for 1 mHz step-function input, it exhibited an additional 5% phase change in 5 s.

Fast-running beamforming algorithm for optical phased array beam scanners comprised of polymeric waveguide devices.

The phase error imposed in optical phased arrays (OPAs) for beam scanning LiDAR is unavoidable due to minute dimensional fluctuations that occur during the waveguide manufacturing process. To compensate for the phase error, in this study, a fast-running beamforming algorithm is developed based on the rotating element vector method. The proposed algorithm is highly suitable for OPA devices comprised of polymer waveguides, where thermal crosstalk between phase modulators is suppressed effectively, allowing for each phase modulator to be controlled independently. The beamforming speed is determined by the number of phase adjustments. Hence, by using the least square approximation for a 32-channel polymer waveguide OPA device the number of phase adjustments needed to complete beamforming was reduced and the beamforming time was shortened to 16 seconds.

Compact solid-state optical phased array beam scanners based on polymeric photonic integrated circuits.

Optical phased array (OPA) devices are being actively investigated to develop compact solid-state beam scanners, which are essential in fields such as LiDAR, free-space optical links, biophotonics, etc. Based on the unique nature of perfluorinated polymers, we propose a polymer waveguide OPA with the advantages of low driving power and high optical throughput. Unlike silicon photonic OPAs, the polymer OPAs enable sustainable phase distribution control during beam scanning, which reduces the burden of beamforming. Moreover, by incorporating a tunable wavelength laser comprising a polymer waveguide Bragg reflector, two-dimensional beam scanning is demonstrated, which facilitates the development of laser-integrated polymeric OPA beam scanners.

Polymeric tunable wavelength filter with two-stage cascaded tilted Bragg gratings.

Wavelength-division multiplexed optical communication systems used in 5G networks require tunable wavelength filters with narrow bandwidth for 100 GHz channel spacing, wide wavelength range to cover 16 channels, and a side mode suppression ratio (SMSR) exceeding 30 dB. To fabricate wavelength filters satisfying these specifications, tunable Bragg grating filters based on polymeric optical waveguides are proposed. The combination of mode-sorting waveguide and tilted Bragg grating enables the extraction of Bragg reflected signals to another path, without using an external circulator. Moreover, the double reflection by the two-stage cascaded structure produces narrower reflection bandwidth, improved SMSR characteristics, and reduced adjacent-channel crosstalk through the suppression of undesired mode coupling. The proposed device exhibits a 20 dB bandwidth of 1.0 nm and SMSR of 35 dB, over the entire wavelength-tuning range.

Silicon nitride optical phased array based on a grating antenna enabling wavelength-tuned beam steering.

An optical phased array (OPA) in silicon nitride (SiN) is conspicuously highlighted as a vital alternative to its counterpart in silicon. However, a limited number of studies have been conducted on this array in terms of wavelength-tuned beam steering. A SiN OPA has been proposed and implemented with a grating antenna that incorporated an array of shallow-etched waveguides, rendering wavelength-tuned beam steering along the longitudinal direction. To accomplish a superior directionality on a wavelength-tuned beam steering, the spectral beam emission characteristics of the antenna have been explored from the viewpoint of a planar structure that entails a buried oxide (BOX), a SiN waveguide core, and an upper cladding. Two OPA devices having substantially different thicknesses of the resonant cavities, established by combining the BOX and SiN core, were considered theoretically and experimentally to scrutinize the spectral emission characteristics of the antenna on beam steering. Both of the fabricated OPA devices steered light by an angle of 7.4° along the longitudinal direction for a wavelength ranging from 1530 to 1630 nm, while they maintained a divergence angle of 0.2°×0.6° in the longitudinal and lateral directions. Meanwhile, the OPA fabricated on a substantially thick BOX layer featured a limited steering performance to attain a stabilized response over a broad spectral region. We examined the influence of the cavity thickness on the spectral response of the antenna in terms of optical thickness. Based on the two antenna characteristics, it was confirmed that the grating antenna emitted the beam with a higher efficiency when the optical thickness of the cavity corresponded to odd integer multiples of the quarter wavelength. This work is a considerable strategy for designing a stabilized SiN OPA over a desired spectral region.

Temporal response of polymer waveguide beam scanner with thermo-optic phase-modulator array.

Solid-state light detection and ranging, capable of performing beam scanning without using any mechanical moving parts, requires a phase-modulator array. Polymers facilitate the fabrication of efficient phase modulators with low drive power, owing to their high thermo-optic (TO) effect and low thermal conductivity. We designed and fabricated a polymeric phase-modulator array and analyzed the temporal response of the TO phase modulator. The frequency response of the phase modulator was measured for a Mach-Zehnder interferometer (MZI), and the transfer function was modeled in terms of multiple poles and zeros. The frequency response of a fabricated beam-scanning device incorporating the TO phase modulator was also measured. The temporal response of the beam scanner was confirmed to coincide well with that of the MZI modulator. The device exhibited a fast rise time of 12 ms, accompanied by slight power variations appearing for a long period (over hundreds of seconds), which originated from the inherent viscoelastic effect of the polymer materials.

Polymer waveguide WDM channel selector operating over the entire C and L bands.

A tunable channel selector operating over both the C and L bands of wavelength-division-multiplexing optical network is proposed based on a thermo-optic tunable Bragg grating device in a polymer waveguide. A tilted Bragg grating cascaded with an asymmetric Y-branch waveguide effectively implements a small Bragg-reflection wavelength filter that does not require an external circulator. To increase the operating wavelength span of the channel selector, two Bragg gratings with different periods are fabricated on a single substrate for covering C and L bands, respectively. A wide tuning range over 80 nm along with a narrow bandwidth is demonstrated. Moreover, the polarization dependence of the reflection spectrum is observed to be less than 0.1 nm.

Optical Waveguide Tunable Phase Delay Lines Based on the Superior Thermo-Optic Effect of Polymer.

Strong thermo-optic effect of polymers is useful for fabricating tunable phase-delay devices with low power consumption and wide tuning range. However, if the temperature change is increased to extend the tuning range, an attenuation of the guided light is accompanied by the refractive index gradient across the waveguide core. For three different waveguide structures, in this study, the optimal structure of the device for a variable phase delay line was found by investigating the attenuation and interference phenomena accompanying phase modulation. By improving the uniformity of thermal distribution across the waveguide core, a phase delay of 130π rad was obtained with an output attenuation less than 0.5 dB.

Bias-free optical current sensors based on quadrature interferometric integrated optics.

A reflective quadrature interferometer was constructed by integrating polymeric optical waveguide components, to demonstrate an optical current sensor that could operate without bias feedback control. In order to obtain two interference signals with a phase difference of 90°, half-wave and quarter-wave plates were inserted in the polymeric optical waveguide chip, and a polarization-dependent birefringence modulator was used for the initialization of the optical sensor, including detector gain adjustment. During the bias-free operation of the sensor, the measurement error was less than ± 0.2%, and it was confirmed that the sensor output was stable for 15 h even if the operating point was not maintained.

Broadband integrated optic polarization splitters by incorporating polarization mode extracting waveguide.

A compact integrated optic polarization splitter is highly anticipated for polarization multiplexed optical communications, dual polarization optical sensors, single photon quantum signal processing, etc. In this work, we propose and demonstrate a polarization mode extracting device using a highly birefringent crosslinked liquid crystal polymer, reactive mesogen. The device includes the birefringent material inserted into a Y-branch optical waveguide to extract the TE polarized mode. A polarization splitting ratio of 27 dB was obtained, and a crosstalk of less than -25 dB was maintained for a wavelength range of 1500~1600 nm. The device exhibited good thermal stability at 100 °C for 12 hours. The broadband operating characteristic is a unique advantage of the proposed mode extracting polarization splitter.

Integrated optic polarization splitter based on total internal reflection from a birefringent polymer.

An integrated optic polarization splitter with large fabrication tolerance and high reliability is required for optical signal processing in quantum-encrypted communication systems. A polarization splitter based on total internal reflection from a highly birefringent polymer-reactive mesogen-is proposed and demonstrated in this work. The device consists of a mode expander for reducing the wave vector distribution of the guided mode, and an interface with a large birefringence. Several polymers with suitable refractive indexes were used for fabricating the device. We obtained a polarization splitter with a low crosstalk (less than -30 dB), and a large fabrication tolerance.

A Light Scattering Layer for Internal Light Extraction of Organic Light-Emitting Diodes Based on Silver Nanowires.

We propose and fabricate a random light scattering layer for light extraction in organic light-emitting diodes (OLEDs) with silver nanodots, which were obtained by melting silver nanowires. The OLED with the light scattering layer as an internal light extraction structure was enhanced by 49.1% for the integrated external quantum efficiency (EQE). When a wrinkle structure is simultaneously used for an external light extraction structure, the total enhancement of the integrated EQE was 65.3%. The EQE is maximized to 65.3% at a current level of 2.0 mA/cm(2). By applying an internal light scattering layer and wrinkle structure to an OLED, the variance in the emission spectra was negligible over a broad viewing angle. Power mode analyses with finite difference time domain (FDTD) simulations revealed that the use of a scattering layer effectively reduced the waveguiding mode while introducing non-negligible absorption. Our method offers an effective yet simple approach to achieve both efficiency enhancement and spectral stability for a wide range of OLED applications.

Tunable channel drop filters consisting of a tilted Bragg grating and a mode sorting polymer waveguide.

Optical wavelength filters with large tuning range and narrow bandwidth are crucial for enhancing the capability of WDM communication systems. A polymeric tunable filter for C-band, comprising a tilted Bragg grating and a mode sorting waveguide junction is proposed in this work. For dropping a certain wavelength signal, the tilted Bragg grating reflects an odd mode into an even mode and then the reflected even mode propagates towards an output port of the asymmetric Y-junction due to the mode sorting. Consequently, the output port is separated from the input port, which is not possible in an ordinary Bragg reflector. The tilted Bragg reflector with an odd-even mode coupling efficiency of 61% exhibited a maximum reflectivity of 95% for a grating of 6 mm. A linear wavelength tuning of over 10 nm was achieved for an applied thermal power of 312 mW.

Integrated-optic current sensors with a multimode interference waveguide device.

Optical current sensors based on polarization-rotated reflection interferometry are demonstrated using polymeric integrated optics and various functional optical waveguide devices. Interferometric sensors normally require bias feedback control for maintaining the operating point, which increases the cost. In order to resolve this constraint of feedback control, a multimode interference (MMI) waveguide device is integrated onto the current-sensor optical chip in this work. From the multiple outputs of the MMI, a 90° phase-shifted transfer function is obtained. Using passive quadrature demodulation, we demonstrate that the sensor could maintain the output signal regardless of the drift in the operating bias-point.

Surface relief apodized grating tunable filters produced by using a shadow mask.

To produce a compact low-cost tunable filter required for WDM optical communications, a polymeric Bragg reflection filter with an apodized grating structure is proposed. A high-contrast polymeric waveguide is incorporated in order to obtain high reflectivity from a short Bragg grating. To overcome the bandwidth broadening, an apodized grating with a gradually changing depth of surface relief grating along the propagation direction is fabricated through the dry etching with a shadow mask. The apodized polymer grating exhibits 3-dB, 20-dB bandwidths of 0.36 nm, and 0.72 nm, respectively with a 95% reflection. The reflection wavelength is tunable over 14 nm for an applied thermal power of 500 mW.

Integrated optic current transducers incorporating photonic crystal fiber for reduced temperature dependence.

Optical current transducers (OCT) are indispensable for accurate monitoring of large electrical currents in an environment suffering from severe electromagnetic interference. Temperature dependence of OCTs caused by its components, such as wave plates and optical fibers, should be reduced to allow temperature-independent operation. A photonic crystal fiber with a structural optical birefringence was incorporated instead of a PM fiber, and a spun PM fiber was introduced to overcome the temperature-dependent linear birefringence of sensing fiber coil. Moreover, an integrated optic device that provides higher stability than fiber-optics was employed to control the polarization and detect the phase of the sensed optical signal. The proposed OCT exhibited much lower temperature dependence than that from a previous study. The OCT satisfied the 0.5 accuracy class (IIEC 60044-8) and had a temperature dependence less than ± 1% for a temperature range of 25 to 78 °C.