ABSTRACT
It is expected that ionic liquids will be used in the future as electrolytes for electric double layer capacitors, but currently microencapsulation with a conductive or porous shell is required for their fabrication. Here, we succeeded in fabricating a transparently gelled ionic liquid trapped in hemispherical silicone microcup structures just by observing with a scanning electron microscope (SEM), which allows the microencapsulation process to be eliminated and electrical contacts to be formed directly. To see the gelation, small amounts of ionic liquid were exposed to the SEM electron beam on flat aluminum, silicon, silica glass, and silicone rubber. The ionic liquid gelled on all the plates, and a color change to brown was observed on all the plates except for silicone rubber. This change might be caused by reflected and/or secondary electrons from the plates producing isolated carbon. Silicone rubber could remove the isolated carbon due to the large amount of oxygen inside it. Fourier transform infrared spectroscopy revealed that the gelled ionic liquid included a large amount of the original ionic liquid. Moreover, the transparent, flat gelled ionic liquid could also be made into three-layer structures on silicone rubber. Consequently, the present transparent gelation is suitable for silicone rubber-based microdevices.
ABSTRACT
Micro-energy storage, which is convenient for combination with energy harvesting, is known to be realized by microencapsulation with various shell materials, its application is limited to land. Here, we succeeded in fabricating a silicone microcapsule array encapsulating an ionic liquid electrolyte that can store minute power in NaCl solution as well as a minute power generation method. The ArF excimer laser-irradiated silicone rubber underneath silica microspheres was photochemically and periodically swelled by the photodissociation of silicone. Accompanied by the microswellings, the lower molecular weight silicones generated were ejected along a curvature of each the microsphere to enclose the microspheres. After the chemical etching, the silicone microcapsule arrays became hollow. Moreover, each the hollow silicone microcapsule could entrap an ionic liquid in a vacuum. In addition, the silicone microcapsules before and after the encapsulating ionic liquid showed a superhydrophobic or near-superhydrophobic property. As a result, the silicone microcapsule arrays could be confined in a uniform air gap of electrically insulated region in NaCl solution. This means that each the silicone microcapsule encapsulating ionic liquid as electrolytes enables to function as an electric double layer capacitor for micro-power storage, aiming to connect with Internet of Things devices that work under seawater.
ABSTRACT
Phosphorescence spectroscopy of singlet oxygen [=O2(1Δg)] was applied to study the solvation properties of small solute molecule, O2, in ionic liquids. Unlike conventional molecular solvents, the spectral red shift of the O2(1Δg) phosphorescence in ionic liquids from the gas phase was found to depend not only on the refractive index of solvents but also on the vdW volume of anions. This unusual spectral shift of the O2(1Δg) luminescence is interpreted by considering the size of solvation cavities in voids, which is estimated by analyzing the free volume in ionic liquids. These results suggest the potential of the O2(1Δg) phosphorescence spectral shift measurement in the study of molecular-scale voids in ionic liquids.
ABSTRACT
A 193-nm ArF excimer laser was used to induce the photodissociation of Si-O bonds of silicone rubber in order to fabricate a periodic micro/nano-suction cup silicone structure, approximately 1 µm in diameter and 2 µm in height at regular intervals of 2.5 µm. The laser was focused on Al-coated silicone rubber by each silica glass microsphere 2.5 µm in diameter, which covered the entire surface of the silicone rubber. The silicone rubber underneath each microsphere photochemically swelled after laser-ablating the coated Al to limit the diameter of the swelling. Simultaneously, the coated Al was able to adjust the focal point to the surface of the silicone rubber to form a hole approximately 500 nm in diameter, centered at the swollen silicone. The dependences of the thickness of the coated-Al and the laser pulse number are discussed, based on the observations of a scanning electron microscope (SEM) and an atomic force microscope (AFM). The superhydrophobic property of the fabricated micro/nano-suction cup structure was successfully found.
ABSTRACT
Silica (SiO2) optical waveguides have been fabricated on the surface of silicone [(SiO(CH3)2)n] rubber by photochemical modification of silicone rubber into silica with 157 nm F2-laser radiation. The 2 mm thick silicone was exposed through a thin (approximately 0.2 mm) air layer to generate oxygen radicals that chemically assisted in the silica transformation. Silica waveguides were defined in 8-16 microm wide exposure strips by a proximity Cr-on-CaF2 photomask. Optimum laser processing conditions are presented for generating crack-free waveguides with good optical transparency at red (635 nm) and infrared (1550 nm) wavelengths. A propagation loss of approximately 6 dB/cm is reported at the 1550 nm wavelength.
