Direct spectral analysis and determination of high content of carcinogenic bromine in bread using UV pulsed laser induced breakdown spectroscopy.

Laser induced breakdown spectroscopy (LIBS) was applied for the detection of carcinogenic elements like bromine in four representative brands of loaf bread samples and the measured bromine concentrations were 352, 157, 451, and 311 ppm, using Br I (827.2 nm) atomic transition line as the finger print atomic transition. Our LIBS system is equipped with a pulsed laser of wavelength 266 nm with energy 25 mJ pulse(-1), 8 ns pulse duration, 20 Hz repetition rate, and a gated ICCD camera. The LIBS system was calibrated with the standards of known concentrations in the sample (bread) matrix and such plot is linear in 20-500 ppm range. The capability of our system in terms of limit of detection and relative accuracy with respect to the standard inductively coupled plasma mass spectrometry (ICPMS) technique was evaluated and these values were 5.09 ppm and 0.01-0.05, respectively, which ensures the applicability of our system for Br trace level detection, and LIBS results are in excellent agreement with that of ICPMS results.

Determination of carcinogenic fluorine in cigarettes using pulsed UV laser-induced breakdown spectroscopy.

A spectrometer based on pulsed UV laser-induced breakdown spectroscopy (LIBS) and a highly sensitive intensified charged coupled device camera was developed to determine the carcinogenic substances like fluorine in various brands of cigarettes available commercially. In order to achieve the high sensitivity required for the determination of trace amounts of fluoride in cigarettes and eventually the best limit of detection, the experimental parameters (influence of incident laser energy on LIBS signal intensity and time response of plasma emission) were optimized. In addition, the plasma parameters like electron temperature and electron density were evaluated using Boltzman's plot for cigarette tobacco for the first time. To the best of our knowledge, LIBS has never been applied to determine the fluorine concentration in cigarettes. Along with the detection of fluorine, other trace metals like Ba, Ca, Ni, Cu, and Na were also detected in cigarettes. For determination of the concentration of fluorine, calibration curve was drawn by preparing standard samples in various fluoride concentrations in tobacco matrix. The concentration of fluorine in different cigarette tobacco samples was 234, 317, 341, and 360 ppm respectively, which is considered to be much higher than the safe permissible limits. The limit of detection of our LIBS spectrometer was 14 ppm for fluorine.