Recovery of phenolic compounds from peach pomace using conventional solvent extraction and different emerging techniques.

The study compared high-pressure, microwave, ultrasonic, and traditional extraction techniques. The following extraction conditions were implemented: microwave-assisted extraction (MAE) at 900 W power for durations of 30, 60, and 90 s; ultrasonic-assisted extraction (UAE) at 100% amplitude for periods of 5, 10, and 15 min; and high-pressure processing (HPP) at pressures of 400 and 500 MPa for durations of 1, 5, and 10 min. The highest yield in terms of total phenolic content (PC) was obtained in UAE with a value of 45.13 ± 1.09 mg gallic acid equivalent (GAE)/100 g fresh weight (FW). The highest PC content was determined using HPP-500 MPa for 10 min, resulting in 40 mg GAE/100 g, and MAE for 90 s, yielding 34.40 mg GAE/100 g FW. The highest value of antioxidant activity (AA) was obtained by UAE in 51.9% ± 0.71%. The PCs were identified through the utilization of Fourier transform infrared (FTIR) spectroscopy and high-performance liquid chromatography (HPLC). Utilizing multivariate analysis, the construction of chemometric models were executed to predict AA or total PC of the extracts, leveraging the information from IR spectra. The FTIR spectrum revealed bands associated with apigenin, and the application of HPP resulted in concentrations of 5.41 ± 0.25 mg/100 g FW for apigenin and 1.30 ± 0.15 mg/100 g FW for protocatechuic acid. Furthermore, HPLC analysis detected the presence of protocatechuic acid, caffeic acid, p-coumaric acid, and apigenin in both green extraction methods and the classical method. Apigenin emerged as the predominant phenolic compound in peach extracts. The highest concentrations of apigenin, p-coumaric acid, and protocatechuic acid were observed under HPP treatment, measuring 5.41 ± 0.25, 0.21 ± 0.04, and 1.30 ± 0.15 mg/kg FW, respectively.

Assessing the Release of Microplastics and Nanoplastics from Plastic Containers and Reusable Food Pouches: Implications for Human Health.

This study investigated the release of microplastics and nanoplastics from plastic containers and reusable food pouches under different usage scenarios, using DI water and 3% acetic acid as food simulants for aqueous foods and acidic foods. The results indicated that microwave heating caused the highest release of microplastics and nanoplastics into food compared to other usage scenarios, such as refrigeration or room-temperature storage. It was found that some containers could release as many as 4.22 million microplastic and 2.11 billion nanoplastic particles from only one square centimeter of plastic area within 3 min of microwave heating. Refrigeration and room-temperature storage for over six months can also release millions to billions of microplastics and nanoplastics. Additionally, the polyethylene-based food pouch released more particles than polypropylene-based plastic containers. Exposure modeling results suggested that the highest estimated daily intake was 20.3 ng/kg·day for infants drinking microwaved water and 22.1 ng/kg·day for toddlers consuming microwaved dairy products from polypropylene containers. Furthermore, an in vitro study conducted to assess the cell viability showed that the extracted microplastics and nanoplastics released from the plastic container can cause the death of 76.70 and 77.18% of human embryonic kidney cells (HEK293T) at 1000 µg/mL concentration after exposure of 48 and 72 h, respectively.

Improving the Recovery of Phenolic Compounds from Spent Coffee Grounds (SCG) by Environmentally Friendly Extraction Techniques.

The aim of this study was to investigate and compare the effects of different extraction techniques (high hydrostatic pressure-assisted extraction (HHPE), ultrasound-assisted extraction (UAE), and classical solvent extraction (CSE)) on phenolic compounds from spent coffee grounds (SCG). Different HHPE parameters (300, 400 and 500 MPa at 25 °C for 5, 10 and 15 min) and UAE parameters (40%, 50%, and 60% amplitude at 25 °C for 5, 10 and 15 min) were used. These techniques were compared with CSE (at 50 °C for 30 min) according to total phenolic content (TPC), antioxidant activity (AA), high-performance liquid chromatography (HPLC), scanning electron microscopy (SEM), and infrared (IR) spectroscopy. The results showed that eco-friendly techniques increased the TPC and AA compared to CSE and morphological changes were verified by SEM results. Furthermore, chlorogenic and caffeic acid were also quantified by using HPLC. Chlorogenic acid was found as the main phenolic compound in spent coffee grounds (SCG). The highest chlorogenic acid was detected as 85.0 ± 0.6 mg/kg FW with UAE at 60% amplitude for 15 min. In brief, for the extraction of phenolic compounds from waste SCG eco-friendly techniques such as HHPE and/or UAE were more convenient than CSE.