Inflammatory markers IL-1ß and RANK-L assessment after non-vital bleaching: A 3-month follow-up.

OBJECTIVE: This study assessed IL-1ß and RANK-L levels in vivo and color stability of non-vital teeth bleached using hydrogen (35%) and carbamide (37%) peroxides 3 months after treatment. MATERIALS AND METHODS: Fifty teeth were randomly divided into two groups(n = 25):35% hydrogen peroxide (HP) or 37% carbamide peroxide (CP). Four sessions of intracoronal walking-bleach procedure were performed. IL-1ß and RANK-L levels were assessed from gingival crevicular fluid samples (from three vestibular and three palatines sites) at eight different time-points: at the beginning of the study (baseline), after four sessions of intracanal bleaching, and at 1 week, 1 month, and 3 months posttreatment. The color variations were visually detected using Vita bleach shade guide (ΔSGU). RESULTS: Significant increases of IL-1ß and RANK-L levels were detected at all time-points (all P < .05) when comparing each time-point to baseline, and a high correlation (>0.8-Spearman) between variables. According the ΔSGU values, a color change of five for HP and four for CP were detected. CONCLUSIONS: Non-vital walking bleach technique promotes an increase in IL-1ß and RANKL levels in periodontal tissues and also, it is maintained until the third-month posttreatment. CLINICAL SIGNIFICANCE: The internal whitening of teeth increases the levels of cytokines associated with inflammation and bone resorption 3 months after the whitening procedure is finished; this should warn of possible harmful effects of this whitening technique.

Sealing of restorations with marginal defects does not affect their longevity.

PURPOSE: To evaluate sealed amalgam and resin-based composite restorations after 12 years to determine whether sealing minor defects (micro-repairs) enhanced the longevity of restorations. METHODS: 34 subjects aged 18-80 were recruited. This sample group underwent 137 restorations, including 51 resin-based composite (RC) and 86 amalgam (AM) restorations. Existing restorations with localized, marginal defects were assigned to one of two groups: (a) the Sealing group (n=48, 27 AM; 21 RC) or (b) the Control group (n=89, 59 AM; 30 RC). The quality of each restoration was scored according to the modified USPHS criteria by two examiners at the beginning of the study and after 1-5, 10, and 12 years. Kaplan Meier survival curves were created and a Cox regression was applied to investigate survival variables. Mantel Cox, Wilcoxon, and Friedman tests were performed for comparisons within groups. RESULTS: After 12 years, no statistically significant differences were observed for the variables "restorative material" (P= 0.538) or "sealing yes/no" (P= 0.136) with respect to the longevity of the restorations. All groups behaved similarly with regard to marginal adaptation, secondary caries, and tooth sensitivity (P≥ 0.05). Cumulatively, after a 12-year observation period, sealing minor restoration defects did not affect the longevity of the restorations. CLINICAL SIGNIFICANCE: Sealing minor marginal defects for resin composites or amalgam restorations did not affect their longevity. This intervention may be considered over-treatment for patients with low-to-medium risks for developing dental caries.

Enhanced bioactive properties of BiodentineTM modified with bioactive glass nanoparticles.

OBJECTIVE: To prepare nanocomposite cements based on the incorporation of bioactive glass nanoparticles (nBGs) into BiodentineTM (BD, Septodent, Saint-Maur-des-Fosses Cedex, France) and to assess their bioactive properties. MATERIAL AND METHODS: nBGs were synthesised by the sol-gel method. BD nanocomposites (nBG/BD) were prepared with 1 and 2% nBGs by weight; unmodified BD and GC Fuji IX (GIC, GC Corporation, Tokyo, Japan) were used as references. The in vitro ability of the materials to induce apatite formation was assessed in SBF by X-ray diffraction (XRD), attenuated total reflectance with Fourier transform infrared spectroscopy (ATR-FTIR), and scanning electron microscopy (SEM) with energy dispersive X-ray (EDX) analysis. BD and nBG/BD were also applied to dentine discs for seven days; the morphology and elemental composition of the dentine-cement interface were analysed using SEM-EDX. RESULTS: One and two percent nBG/BD composites accelerated apatite formation on the disc surface after short-term immersion in SBF. Apatite was detected on the nBG/BD nanocomposites after three days, compared with seven days for unmodified BD. No apatite formation was detected on the GIC surface. nBG/BD formed a wider interfacial area with dentine than BD, showing blockage of dentine tubules and Si incorporation, suggesting intratubular precipitation. CONCLUSIONS: The incorporation of nBGs into BD improves its in vitro bioactivity, accelerating the formation of a crystalline apatite layer on its surface after immersion in SBF. Compared with unmodified BD, nBG/BD showed a wider interfacial area with greater Si incorporation and intratubular precipitation of deposits when immersed in SBF.

A multipurpose natural and renewable polymer in medical applications: Bacterial cellulose.

Bacterial cellulose (BC) produced by some bacteria, among them Gluconacetobacter xylinum, which secrets an abundant 3D networks fibrils, represents an interesting emerging biocompatible nanomaterial. Since its discovery BC has shown tremendous potential in a wide range of biomedical applications, such as artificial skin, artificial blood vessels and microvessels, wound dressing, among others. BC can be easily manipulated to improve its properties and/or functionalities resulting in several BC based nanocomposites. As example BC/collagen, BC/gelatin, BC/Fibroin, BC/Chitosan, etc. Thus, the aim of this review is to discuss about the applicability in biomedicine by demonstrating a variety of forms of this biopolymer highlighting in detail some qualities of bacterial cellulose. Therefore, various biomedical applications ranging from implants and scaffolds, carriers for drug delivery, wound-dressing materials, etc. that were reported until date will be presented.

Does refurbishing composites lead to short-term effects or long-lasting improvement?

PURPOSE: To evaluate the clinical performance of refurbished resin composite restorations compared to untreated (negative control) restorations over a period of 10 years. METHODS: 26 subjects (having a total of 52 composite restorations) were recruited. All restorations in the refurbished group showed clinical features rated bravo according to modified USPHS criteria. Untreated restorations were those that had been deemed acceptable (alpha or bravo rated); these were used as controls. Two examiners performed assessments at baseline and during the 5th and 10th years after the intervention. Wilcoxon tests were performed for within-group comparisons, Friedman tests were used for multiple within-group comparisons, and Mann Whitney tests were used for between-groups comparisons. Kaplan-Meier survival curves were calculated, and the Mantel-Cox test was used to compare curves. P < 0.05 was considered statistically significant. RESULTS: In both groups, 10-year scores were significantly different from baseline scores in all clinical parameters except secondary caries. There were no statistically significant differences in the survival analysis of groups (log-rank test, P = 0.376). Refurbishing treatment improved the anatomy, roughness, luster, and marginal adaptation of restorations with a short-term effect, with most properties rated acceptable after 10 years of clinical service. The clinical characteristics were similar for all groups at the 10th year.

Esthetic dental anomalies as motive for bullying in schoolchildren.

Facial esthetics, including oral esthetics, can severely affect children's quality-of-life, causing physical, social and psychological impairment. Children and adolescents with esthetic-related dental malformations are potential targets for bullies. This study was aimed to present and discuss patients who suffered from bullying at school and family environment due to esthetic-related teeth anomalies. Providing an adequate esthetic dental treatment is an important step in their rehabilitation when the lack of esthetic is the main source of bullying. After dental treatment, we noted significant improvement in self-esteem, self-confidence, socialization and academic performance of all patients and improvement in parental satisfaction regarding the appearance of their children. It is imperative that both family and school care providers be constantly alert about bullying in order to prevent or interrupt aggressive and discriminatory practices against children and adolescents. Clearly, dental anomalies may be a motive for bullying.

Dental fluorescence: potential forensic use.

In cases of identification of bones, skeletal segments or isolated bones, searching for biotypologic diagnostic data to estimate an individual's age enables comparing these data with those of missing individuals. Enamel, dentin and pulp undergo remarkable changes during an individual's life. The enamel becomes more mineralized, smoother and thinner, and deteriorates because of physiological and pathological factors. Dental pulp decreases in volume due to the deposition of secondary dentin; thus, the dentin becomes thicker with time. In natural teeth, the fluorescence phenomenon occurs in dentin and enamel and changes in those tissues may alter the expression of the natural tooth color. The aim of this study was to assess the correlation between age and teeth fluorescence for individuals from different age groups. The sample consisted of 66 randomly selected Brazilians of both genders aged 7-63 years old. They were divided into 6 groups: Group 1 - aged 7-12 years, Group 2 - aged 13-20 years, Group 3 - aged 21-30 years, Group 4 - aged 31-40 years, Group 5 - aged 41-50 years and Group 6 - aged between 51 and 63 years. Upper right or left central incisors were used for the study. Restored and aesthetic rehabilitated teeth were excluded from the sample. The measurement of tooth fluorescence was carried out via computer analysis of digital images using the software ScanWhite DMC/Darwin Systems - Brazil. It was observed that dental fluorescence decreases when comparing the age groups 21-30, 31-40, 41-50 and 51-63 years. The results also showed that there is a statistically significant difference between the groups 41-50 years and 21-30 years (p=0.005) and also among the group 51-63 years and all other groups (p<0.005). It can be concluded that dental fluorescence is correlated with age and has a similar and stable behavior from 7 to 20 years of age. It reaches its maximum expected value at the age of 26.5 years and thereafter decreases.

Dentin hypersensitivity after teeth bleaching with in-office systems. Randomized clinical trial.

PURPOSE: To comparatively and prospectively compare in a randomized clinical trial, dentin hypersensitivity after treatment with three in-office bleaching systems, based on hydrogen peroxide at different concentrations, with and without light source activation. METHODS: 88 individuals were included according to inclusion and exclusion criteria. Subjects were randomly divided into the following three treatment groups: Group 1 was treated with three 15-minute applications of hydrogen peroxide at 15% with titanium dioxide (Lase Peroxide Lite) that was light-activated (Light Plus Whitening Lase) with five cycles of 1 minute and 30 seconds each cycle, giving a total treatment time of 45 minutes; Group 2 was treated with three 10-minute applications of hydrogen peroxide at 35% (Lase Peroxide Sensy), activated by light (LPWL) same activation cycles than Group 1, with a total treatment time of 30 minutes; Group 3 was treated with only one application for 45 minutes of hydrogen peroxide at 35% (Whitegold Office) without light activation. Each subject underwent one session of bleaching on the anterior teeth according to the manufacturers' instructions. Dentin sensitivity was recorded with a visual analogue scale (VAS) at baseline, immediately after, and at 7 and 30 days after treatment using a stimulus of an evaporative blowing triple syringe for 3 seconds on the upper central incisors from a distance of 1 cm. A Kruskal-Wallis test followed by Mann-Whitney test was performed for statistical analysis. RESULTS: All groups showed increased sensitivity immediately after treatment. Group 1 displayed less changes relative to baseline with no significant differences (P = 0.104). At 7 and 30 days after treatment, a comparison of VAS values indicated no significant differences between all groups (P = 0.598 and 0.489, respectively).

In vitro study of fracture load and fracture pattern of ceramic crowns: a finite element and fractography analysis.

PURPOSE: This in vitro study investigated the null hypothesis that metal-free crowns induce fracture loads and mechanical behavior similar to metal ceramic systems and to study the fracture pattern of ceramic crowns under compressive loads using finite element and fractography analyses. MATERIALS AND METHODS: Six groups (n = 8) with crowns from different systems were compared: conventional metal ceramic (Noritake) (CMC); modified metal ceramic (Noritake) (MMC); lithium disilicate-reinforced ceramic (IPS Empress II) (EMP); leucite-reinforced ceramic (Cergogold) (CERG); leucite fluoride-apatite reinforced ceramic (IPS d.Sign) (SIGN); and polymer crowns (Targis) (TARG). Standardized crown preparations were performed on bovine roots containing NiCr metal dowels and resin cores. Crowns were fabricated using the ceramics listed, cemented with dual-cure resin cement, and submitted to compressive loads in a mechanical testing machine at a 0.5-mm/min crosshead speed. Data were submitted to one-way ANOVA and Tukey tests, and fractured specimens were visually inspected under a stereomicroscope (20×) to determine the type of fracture. Maximum principal stress (MPS) distributions were calculated using finite element analysis, and fracture origin and the correlation with the fracture type were determined using fractography. RESULTS: Mean values of fracture resistance (N) for all groups were: CMC: 1383 ± 298 (a); MMC: 1691 ± 236 (a); EMP: 657 ± 153 (b); CERG: 546 ± 149 (bc); SIGN: 443 ± 126 (c); TARG: 749 ± 113 (b). Statistical results showed significant differences among groups (p < 0.05) represented by different lowercase letters. Metal ceramic crowns presented fracture loads significantly higher than the others. Ceramic specimens presented high incidence of fractures involving either the core or the tooth, and all fractures of polymer crown specimens involved the tooth in a catastrophic way. Based on stress and fractographic analyses it was determined that fracture occurred from the occlusal to the cervical direction. CONCLUSIONS: Within the limitations of this study, the results indicated that the use of ceramic and polymer crowns without a core reinforcement should be carefully evaluated before clinical use due to the high incidence of failure with tooth involvement. This mainly occurred for the polymer crown group, although the fracture load was higher than normal occlusal forces. High tensile stress concentrations were found around and between the occlusal loading points. Fractographic analysis indicated fracture originating from the load point and propagating from the occlusal surface toward the cervical area, which is the opposite direction of that observed in clinical situations.

Direct esthetic restorations based on translucency and opacity of composite resins.

UNLABELLED: Light dynamics is a relevant phenomenon with respect to esthetic restorations, as incorrect analysis of the optical behavior of natural dentition may lead to potential clinical failures. The nature of incident light plays a major role in determining the amount of light transmission or reflection, and how an object is perceived depends on the nature of the light source. Natural teeth demonstrate translucency, opalescence, and fluorescence, all of which must be replicated by restorative materials in order to achieve clinical success. Translucency is the intermediary between complete opacity and complete transparency, making its analysis highly subjective. In nature, the translucency of dental enamel varies from tooth to tooth, and from individual to individual. Therefore, four important factors must be considered when appraising translucency. Presence or absence of color, thickness of the enamel, degree of translucency, and surface texture are essential components when determining translucency. State-of-the-art resin composites provide varying shades and opacities that deliver a more faithful reproduction of the chromaticity and translucency/opacity of enamel and dentin. This enables the attainment of individualized and customized composite restorations. The objective of this article is to provide a review of the phenomena of translucency and opacity in the natural dentition and composite resins, under the scope of optics, and to describe how to implement these concepts in the clinical setting. CLINICAL SIGNIFICANCE: Choosing composite resins, based on optical properties alone, in order to mimic the properties of natural tooth structures, does not necessarily provide a satisfactory esthetic outcome. In many instances, failure ensues from incorrect analysis of the optical behaviors of the natural dentition as well as the improper use of restorative materials. Therefore, it is necessary to implement a technique that enables a restorative material to be utilized to its full potential to correctly replicate the natural teeth.

The perception of smile attractiveness.

OBJECTIVES: To evaluate the attractiveness of a smile according to variations from esthetic norms, photographic framing, and the order of the presentation of photographs. MATERIALS AND METHODS: A photograph of an individual was selected and digitally manipulated to create the following smiles: an ideal control smile (I), a smile with diastema (D1), a smile with midline deviation (LM3), a smile with deviation from the long axes of the lateral incisors (10D), and a smile with an inverted smile arc (LSRV). The manipulated photographs were developed in framings of the face and of the mouth and evaluated by 20 laypeople. For half the evaluators, the presentation started with facial photographs and, for the other half, the presentation began with the mouth shots. Evaluators were asked to rank the photographs from the least to the most attractive; then, each photograph was awarded a mark (scale of 0.0 to 10.0). RESULTS: In both presentations, the smiles I, LM3, 10D, and LSRV received favorable ratings, whereas the D1 smile got poor ratings. The photographic framings used (face vs mouth) and the order of presentation of the photographs did not influence the rankings. CONCLUSION: The absence of variations from beauty norms of a smile has a positive impact on its esthetic perception, but variations from the norms do not necessarily result in reduced attractiveness.

Correção da estética gengival e dentária: interação entre Periodontia e Prótese / Correction of the dental and gingival aesthetic: Periodontology and Prosthodontics interaction

A estética do sorriso representa motivo de grande interesse durante o planejamento reabilitador. Nas situações clínicas de sorriso gengival, onde as coroas clínicas dos dentes anteriores apresentam-se encurtadas, torna-se imprescindível a correção do contorno gengival previamente à reabilitação. Portanto, um tratamento integrado, onde uma cirurgia plástica periodontal seja realizada em uma primeira etapa clínica, pode ser indicado quando da abordagem reabilitadora do paciente com sorriso gengival. Este artigo descreve a transformação estética de um sorriso gengival, com presença de diastemas e alterações de coloração dentária, por meio da associação interdisciplinar entre as especialidades de Periodontia e Prótese Dental.