Quantized Grain Boundary States Promote Nanoparticle Alignment During Imperfect Oriented Attachment.

Oriented attachment (OA) has become a well-recognized mechanism for the growth of metal, ceramic, and biomineral crystals. While many computational and experimental studies of OA have shown that particles can attach with some misorientation then rotate to remove adjoining grain boundaries, the underlying atomistic pathways for this "imperfect OA" process remain the subject of debate. In this study, molecular dynamics and in situ transmission electron microscopy (TEM) are used to probe the crystallographic evolution of up to 30 gold nanoparticles during aggregation. It is found that Imperfect OA occurs because 1) grain boundaries become quantized when their size is comparable to the separation between constituent dislocations and 2) kinetic barriers associated with the glide of grain boundary dislocations are small. In support of these findings, TEM experiments show the formation of a single crystal aggregate after annealing nine initially misoriented, agglomerated particles with evidence of dislocation activity and twin formation during particle/grain alignment. These observations motivate future work on assembled nanocrystals with tailored defects and call for a revision of Read-Shockley models for grain boundary energies in nanocrystalline materials.

Ultralight Conductive Silver Nanowire Aerogels.

Low-density metal foams have many potential applications in electronics, energy storage, catalytic supports, fuel cells, sensors, and medical devices. Here, we report a new method for fabricating ultralight, conductive silver aerogel monoliths with predictable densities using silver nanowires. Silver nanowire building blocks were prepared by polyol synthesis and purified by selective precipitation. Silver aerogels were produced by freeze-casting nanowire aqueous suspensions followed by thermal sintering to weld the nanowire junctions. As-prepared silver aerogels have unique anisotropic microporous structures, with density precisely controlled by the nanowire concentration, down to 4.8 mg/cm3 and an electrical conductivity up to 51 000 S/m. Mechanical studies show that silver nanowire aerogels exhibit "elastic stiffening" behavior with a Young's modulus up to 16 800 Pa.

Laser damage mechanisms in conductive widegap semiconductor films.

Laser damage mechanisms of two conductive wide-bandgap semiconductor films - indium tin oxide (ITO) and silicon doped GaN (Si:GaN) were studied via microscopy, spectroscopy, photoluminescence (PL), and elemental analysis. Nanosecond laser pulse exposures with a laser photon energy (1.03 eV, 1064 nm) smaller than the conductive films bandgaps were applied and radically different film damage morphologies were produced. The laser damaged ITO film exhibited deterministic features of thermal degradation. In contrast, laser damage in the Si:GaN film resulted in highly localized eruptions originating at interfaces. For ITO, thermally driven damage was related to free carrier absorption and, for GaN, carbon complexes were proposed as potential damage precursors or markers.

On-demand and location selective particle assembly via electrophoretic deposition for fabricating structures with particle-to-particle precision.

Programmable positioning of 2 µm polystyrene (PS) beads with single particle precision and location selective, "on-demand", particle deposition was demonstrated by utilizing patterned electrodes and electrophoretic deposition (EPD). An electrode with differently sized hole patterns, from 0.5 to 5 µm, was used to illustrate the discriminatory particle deposition events based on the voltage and particle-to-hole size ratio. With decreasing patterned hole size, a larger electric field was required for a particle deposition event to occur in that hole. For the 5 µm hole, particle deposition began to occur at 10 V/cm where as an electric field of 15 V/cm was required for particles to begin depositing in the 2 µm holes. The likelihood of particle depositions continued to increase for smaller sized holes as the electric field increased. Eventually, a monolayer of particles began to form at approximately 20 V/cm. In essence, a voltage threshold was found for each hole pattern of different sizes, allowing fine adjustments in pattern hole size and voltage to control when a particle deposition event took place, even with the patterns on the same electrode. This phenomenon opens a route toward controlled, multimaterial deposition and assembly onto substrates without repatterning of the electrode or complicated surface modification of the particles. An analytical approach using the theories for electrophoresis and dielectrophoresis found the former to be the dominating force for depositing a particle into a patterned hole. Ebeam lithography was used to pattern spherical holes in precise configurations onto electrode surfaces, where each hole accompanied a polystyrene (PS) particle placement and attachment during EPD. The versatility of e-beam lithography was utilized to create arbitrary pattern configurations to fabricate particle assemblies of limitless configurations, enabling fabrication of unique materials assemblies and interfaces.

High Surface Area, sp(2)-Cross-Linked Three-Dimensional Graphene Monoliths.

Developing three-dimensional (3D) graphene assemblies with properties similar to those individual graphene sheets is a promising strategy for graphene-based electrodes. Typically, the synthesis of 3D graphene assemblies relies on van der Waals forces for holding the graphene sheets together, resulting in bulk properties that do not reflect those reported for individual graphene sheets. Here, we report the use of sol-gel chemistry to introduce chemical bonding between the graphene sheets and control the bulk properties of graphene-based aerogels. Adjusting synthetic parameters allows a wide range of control over surface area, pore volume, and pore size, as well as the nature of the chemical cross-links (sp(2) vs sp(3)). The bulk properties of the graphene-based aerogels represent a significant step toward realizing the properties of individual graphene sheets in a 3D assembly with surface areas approaching the theoretical value of an individual sheet.

Synthesis of graphene aerogel with high electrical conductivity.

We report the synthesis of ultra-low-density three-dimensional macroassemblies of graphene sheets that exhibit high electrical conductivities and large internal surface areas. These materials are prepared as monolithic solids from suspensions of single-layer graphene oxide in which organic sol-gel chemistry is used to cross-link the individual sheets. The resulting gels are supercritically dried and then thermally reduced to yield graphene aerogels with densities approaching 10 mg/cm(3). In contrast to methods that utilize physical cross-links between GO, this approach provides covalent carbon bonding between the graphene sheets. These graphene aerogels exhibit an improvement in bulk electrical conductivity of more than 2 orders of magnitude (∼1 × 10(2) S/m) compared to graphene assemblies with physical cross-links alone (∼5 × 10(-1) S/m). The graphene aerogels also possess large surface areas (584 m(2)/g) and pore volumes (2.96 cm(3)/g), making these materials viable candidates for use in energy storage, catalysis, and sensing applications.

Effects of chromophore orientation and molecule conformation on surface-enhanced Raman scattering studied with alkanoic acids and colloidal silver nanoparticles.

Experimental studies have been carried out to gain a better understanding of the effects of chromophore orientation and molecular conformation on surface-enhanced Raman scattering (SERS) based on metal nanostructures. A series of alkanoic acids that contain a phenyl ring separated by methylene groups from the carboxylic acid, including phenylacetic acid, 3-phenylpropionic acid, 4-phenylbutyric acid, 5-phenylvaleric acid, and 6-phenylhexanoic acid, was investigated as model molecules with colloidal silver nanoparticles as SERS substrates. As the number of methylene groups increases, the molecules display an interesting zigzag intensity pattern of the phenyl ring bending mode around 1000 cm(-1) as well as a trend of appearance and disappearance of either the degenerate ring breathing mode or C[Double Bond]O vibrational mode near 1585 and 1630 cm(-1), respectively. Molecules containing an odd number of methylene units display a higher ring bending intensity and degenerate ring breathing mode and are suggested to have a trans conformation on the particle surface. Molecules with an even number of methylene units show a C[Double Bond]O vibrational mode and weaker ring bending in their SERS spectra and are suggested to have a gauche conformation on the silver nanoparticle surface. The different conformation is attributed to the varying interactions of the carboxylic group or the phenyl ring pi electrons with the silver surface. The SERS intensity was found to change little as the length between the phenyl ring and the carboxylic group was increased by adding CH(2) spacers. This is possibly because the effective distance between the phenyl ring and the silver surface does not change much with increasing number of CH(2) spacers as a result of changes in molecular conformation and variations in the phenyl ring orientation with CH(2) addition. The insight gained from this study is important for understanding SERS of complex molecules for which chromophore orientation and molecular conformation must be taken into careful consideration.

Synthesis, characterization, and tunable optical properties of hollow gold nanospheres.

Nearly monodisperse hollow gold nanospheres (HGNs) with tunable interior and exterior diameters have been synthesized by sacrificial galvanic replacement of cobalt nanoparticles. It is possible to tune the peak of the surface plasmon band absorption between 550 and 820 nm by carefully controlling particle size and wall thickness. Cobalt particle size is tunable by simultaneously changing the concentration of sodium borohydride and sodium citrate, the reducing and capping agent, respectively. The thickness of the gold shell can be varied by carefully controlling the addition of gold salt. With successful demonstration of ensemble as well as single HGN surface-enhanced Raman scattering, these HGNs have shown great potential for chemical and biological sensing applications, especially those requiring nanostructures with near-IR absorption.