ABSTRACT
In this work, heterostructures of coupled TiO2@MoS2with different phases of MoS2were synthesized via hydrothermal technique. The prepared materials were thoroughly characterized using various techniques, including XRD, SEM, transmission electron microscopy, Brunauer-Emmet-Teller, XPS, Zeta potential and UV-vis spectroscopy. The optimized nanocomposites were tested for the photocatalytic degradation of methyl Orange (MO) under visible light as well as the adsorption of Rhodamine b (RhB) and methelene blue (MB) dyes. The TiO2@1T/2H-MoS2heterostructures exhibited a narrow bandgap compared to the other studied nanomaterials. A remarkable photodegradation efficiency of TiO2@1T/2H-MoS2was observed, which completely degraded 20 ppm of MO after 60 min with high stability over four successive cycles. This can be assigned to the formation of unique heterostructures with aligned energy bands between MoS2nanosheets and TiO2nanobelts. The formation of these novel interfaces promoted the electron transfer and increased the separation efficiency of carriers, resulting in high photocatalytic degradation. Furthermore, the adsorption efficiency of TiO2@1T/2H-MoS2was unique, 20 ppm solutions of RhB and MB were removed after 1 and 2 min, respectively. The superior adsorption performance of the TiO2@1T/2H-MoS2can be attributed to its high surface area (279.9 m2g-1) and the rich concentration of active sites. The kinetics and the isothermal analysis revealed that the TiO2@1T/2H MoS2heterstructures have maximum adsorption capacity of 1200 and 970 mg g-1for RhB and MB, respectively. This study provides a powerful way for designing an effective photocatalyst and adsorbent TiO2-based nanocomposites for water remediation.
ABSTRACT
Molybdenum disulfide (MoS2) has recently been considered as an effective material for potential photocatalytic applications; however, its photocatalytic activity was limited due to the low density of active sites. In this work, MoS2 Quantum dots (QDs) were synthesized via the ultrasonication technique to construct heterostructure with SnS2 nanosheets (SnS2@MoS2 QDs) and the prepared materials were tested for photocatalytic applications for Methylene blue (MB). Pristine SnS2 and SnS2@MoS2 QDs nanocomposite were analyzed by XRD, TEM, PL, and Uv-Vis. Both SnS2 and SnS2@MoS2 QDs exhibited a single trigonal phase with the P-3m1 space group. The TEM analysis confirmed the coupling between the pristine SnS2 and SnS2@MoS2 QDs. The results of photocatalytic activity toward MB indicated that SnS2@MoS2 QDs material exhibits much superior photocatalytic performance compared to pristine SnS2. The excellent photodegradation performance of SnS2@MoS2 QDs is due in the main to the formation of heterojunction between SnS2 and MoS2 QDs with narrow bandgap formation, which results in a facile carriers transfer and thus high photocatalytic efficiency. A representative mechanism of the photodegradation for SnS2@MoS2 QDs photocatalyst was proposed. Such an ultrasonic technique is capable of producing small metallic particle size that can be used to construct new heterostructures for water remediation applications.
ABSTRACT
Supercapacitors have been the key target as energy storage devices for modern technology that need fast charging. Although supercapacitors have large power density, modifications should be done to manufacture electrodes with high energy density, longer stability, and simple device structure. The polymorph MoS2 has been one of the targeted materials for supercapacitor electrodes. However, it was hard to tune its phase and stability to achieve the maximum possible efficiency. Herein, we demonstrate the effect of the three main phases of MoS2 (the stable semiconductor 2H, the metastable semiconductor 3R, and the metastable metallic 1T) on the capacitance performance. The effect of the cation intercalation on the capacitance performance was also studied in Li2SO4, Na2SO4, and K2SO4 electrolytes. The performance of the electrode containing the metallic 1T outperforms those of the 2H and 3R phases in all electrolytes, with the order 1T > 3R > 2H. The 1T/2H phase showed a maximum performance in the K2SO4 electrolyte with a specific capacitance of 590 F g-1 at a scan rate of 5 mV s-1. MoS2 showed a good performance in both positive and negative potential windows allowing the fabrication of symmetric supercapacitor devices. The 1T MoS2 symmetric device showed a power density of 225 W/kg with an energy density of 4.19 Wh/kg. The capacitance retention was 82% after 1000 cycles, which is an outstanding performance for the metastable 1T-containing electrode.
