Three-Dimensional Quantification of Postoperative Facial Asymmetry in Patients With Unilateral Cleft lip and Palate Using Facial Symmetry Plane.

OBJECTIVE: To quantitatively assess three-dimensional (3D) soft tissue facial asymmetry in patients with unilateral cleft lip and palate (UCLP) who have undergone primary lip repair. DESIGN: Clinical, retrospective, comparative, methodological study. PATIENTS/PARTICIPANTS: Twenty patients with UCLP were selected after a review of the records. INCLUSION CRITERIA: Complete UCLP; surgically treated without secondary repair. An age-matched and sex-matched Control group was employed. MAIN OUTCOME MEASURES: A 3D facial symmetry plane (FSP) was obtained by superimposing the point clouds of the original 3D facial image excluding the surgical site and including lip and nose areas and those of a mirrored facial image using the iterative closest point (ICP) adjustment method. The discrepancies in the depth and angle of the normal vector of the facial surface of each point cloud between right and left sides (cleft and non-cleft sides in the UCLP group, respectively) based on FSP were calculated. RESULTS: Facial asymmetry in the UCLP group was significantly greater than in the Control group regarding both the discrepancies in the depth (1.34 ± 0.62, 0.73 ± 0.32 pixels, respectively) (P = .0004) and surface angle (18.0 ± 5.88, 12.8 ± 4.0°, respectively) (P = .0024). Biaxial assessment of the discrepancies in the depth and surface angle allowed us to visually extract UCLP patients with greater facial asymmetry. CONCLUSIONS: Facial asymmetry analysis based on 3D FSP effectively facilitates the facial asymmetry quantification and soft tissue surgical outcome evaluation in patients with UCLP.

Using three-dimensional nasal forms to compare definitive unilateral cleft lip nose correction with/without a cross-lap joint cartilage graft technique.

To compare three-dimensional (3D) nasal forms after definitive correction of unilateral cleft lip (UCL)-nose using an extended spreader cartilage graft with/without a cross-lap joint cartilage graft technique. Twenty-four patients with UCL who underwent definitive nose correction using an extended spreader cartilage graft with a cross-lap joint technique (CLJ group) and fifteen patients with UCL who underwent nose correction without a cross-lap joint technique (non-CLJ group) were enrolled in this study. Pre- and postoperative 3D nasal forms were compared between the two groups. The CLJ group demonstrated more successful recovery of the nasal tip and anterior nasal ridge in the center of the face (P < 0.01), and the higher nasal tip was maintained for more than 1 year (P = 0.008). The differences in the cephalo-caudal heights of the nasal alar groove and curvatures of the alar groove arch were successfully improved in both CLJ and non-CLJ groups. The nasal angles on lateral profiles did not change in either group. An extended spreader cartilage graft with a cross-lap joint technique facilitates satisfactory recovery of the nasal tip in the center of the face and a higher nasal tip, avoiding over-projection in the definitive correction of UCL-nose.

Three-dimensional analyses of nasolabial forms and upper lip surface symmetry after primary lip repair in patients with complete unilateral cleft lip and palate.

PURPOSE: To analyze three-dimensional (3D) nasolabial forms and upper lip surface symmetry after primary lip repair in children with unilateral cleft lip and palate (UCLP). METHODS: Subjects were 22 Japanese children with complete UCLP who underwent primary lip repair and were followed-up for 4-6 years. The 3D coordinates of facial landmarks and the angle and radius of the approximate nasal alar circle were calculated. Upper lip surface symmetry was analyzed using histogram intersection. RESULTS: The nasal tip and columella base were slightly dislocated to the cleft side, and the midpoint of Cupid's bow shifted to the non-cleft side. The nasal alar and the top of Cupid's bow were reconstructed at the same height, while the approximate nasal alar circle was smaller on the cleft side. The mean value of similarity for upper lip surface symmetry was 0.82; a subject with a higher value had more symmetrical contour lines in the visualized surface image. CONCLUSIONS: Postoperative nasolabial forms were almost restored to symmetrical levels, while retaining a small nasal alar. Histogram intersection is applicable as a method for the quantitative evaluation of upper lip surface symmetry in UCLP.

Pilot Study of Visual and Quantitative Image Analysis of Facial Surface Asymmetry in Unilateral Complete Cleft Lip and Palate.

OBJECTIVE: To visualize and quantitatively analyze facial surface asymmetry following primary cleft lip repair in patients with unilateral cleft lip and palate (UCLP) and to compare this with noncleft controls. DESIGN: Retrospective comparative study. PATIENTS: Twenty-two patients with complete UCLP who underwent primary lip repair from 2009 to 2013 were enrolled in this study. The preserved 3-dimensional (3D) data of 23 healthy Japanese participants with the same age were used as controls. INTERVENTIONS: All patients had received primary labioplasty in accordance with Cronin triangular flap method with orbicular oris muscle reconstruction. MAIN OUTCOME MEASURES: Shadow and zebra images established from moiré images, which were reconstructed from 3D facial data using stereophotogrammetry, were bisected and reversed by the symmetry axes (the middle line of the face). The discrepancies of the gravity and density between cleft and noncleft sides in 2 regions of interest, facial and lip areas, were then calculated and compared with those of healthy participants. RESULTS: In the UCLP group, the mean discrepancies of gravity on shadow and zebra images were 1.76 ± 0.70 and 2.63 ± 1.72 pixels, respectively, in the facial area and 1.31 ± 0.36 and 3.83 ± 2.08 pixels, respectively, in the lip area. There was a significant difference in the mean discrepancies of gravity and density on zebra images in the lip area between the UCLP and control groups. CONCLUSIONS: Our image analysis of digital facial surface asymmetry in patients with UCLP provides visual and quantitative information, and it may contribute to improvements in muscle reconstruction on cleft lip repair.

Preliminary Analysis of the 3-Dimensional Morphology of the Upper Lip Configuration at the Completion of Facial Expressions in Healthy Japanese Young Adults and Patients With Cleft Lip.

PURPOSE: To develop criteria for the analysis of upper lip configuration of patients with cleft lip while they produce various facial expressions by comparing the 3-dimensional (3D) facial morphology of healthy Japanese adults and patients with cleft lip. PATIENTS AND METHODS: Twenty healthy adult Japanese volunteers (10 men, 10 women, controls) without any observed facial abnormalities and 8 patients (4 men, 4 women) with unilateral cleft lip and palate who had undergone secondary lip and nose repair were recruited for this study. Facial expressions (resting, smiling, and blowing out a candle) were recorded with 2 Artec MHT 3D scanners, and images were superimposed by aligning the T-zone of the faces. The positions of 14 specific points were set on each face, and the positional changes of specific points and symmetry of the upper lip cross-section were analyzed. Furthermore, the configuration observed in healthy controls was compared with that in patients with cleft lip before and after surgery. RESULTS: The mean absolute values for T-zone overlap ranged from 0.04 to 0.15 mm. Positional changes of specific points in the controls showed that the nose and lip moved backward and laterally upward when smiling and the lips moved forward and downward medially when blowing out a candle; these movements were bilaterally symmetrical in men and women. In patients with cleft lip, the positional changes of the specific points were minor compared with those of the controls while smiling and blowing out a candle. The left-versus-right symmetry of the upper lip cross-section exceeded 1.0 mm in patients with cleft lip, which was markedly higher than that in the controls (0.17 to 0.91 mm). These left-versus-right differences during facial expressions were decreased after surgery. CONCLUSION: By comparing healthy individuals with patients with cleft lip, this study has laid the basis for determining control values for facial expressions.

Clinical and 3-Dimensional Analyses of Nasal Forms After Secondary Correction of Cleft Lip-Nose Deformities Using Extended Spreader Cartilage Graft With a Cross-Lap Joint Technique.

PURPOSE: A surgical strategy for definitive cleft lip-nasal correction that stably provides symmetric and natural nasal forms has not been established to date. The purpose of this study was to describe our surgical techniques and 3-dimensional (3D) assessment results after the definitive correction of cleft lip-nose deformity using an extended spreader cartilage graft with a cross-lap joint technique to achieve a rigid strut for lower lateral cartilage repositioning to obtain a desirable nasal tip projection. PATIENTS AND METHODS: This study enrolled 14 patients with unilateral cleft lip (UCL) with or without cleft palate and 8 patients with bilateral cleft lip (BCL) with or without cleft palate who underwent definitive nose correction and were followed for 1 to 3 years. All patients were treated by open rhinoplasty, repositioning of the lower lateral cartilage, use of an extended spreader cartilage graft with a cross-lap joint technique for nasal tip support, and medial-upward advancement of nasolabial components with vestibular expansion by a free mucosal graft. For the BCL nose, pedicle flaps from rim skin were used for columella lengthening. Preoperative and postoperative nasal forms were 3-dimensionally analyzed by use of 3D images serially obtained in 12 patients. RESULTS: The postoperative nasal forms were satisfactorily improved in all patients, without any serious postoperative complications. Preoperative and postoperative 3D analyses showed a significantly projected nasal tip in the postoperative noses of patients in both the UCL group and the BCL group (P < .01 and P < .05, respectively) and a sharper nasal tip angle in the BCL group (P < .05). Lateral deviation of the nasal tip was significantly improved in the center of the face in patients in the UCL group (P < .01). CONCLUSIONS: The results of this study suggest that the extended spreader cartilage graft using the cross-lap joint graft technique is useful to provide a desirable projection of the nasal tip in the center of the face on definitive correction of both UCL and BCL nose deformities.

Outcome following secondary autogenous bone grafting before and after canine eruption in patients with unilateral cleft lip and palate.

OBJECTIVE: To determine whether the long axis and eruption of the cleft-adjacent canine affect postoperative outcomes in secondary autogenous bone grafting (SABG). DESIGN: Retrospective longitudinal study. SETTING: Multidisciplinary long-term follow-up at Kagoshima University Hospital. SUBJECTS AND METHODS: Twenty-five patients with complete unilateral cleft lip and palate (11 male, 14 female) were compared between unerupted and erupted groups for canine developmental stage, canine angle, and vertical height at bone grafting at 1 year and more than 4 years after SABG. The interalveolar septal heights at 1 and more than 4 years were evaluated by orthopantomograms. RESULTS: All patients in both groups accomplished dental rehabilitation with orthodontic treatment alone without prosthetic appliances. Although the rate of an acceptable bone bridge tended to be lower in the unerupted group (62.5%) than in the erupted group (88.8%), the difference was not significant (P = .158). The canine angle at bone grafting was significantly different between acceptable (69.2° ± 12.2°) and poor cases (77.3° ± 6.2°) at more than 4 years in the unerupted group (P = .049). The acceptable bone bridge rate might reflect mechanical stress added by natural eruption and orthodontic force. CONCLUSIONS: We suggest that SABG should be planned in accordance with the canine angle, crown and root development, the eruption position of the cleft-adjacent canine, and the timing of added mechanical stress in the alveolar cleft, considering the bone formation in the alveolar cleft.

Three-dimensional analyses of facial soft tissue configuration of Japanese females with jaw deformity--a trial of polygonal view of facial soft tissue deformity in orthognathic patients.

In this study, we evaluated the three-dimensional (3D) soft tissue configuration of Japanese females with/without jaw deformity in order to establish the polygonal view of facial soft tissue deformity three-dimensionally. A polygonal chart was applied to assess the outcomes of orthognathic surgery for patients with mandibular hyperplasia with/without deviation. The study included 20 Japanese females with mandibular hyperplasia with/without deviation. All patients received mandibular setback surgery, and 3D measurements were carried out pre-operation, and at 1, 3 and 6 months postoperatively using a non-contact laser scanning system. Eighteen soft tissue landmarks were set on each 3D image and used to calculate a set of selected parameters. As controls, 20 Japanese females with class I occlusion were included. A polygonal chart was constructed based on the mean and S.D. of the control group. Patients with mandibular protrusion characteristically demonstrated significant variances in the items around the lower face. In asymmetric patients, deviation in the mental area disappeared postoperatively, but a small deviation remained when compared to the controls. The method used in this study seems to be a useful index for diagnosis and as a treatment plan for patients with mandibular hyperplasia with/without deviation.

Three-dimensional analyses of nasal forms after secondary treatment of bilateral cleft lip-nose deformity in comparison to those of healthy young adults.

PURPOSE: To 3-dimensionally analyze outcomes after the secondary treatment of bilateral cleft lip-nose deformity at the Department of Oral and Maxillofacial Surgery, Kagoshima University Hospital, Kagoshima, Japan. PATIENTS AND METHODS: Ten Japanese male young adults with bilateral cleft lip with or without palate (BCL±P) who had undergone definitive nose correction and were followed up for 1 to 4 years were enrolled in this study. Ten unaffected race- and gender-matched young adults were used as controls. All patients underwent secondary correction of the nose by open rhinoplasty through a bilateral reverse-U incision, columellar strut graft, and medial-upward advancement of the nasolabial components with vestibular expansion by use of a free mucosal graft. In 3 patients with an extremely short columella, an inferiorly based small pedicle flap from rim skin rotated into the columellar base was added for columella lengthening. Nasal forms were periodically measured by use of a 3-dimensional noncontact laser scanner. The angular and linear measurements and the curvature of the alar groove arch were compared between patients and control subjects. RESULTS: Comparison of the preoperative and postoperative nasal forms showed significant improvements in the nasal dorsum and tip angles, as well as nasal height. The size of the nasal alar grooves was also increased to the same size range as the control subjects. There were persistent differences between postoperative columellar angle and nasal width in patients and those in the control subjects. CONCLUSIONS: Our surgical procedures can provide an acceptably protruded nasal form for patients with BCL±P without damaging the upper lip tissue, but further improvement to prevent nasal tip overprojection may be useful.

Secondary correction of bilateral cleft lip nose deformity - Clinical and three-dimensional observations on pre- and postoperative outcome.

PURPOSE: The purpose of this study was to describe the clinical and three-dimensional (3D) outcomes following secondary correction of bilateral cleft lip and nose by reverse-U incision, nasal tip cartilage graft, and medial-upward advancement of bilateral nasolabial components with vestibular expansion with a free mucosal graft. PATIENTS AND METHODS: Secondary correction of the bilateral cleft lip and nose deformity was performed on 11 patients with complete bilateral cleft lip, alveolus and palate (BCLP). In four patients with an extremely short columella, an inferiorly based small pedicle flap from rim skin rotating into the columella base was included to elongate the columella length. Pre- and postoperative nasal forms were recorded using photos and 3D data taken serially. RESULTS: The nasal forms and lateral profiles were improved in all patients postoperatively. The pre- and postoperative 3D colour images demonstrated satisfactorily elongated columella length, symmetrically increased nasal tip projection, and enlarged alar groove. No serious complications were observed postoperatively. CONCLUSIONS: Our secondary correction technique of the bilateral cleft lip and nose will provide successful results producing an adequate nasal tip projection and alar forms without damaging the upper lip tissue in patients with BCLP.

3-dimensional analyses of outcomes following secondary treatment of unilateral cleft lip nose deformity.

OBJECTIVE: To analyze the 3-dimensional nasal forms after secondary treatment of unilateral cleft lip nose deformity. PATIENTS AND METHODS: Thirteen Japanese adolescents with severe nose deformity associated with unilateral complete cleft lip with/without palate underwent definitive nose correction at the Department of Oral and Maxillofacial Surgery, Kagoshima University Hospital, and were followed for 1 to 3 years. Twenty healthy Japanese age-matched adolescents were included as controls. All patients were treated by open rhinoplasty through bilateral reverse-U incision and transcolumellar incision, correction of the columellar base with/without septoplasty, columellar strut graft, and medial-upward advancement of nasolabial components with vestibular expansion using a free mucosal graft. Pre- and postoperative nasal forms were measured using a 3-dimensional noncontact laser scanner. Angular and linear measurements, symmetry of the alar groove arch, and deviation of the nasal midline were analyzed. RESULTS: Comparison of pre- with postoperative 3-dimensional nasal forms showed that postoperative nasal height was significantly increased (P < .01) but still shorter than that of controls. The significant preoperative differences in the nasal dorsal angle (P < .05) and bilateral alar groove arch (P < .01) disappeared after the operation. The deviation of the nasal midline was improved in the lower half of the nose (P < .05) postoperatively. There were no serious complications in any patients. CONCLUSIONS: These surgical procedures can provide a symmetric and protruded nasal form, but there remain some differences between postoperative patients and healthy Japanese subjects.

Surgical technique for secondary correction of unilateral cleft lip-nose deformity: clinical and 3-dimensional observations of preoperative and postoperative nasal forms.

PURPOSE: Despite recent developments in cleft surgery, a surgical method for secondary correction of unilateral cleft lip-nose deformity has not yet been established. The purpose of this study was to describe the surgical techniques for secondary correction of unilateral cleft lip-nose deformity with 3-dimensional (3D) observations of preoperative and postoperative nasal forms. PATIENTS AND METHODS: Secondary corrections of unilateral cleft lip-nose deformity were performed on 13 patients with a complete unilateral cleft lip and palate, and these patients were followed up for 1 year to more than 3 years. All patients were treated by open rhinoplasty through a bilateral reverse-U incision and transcolumellar incision, correction of the columella base with/without septoplasty, nasal tip cartilage graft, and medial-upward advancement of nasolabial components with vestibular expansion by free mucosal graft. Preoperative and postoperative nasal forms were observed by use of photos and 3D data obtained serially. RESULTS: The postoperative nasal forms were improved in all patients. The preoperative 3D color images indicated asymmetry of the alar groove and nasal tip visually. The top of the alar groove on the cleft side was dislocated distally and downwardly, resulting in a small snub ala. The postoperative 3D color images showed symmetric nasal forms with the adequately recovered nasal tip projection and the appropriate circle of the nasal ala groove on the cleft side. There were no serious postoperative complications. CONCLUSIONS: Repositioning of the nasalis muscle and sufficient expansion of the nasal vestibule as well as reconstruction of nasal cartilages are important for correction of unilateral cleft lip-nose deformity.