Structural and functional characterization of nylon hydrolases.

Biodegradation of synthetic polymers is recognized as a useful way to reduce their environmental load and pollution, loss of natural resources, extensive energy consumption, and generation of greenhouse gases. The potential use of enzymes responsible for the degradation of the targeted polymers is an effective approach which enables the conversion of the used polymers to original monomers and/or other useful compounds. In addition, the enzymes are expected to be applicable in industrial processes such as improving the surface structures of the polymers. Especially, conversion of the solid polymers to soluble oligomers/monomers is a key step for the biodegradation of the polymers. Regarding the hydrolysis of polyamides, three enzymes, 6-aminohexanoate-cyclic-dimer hydrolase (NylA), 6-aminohexanoate-dimer hydrolase (NylB), and 6-aminohexanoate-oligomer endo-hydrolase (nylon hydrolase, NylC), are found in several bacterial strains. In this chapter, we describe our approach for the screening of microorganisms which degrade nylons and related compounds; preparation of substrates; assay of hydrolytic activity for soluble and insoluble substrates; and X-ray crystallographic and computational approaches for analysis of structure and catalytic mechanisms of the nylon-degrading enzymes.

Two alternative modes for optimizing nylon-6 byproduct hydrolytic activity from a carboxylesterase with a beta-lactamase fold: X-ray crystallographic analysis of directly evolved 6-aminohexanoate-dimer hydrolase.

Promiscuous 6-aminohexanoate-linear dimer (Ald)-hydrolytic activity originally obtained in a carboxylesterase with a beta-lactamase fold was enhanced about 80-fold by directed evolution using error-prone PCR and DNA shuffling. Kinetic studies of the mutant enzyme (Hyb-S4M94) demonstrated that the enzyme had acquired an increased affinity (K(m) = 15 mM) and turnover (k(cat) = 3.1 s(-1)) for Ald, and that a catalytic center suitable for nylon-6 byproduct hydrolysis had been generated. Construction of various mutant enzymes revealed that the enhanced activity in the newly evolved enzyme is due to the substitutions R187S/F264C/D370Y. Crystal structures of Hyb-S4M94 with bound substrate suggested that catalytic function for Ald was improved by hydrogen-bonding/hydrophobic interactions between the Ald--COOH and Tyr370, a hydrogen-bonding network from Ser187 to Ald--NH(3) (+), and interaction between Ald--NH(3) (+) and Gln27-O(epsilon) derived from another subunit in the homo-dimeric structure. In wild-type Ald-hydrolase (NylB), Ald-hydrolytic activity is thought to be optimized by the substitutions G181D/H266N, which improve an electrostatic interaction with Ald--NH(3) (+) (Kawashima et al., FEBS J 2009; 276:2547-2556). We propose here that there exist at least two alternative modes for optimizing the Ald-hydrolytic activity of a carboxylesterase with a beta-lactamase fold.

Molecular design of a nylon-6 byproduct-degrading enzyme from a carboxylesterase with a beta-lactamase fold.

A carboxylesterase with a beta-lactamase fold from Arthrobacter possesses a low level of hydrolytic activity (0.023 mumol.min(-1).mg(-1)) when acting on a 6-aminohexanoate linear dimer byproduct of the nylon-6 industry (Ald). G181D/H266N/D370Y triple mutations in the parental esterase increased the Ald-hydrolytic activity 160-fold. Kinetic studies showed that the triple mutant possesses higher affinity for the substrate Ald (K(m) = 2.0 mm) than the wild-type Ald hydrolase from Arthrobacter (K(m) = 21 mm). In addition, the k(cat)/K(m) of the mutant (1.58 s(-1).mm(-1)) was superior to that of the wild-type enzyme (0.43 s(-1).mm(-1)), demonstrating that the mutant efficiently converts the unnatural amide compounds even at low substrate concentrations, and potentially possesses an advantage for biotechnological applications. X-ray crystallographic analyses of the G181D/H266N/D370Y enzyme and the inactive S112A-mutant-Ald complex revealed that Ald binding induces rotation of Tyr370/His375, movement of the loop region (N167-V177), and flip-flop of Tyr170, resulting in the transition from open to closed forms. From the comparison of the three-dimensional structures of various mutant enzymes and site-directed mutagenesis at positions 266 and 370, we now conclude that Asn266 makes suitable contacts with Ald and improves the electrostatic environment at the N-terminal region of Ald cooperatively with Asp181, and that Tyr370 stabilizes Ald binding by hydrogen-bonding/hydrophobic interactions at the C-terminal region of Ald.

Nylon-oligomer degrading enzyme/substrate complex: catalytic mechanism of 6-aminohexanoate-dimer hydrolase.

We performed X-ray crystallographic analyses of 6-aminohexanoate-dimer hydrolase (Hyb-24DN), an enzyme responsible for the degradation of nylon-6, an industry by-product, and of a complex between Hyb-24DN-A(112) (S112A-mutant of Hyb-24DN) and 6-aminohexanoate-linear dimer (Ald) at 1.58 A and 1.4 A resolution, respectively. In Hyb-24DN, Asp181-O(delta) forms hydrogen bonds with Tyr170-O(eta), -two of the catalytic and binding amino acids, and a loop between Asn167 and Val177. This state is the so-called open form, allowing its substrate to bind in the space between the loop and catalytic residues. Upon substrate binding (in Hyb-24DN-A(112)/Ald complex), the loop is shifted 4.3 A at Tyr170-C(alpha), and the side-chain of Tyr170 is rotated. By the combined effect, Tyr170-O(eta) moves a total of 10.5 A, resulting in the formation of hydrogen bonds with the nitrogen of amide linkage in Ald (closed form). In addition, electrostatic interaction between Asp181-O(delta) and the amino group in Ald stabilizes the substrate binding. We propose here that the enzyme catalysis proceeds according to the following steps: (i) Ald-induced transition from open to closed form, (ii) nucleophilic attack of Ser112 to Ald and formation of a tetrahedral intermediate, (iii) formation of acyl enzyme and transition to open form, (iv) deacylation. Amino acid substitutions reducing the enzyme/Ald interaction at positions 181 or 170 drastically decreased the Ald-hydrolytic activity, but had very little effect on esterolytic activity, suggesting that esterolytic reaction proceeds regardless of conversion. Present models illustrate why new activity against the nylon oligomer has evolved in an esterase with beta-lactamase folds, while retaining the original esterolytic functions.

Mutational analysis of 6-aminohexanoate-dimer hydrolase: relationship between nylon oligomer hydrolytic and esterolytic activities.

Carboxylesterase (EII') from Arthrobacter sp. KI72 has 88% homology to 6-aminohexanoate-dimer hydrolase (EII) and possesses ca. 0.5% of the level of 6-aminohexanoate-linear dimer (Ald)-hydrolytic activity of EII. To study relationship between Ald-hydrolytic and esterolytic activities, random mutations were introduced into the gene for Hyb-24 (an EII/EII' hybrid with the majority of the sequence deriving for EII' and possessing an EII'-like level of Ald-hydrolytic activity). Either a G181D or a D370Y substitution in Hyb-24 increased the Ald-hydrolytic activity ca. 10-fold, and a G181D/D370Y double substitution increased activity ca. 100-fold. On the basis of kinetic studies and the three-dimensional structure of the enzyme, we suggest that binding of Ald is improved by these mutations. D370Y increased esterolytic activity for glycerylbutyrate ca. 30-50-fold, whereas G181D decreased the activity to 30% of the parental enzyme.

X-ray crystallographic analysis of 6-aminohexanoate-dimer hydrolase: molecular basis for the birth of a nylon oligomer-degrading enzyme.

6-Aminohexanoate-dimer hydrolase (EII), responsible for the degradation of nylon-6 industry by-products, and its analogous enzyme (EII') that has only approximately 0.5% of the specific activity toward the 6-aminohexanoate-linear dimer, are encoded on plasmid pOAD2 of Arthrobacter sp. (formerly Flavobacterium sp.) KI72. Here, we report the three-dimensional structure of Hyb-24 (a hybrid between the EII and EII' proteins; EII'-level activity) by x-ray crystallography at 1.8 A resolution and refined to an R-factor and R-free of 18.5 and 20.3%, respectively. The fold adopted by the 392-amino acid polypeptide generated a two-domain structure that is similar to the folds of the penicillin-recognizing family of serine-reactive hydrolases, especially to those of d-alanyl-d-alanine-carboxypeptidase from Streptomyces and carboxylesterase from Burkholderia. Enzyme assay using purified enzymes revealed that EII and Hyb-24 possess hydrolytic activity for carboxyl esters with short acyl chains but no detectable activity for d-alanyl-d-alanine. In addition, on the basis of the spatial location and role of amino acid residues constituting the active sites of the nylon oligomer hydrolase, carboxylesterase, d-alanyl-d-alanine-peptidase, and beta-lactamases, we conclude that the nylon oligomer hydrolase utilizes nucleophilic Ser(112) as a common active site both for nylon oligomer-hydrolytic and esterolytic activities. However, it requires at least two additional amino acid residues (Asp(181) and Asn(266)) specific for nylon oligomer-hydrolytic activity. Here, we propose that amino acid replacements in the catalytic cleft of a preexisting esterase with the beta-lactamase fold resulted in the evolution of the nylon oligomer hydrolase.

Crystallization and X-ray diffraction analysis of 6-aminohexanoate-dimer hydrolase from Arthrobacter sp. KI72.

To investigate the structure-function relationship between 6-aminohexanoate-dimer hydrolase (EII) from Arthrobacter sp. and a cryptic protein (EII') which shows 88% sequence identity to EII, a hybrid protein (named Hyb-24) of EII and EII' was overexpressed, purified and crystallized using the sitting-drop vapour-diffusion method with ammonium sulfate as a precipitant in MES buffer pH 6.5. The crystal belongs to space group P3(1)21 or P3(2)21, with unit-cell parameters a = b = 96.37, c = 113.09 A. Diffraction data were collected from native and methylmercuric chloride derivative crystals to resolutions of 1.75 and 1.80 A, respectively.