Carnauba (Copernicia prunifera) palm tree biomass as adsorbent for Pb(II) and Cd(II) from water medium.

Plant-based biomass (CFB (carnauba fruit biomass)) obtained from the fruit exocarp of the species Copernicia prunifera (Mill.) H.E. Moore (carnauba) was evaluated for its viability as an adsorbent of potentially toxic metals in aqueous medium. The CFB was characterized by powder X-ray spectroscopy (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and zeta potential to investigate the morphology of the biosorbent and its interaction with water soluble metal ions of Pb and Cd. The biomass presents an amorphous structure, with negative zeta potential (- 2.59 mV), and the presence of functional groups such as O-H, C-O-C, C-H, and C=O. The removal potential of Pb(II) and Cd(II) was performed in a batch system, and monoelement solutions were tested to assess the effects of adsorbent dose and initial metal ion concentration, pH at the point of zero charge (pHPZC), sorption kinetics, and adsorption capacity. The most appropriate adsorbent concentration was 5 g/L, and sorption studies were carried out at pH 5.0 (pHPZC = 4.68), in which the surface of the adsorbent shows negative charges and favors the adsorption of metal ions. Kinetic studies showed that the pseudo-second order model best fit the experimental data, and equilibrium was reached at 120 min of contact time. The experimental sorption capacity (SCexp) for Pb and Cd was around 28 and 34 mg/g, respectively, and six different non-linear isotherm models were used to describe the sorption phenomena, among them, four with 2 parameters, i.e., Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich (DR), respectively, and two with 3 parameters, namely, SIPS and Hill. The non-linear Temkin and Freundlich isotherm models best fit the experimental data for Pb(II) and Cd(II), respectively. According to the Langmuir model, Qmax was 26 mg/g and 58 mg/g for Pb(II) and Cd(II), respectively, indicating the efficiency of CFB as a new alternative to conventional methods for the removal of potentially toxic metals from aqueous medium.

Preparation and characterization of carboxymethyl cashew gum grafted with immobilized antibody for potential biosensor application.

This report details the design of carboxymethylated cashew gum (CG) as a platform for antibody (Ab) immobilization, which can then be used as a biosensor for bacteria detection. The CG was isolated and characterized, followed by conversion to carboxymethyl cashew gum (CMCG). The CMCG film was a viable support for antibody immobilization; it was electrodeposited on gold surface using the cyclic voltammetry technique, applying a potential sweep from -1.0 V to 1.3 V with a scan rate of 50 mV s-1 and 10 scans. The COOH groups on the surface of the film were critical in promoting Ab bonding. The immobilization of the Ab was mediated by protein A (PrA) for recognition of the antigen. Voltammetry studies were used to monitor the antibody immobilization. Finally, the analytical response of the CMCG-PrA-Ab system was evaluated with the chronoamperometry technique and was found to detect Salmonella Typhimurium bacteria rapidly and efficiently.