ß-Galactosidase Langmuir Monolayer at Air/X-gal Subphase Interface.

This article investigates the surface chemistry properties of the ß-galactosidase monolayer at the air-subphase interface at the vicinity of its substrate, X-gal. We have demonstrated that the ß-galactosidase in the monolayer form remained active and performed hydrolysis of the X-gal in the subphase. We investigated the ß-galactosidase Langmuir monolayer in absence and presence of X-gal in the subphase of varying concentration of X-gal with the sodium chloride solution. It was found that the limiting molecular area as well as the collapse surface pressure kept on decreasing with the increasing concentration of X-gal. In accordance to the data obtained from the isotherm it was also found that ß-galactosidase forms a stable monolayer that does not aggregate at the air-subphase interface. The stability of the monolayer at the air-subphase interface was studied by using compression-decompression cycles with and without X-gal at varying concentration and different surface pressures. The infrared reflection-absorption spectroscopy (IRRAS) and Brewster angle microscopy (BAM) of ß-galactosidase Langmuir monolayer was also investigated for pure and mixed ß-galactosidase at the air-subphase.

Surface chemistry and spectroscopy of the ß-galactosidase Langmuir monolayer.

The changes of interfacial properties of ß-galactosidase introduced into different pH environments are investigated through surface chemistry and in situ spectroscopy. Conditions for an optimal Langmuir monolayer formation were firstly obtained by varying the subphase salt concentration and the surface-pressure area isotherm was used to extrapolate the limiting molecular area of the enzyme monolayer to be around 42,000 Å(2) molecule(-1). Surface pressure stability measurements held at 20 mN/m for 90 min along with compression-decompression cycles revealed no aggregate formation at the air-water interface. Consistent with the data obtained from the isotherm, in situ UV-Vis and fluorescence spectroscopy shows a steep rise in absorbance and photoluminescence intensity correlating to with a switch from a liquid-expanded to a liquid-condensed phase. A decrease in subphase pH increased the electrostatic repulsion as the enzyme was protonated, leading to an expanded monolayer. Infrared absorption-reflection spectroscopy demonstrates that the enzyme adopts mainly ß-sheet conformation at the air-water interface before and during the compression.

Strong and selective adsorption of lysozyme on graphene oxide.

Biosensing methods and devices using graphene oxide (GO) have recently been explored for detection and quantification of specific biomolecules from body fluid samples, such as saliva, milk, urine, and serum. For a practical diagnostics application, any sensing system must show an absence of nonselective detection of abundant proteins in the fluid matrix. Because lysozyme is an abundant protein in these body fluids (e.g., around 21.4 and 7 µg/mL of lysozyme is found in human milk and saliva from healthy individuals, and more than 15 or even 100 µg/mL in patients suffering from leukemia, renal disease, and sarcoidosis), it may interfere with detections and quantification if it has strong interaction with GO. Therefore, one fundamental question that needs to be addressed before any development of GO based diagnostics method is how GO interacts with lysozyme. In this study, GO has demonstrated a strong interaction with lysozyme. This interaction is so strong that we are able to subsequently eliminate and separate lysozyme from aqueous solution onto the surface of GO. Furthermore, the strong electrostatic interaction also renders the selective adsorption of lysozyme on GO from a mixture of binary and ternary proteins. This selectivity is confirmed by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), fluorescence spectroscopy, and UV-vis absorption spectroscopy.

Human insulin fibril-assisted synthesis of fluorescent gold nanoclusters in alkaline media under physiological temperature.

Fluorescent insulin fibrils gold nanoclusters (Au NCs) have been synthesized through the reduction of gold by human insulin in fibrillated form. Likewise, nanocluster formation has been regulated by insulin, working as a protein-based template. Environment- and surface-controlled experiments have shown the optimized synthesis conditions is comprised of a pure aqueous alkaline solvent for insulin under constant heat at physiological temperature (37°C) prior to addition of the Au precursor (HAuCl4), followed by subsequent heating (37°C) and vigorous stirring after the addition of HAuCl4 until the completion of the synthetic approach. Microscopy experiments detected the presence of primordial fibril structures in samples of heated human insulin in the alkaline medium prior to addition of HAuCl4, while encountering more developed insulin fibrils in the terminal production of Au NCs. This investigation provides insight to the development of a novel synthesis of Au NCs in the alkaline medium, while providing a graphical description of the environmental and surface-dependent effects that were presented in the synthesis of human insulin nanoclusters. The study provides pertinent information for future synthetic procedures, as the protein state of several protein-nanoparticle systems may reflect on the results that were obtained herein.

Surface chemistry and spectroscopy of human insulin Langmuir monolayer.

The human insulin (HI) protein was examined to elucidate its structure at the air-water interface. Optimal experimental conditions were determined to prepare a homogeneous and stable human insulin (HI) Langmuir monolayer. HI insulin Langmuir monolayer can be used to study interactions of HI with a membrane as Langmuir monolayers are used as an in vitro model of biological membranes. Surface pressure and surface potential-area isotherms were used to characterize the HI Langmuir monolayer. The compression-decompression cycles and stability measurements showed a homogeneous and stable monolayer at the air-water interface. However, higher surface pressures resulted in a higher decrease in area and less stability. In situ UV-vis and fluorescence spectroscopy were used to verify the homogeneity of the HI monolayer and to identify the chromophore residues in the HI. Domain formation was examined through epifluorescence and Brewster angle microscopies. The conformation of HI was examined by circular dichroism (CD) and Fourier transform infrared spectroscopy (FTIR) in the aqueous phase and at the air-water interface by infrared reflection absorption spectroscopy (IRRAS). HI was found to exist as a monomer in 2-D.

Human islet amyloid polypeptide at the air-aqueous interface: a Langmuir monolayer approach.

Human islet amyloid polypeptide (hIAPP) is the source of the major component of the amyloid deposits found in the islets of Langerhans of around 95 per cent type 2 diabetic patients. The formation of aggregates and mature fibrils is thought to be responsible for the dysfunction and death of the insulin-producing pancreatic ß-cells. Investigation on the conformation, orientation and self-assembly of the hIAPP at time zero could be beneficial for our understanding of its stability and aggregation process. To obtain these insights, the hIAPP at time zero was studied at the air-aqueous interface using the Langmuir monolayer technique. The properties of the hIAPP Langmuir monolayer at the air-aqueous interface on a NaCl subphase with pH 2.0, 5.6 and 9.0 were examined by surface pressure- and potential-area isotherms, UV-Vis absorption, fluorescence spectroscopy and Brewster angle microscopy. The conformational and orientational changes of the hIAPP Langmuir monolayer under different surface pressures were characterized by p-polarized infrared-reflection absorption spectroscopy, and the results did not show any prominent changes of conformation or orientation. The predominant secondary structure of the hIAPP at the air-aqueous interface was α-helix conformation, with a parallel orientation to the interface during compression. These results showed that the hIAPP Langmuir monolayer at the air-aqueous interface was stable, and no aggregate or domain of the hIAPP at the air-aqueous interface was observed during the time of experiments.

Study of the aggregation of human insulin Langmuir monolayer.

The human insulin (HI) Langmuir monolayer at the air-water interface was systematically investigated in the presence and absence of Zn(II) ions in the subphase. HI samples were dissolved in acidic (pH 2) and basic (pH 9) aqueous solutions and then spread at the air-water interface. Spectroscopic data of aqueous solutions of HI show a difference in HI conformation at different pH values. Moreover, the dynamics of the insulin protein showed a dependence on the concentration of Zn(II) ions. In the absence of Zn(II) ions in the subphase, the acidic and basic solutions showed similar behavior at the air-water interface. In the presence of Zn(II) ions in the subphase, the surface pressure-area and surface potential-area isotherms suggest that HI may aggregate at the air-water interface. It was observed that increasing the concentration of Zn(II) ions in the acidic (pH 2) aqueous solution of HI led to an increase of the area at a specific surface pressure. It was also seen that the conformation of HI in the basic (pH 9) medium had a reverse effect (decrease in the surface area) with the increase of the concentration of Zn(II) ions in solution. From the compression-decompression cycles we can conclude that the aggregated HI film at air-water interface is not stable and tends to restore a monolayer of monomers. These results were confirmed from UV-vis and fluorescence spectroscopy analysis. Infrared reflection-absorption and circular dichroism spectroscopy techniques were used to determine the secondary structure and orientation changes of HI by zinc ions. Generally, the aggregation process leads to a conformation change from α-helix to ß-strand and ß-turn, and at the air-water interface, the aggregation process was likewise seen to induce specific orientations for HI in the acidic and basic media. A proposed surface orientation model is presented here as an explanation to the experimental data, shedding light for further research on the behavior of insulin as a Langmuir monolayer.

Surface chemistry and spectroscopy of UG8 asphaltene Langmuir film, part 2.

While there has been much focus on asphaltenes in toluene, there has been much less focus on asphaltenes in other solvents. It is important to quantify characteristics of asphaltenes in solvents besides toluene in order to better assess their molecular architecture as well as their fundamental aggregation characteristics. The present work focuses on the investigation of UG8 asphaltene Langmuir films at the air-water interface using chloroform as spreading solvent. The results are compared to the results recently obtained using toluene as spreading solvent. Surface pressure-area isotherms and UV-vis spectroscopy indicate that asphaltenes form smaller nanoaggregates in chloroform than in toluene in similar concentration ranges. Still these nanoaggreates share common features with those in toluene. From the surface pressure-area and compression-decompression isotherms, Brewster angle microscopy, and p-polarized infrared reflection-absorption spectroscopy, it was concluded that small size aggregates are spread on the water surface and the compression of the film leads to formation of large aggregates. The films (Langmuir-Schaefer and Langmuir-Blodgett) studied by atomic force microscopy reveal the existence of nanoaggregates spread on the water surface that coexist with large aggregates formed during compression. In addition to these findings, the spreading solvent, chloroform, allows the determination of asphaltene absorption bands using in situ UV-vis spectroscopy at the air-water interface after 15 min waiting time period. The absorbance data carried out after waiting a time period of 1 h shows similar features with the ones carried out after only 15 min; therefore, there is no need to wait 1 h as in the case when toluene is used as spreading solvent. A comparison of the data obtained from chloroform and toluene shows that smaller aggregate sizes are obtained from chloroform as suggested from the surface pressure-area isotherm, in situ UV-vis spectroscopy, and atomic force microscopy. Nevertheless, the similarity of these nanoaggregates in different solvents suggests this formation is a fundamental property of asphaltenes. Moreover, the lack of the isolated absorption band for one-ring aromatics and only a small peak for two-ring aromatics in the UV spectrum of asphaltenes indicate that these groups are not present in asphaltenes in significant quantities.

Surface chemistry and spectroscopy of UG8 asphaltene Langmuir film, part 1.

This research focuses on a systematic investigation of UG8 asphaltene Langmuir films at the air-water interface using toluene as the spreading solvent. From the surface pressure-area isotherms, it was concluded that small-sized aggregates are spread on the water surface and the compression of the film leads to formation of large aggregates. Our methods provide a stringent test and confirmation for the formation of corresponding asphaltene nanoaggregates that have recently been proposed for bulk solutions. These results were confirmed by compression-decompression isotherms, Brewster angle microscopy, and p-polarized infrared reflection-absorption spectroscopy. The transfer of a single layer using both the Langmuir-Schaefer and Langmuir-Blodgett deposition techniques shows different aggregate shapes depending on the technique used as imaged using atomic force microscopy. The films reveal the existence of nanoaggregates spread on the water surface that coexist with large aggregates formed during compression. For the nanoaggregate, the thickness of the Langmuir-Schaefer and Langmuir-Blodgett films determined by AFM is consistent with small aggregation numbers of nanoaggregates determined by Langmuir film compression. In addition to these findings, the spreading solvent, toluene, was found to be trapped within the aggregates as confirmed by in situ UV-vis spectroscopy at the air-water interface. This result was possible only after waiting a time period of 1 h to allow the complete evaporation of the spreading solvent. This is the only study that reveals the presence of the in situ toluene within the UG8 aggregates directly at the air-water interface.

Human cardiac troponin I: a Langmuir monolayer study.

Human cardiac troponin I (cTnI) is the preferred biomarker in the assessment of myocardial infarction. It is known to interact with troponin C and T to form a trimeric complex. Whereas small amounts are found in the cytoplasm, most of cTnI is in the form of a complex with actin located in myofilaments. To understand these interactions of cTnI better, we first investigated the surface chemistry of cTnI as a Langmuir monolayer spread at the air-water interface. We investigated the optimal conditions for obtaining a stable Langmuir monolayer in terms of changing the ionic strength of the subphase using different concentrations of potassium chloride. Monolayer stability was investigated by compressing the cTnI monolayer to a specific surface pressure and keeping the surface pressure constant while measuring the decrease in the molecular area as a function of time. Aggregation and/or domain formation was investigated by using compression-decompression cycles, in situ UV-vis spectroscopy, Brewster angle microscopy (BAM), and epifluorescence microscopy. To ensure that the secondary structure is maintained, we used infrared reflection-absorption spectroscopy (IRRAS) directly at the air-subphase interface. It was found that cTnI forms a very stable monolayer (after more that 5000 s) that does not aggregate at the air-subphase interface. The cTnI molecules maintain their secondary structure and, on the basis of the low reflectivity observed using BAM measurements and the low reflection-absorption intensities measured with IRRAS spectroscopy, lie flat on the subphase with the alpha-helices parallel to the air-subphase interface.

Antibody-gold quantum dot-PAMAM dendrimer complex as an immunoglobulin immunoassay.

Gold quantum dots (AuQDs) were synthesized and electrostatically conjugated to goat-derived anti-human IgG for the purpose of detecting human IgG in solution over a broad range of concentrations. The system is able to detect human IgG by linear fluorescence quenching over a micromolar to nanomolar concentration range. We have demonstrated the specificity and a wide dynamic range of the proposed immunoassay. The quenching is a result of competitive surface quenching of the AuQDs. Characterization, details of the immunoassay, and the quenching mechanism, are discussed.

Photothermal ablation of amyloid aggregates by gold nanoparticles.

Amyloid peptide (Abeta) is found in the brain and blood of both healthy and diseased individuals alike. However, upon secondary structure transformation to a beta-sheet dominated conformation, the protein aggregates. These aggregates accumulate to form neuritic plaques that are implicated in the pathogenesis of Alzheimer's disease. Gold nanoparticles are excellent photon-thermal energy converters. The extinction coefficient of the surface plasmon band of gold nanoparticles is very large when compared to typical organic dyes. In this study, gold nanoparticle-Abeta conjugates were prepared and the photothermal ablation of amyloid peptide aggregates by laser irradiation was studied. Monofunctional gold nanoparticles were prepared using a recently reported solid phase modification method and then coupled to fragments of Abeta peptide, namely Abeta(31-35) and Abeta(25-35). The conjugates were then mixed with Abeta fragments in solution. The aggregated peptide formation was studied by a series of spectroscopic and microscopic techniques. The peptide aggregates were then irradiated by a continuous laser. With gold nanoparticle-Abeta conjugates present the aggregates were destroyed by photothermal ablation. Gold nanoparticles without Abeta conjugation were not incorporated into the aggregates and when irradiated did not result in photothermal ablation. With gold nanoparticle-Abeta conjugates the ablation was selective to the site of irradiation and minimal damage was observed as a result of thermal diffusion. In addition to the application of photoablation to a protein-based sample the nanoparticles and the chemistry involved provide an easily monofunctionalized photothermal material for the biological conjugation.

Rat osseous plate alkaline phosphatase as Langmuir monolayer--an infrared study at the air-water interface.

A glycosylphosphatidylinositol (GPI)-anchored enzyme (rat osseous plate alkaline phosphatase-OAP) was studied as monolayer (pure and mixed with lipids) at the air-water interface. Surface pressure and surface potential-area isotherms showed that the enzyme forms a stable monolayer and exhibits a liquid-expanded state even at surface pressure as high as 30 mN m(-1). Isotherms for mixed dimyristoylphosphatidic acid (DMPA)-OAP monolayer showed the absence of a liquid-expanded/liquid-condensed phase transition as observed for pure DMPA monolayer. In both cases, pure or mixed monolayer, the enzyme preserves its native conformation under compression at the air-water interface as observed from in situ p-polarized light Fourier transform-infrared reflection-absorption spectroscopic (FT-IRRAS) measurements. Changes in orientation and conformation of the enzyme due to the presence or absence of DMPA, as well as due to the surface compression, are discussed.

Study of molecular aggregation of artificial amyloid in a langmuir monolayer by infrared spectroscopy.

A synthesized peptidolipid (C18IIGLM-NH2) comprised of a single C18-saturated hydrocarbon chain connected to the amino acid sequence IIGLM terminated with the NH2 group was spread on water, which formed a stable Langmuir monolayer. The Langmuir and Langmuir-Blodgett (LB) films have been characterized by measurements of surface pressure-area (pi-A) and surface potential-area (DeltaV-A) isotherms and infrared multiple-angle incidence resolution spectrometry (MAIRS). The Langmuir monolayer had a significantly larger limiting molecular area than that of a similar molecule of C18IIGLM-OH, which was reported in our previous study. The surface dipole moment analysis coupled with the pi-A isotherm suggested that the C18IIGLM-NH2 monolayer was extraordinarily stiff and the fundamental structure of the monolayer was brought about before the monolayer compression. The infrared MAIRS analysis of the C18IIGLM-NH2 LB film revealed that the backbone structure of the monolayer was the 'antiparallel' beta sheet aligned parallel to the substrate. Since the C18IIGLM-OH LB film was made of 'parallel' beta sheet with a random orientation, it has been found that the present C18IIGLM-NH2 Langmuir monolayer has a largely different monolayer structure, although the chemical structures are slightly different from each other by the terminal group only.

Inhibition of aggregation of a biomimic peptidolipid Langmuir monolayer by Congo red studied by UV-vis and infrared spectroscopies.

A synthetic peptidolipid consisted of a hydrocarbon chain with a chain length of C18 and a peptide moiety of IIGLM terminated with an amine group, designated as C18IIGLM-NH2, has been employed as a biomimic model compound of amyloid peptide for exploring molecular interaction and orientation with the use of the Langmuir monolayer and Langmuir-Blodgett film techniques. Inspired by a well-known fact that a stain reagent, Congo red (CR), binds well to the amyloid-mimic part (IIGLM), inhibition of molecular aggregation of C18IIGLM-NH2 by interaction with CR was expected, and it has been investigated by use of surface pressure-area isotherm, surface dipole moment-area isotherm, Brewster-angle microscopy, and UV-vis/infrared spectroscopies. It has been revealed that monomeric CR molecules whose long axis is parallel to the Langmuir monolayer surface are penetrating the C18IIGLM-NH2 Langmuir monolayer, which plays a role of inhibition of molecular aggregation via hydrogen bonding.

Detection of organophosphorus compounds by covalently immobilized organophosphorus hydrolase.

As a consequence of organophosphorus (OP) toxins posing a threat to human life globally, organophosphorus hydrolase (OPH) has become the enzyme of choice to detoxify such compounds. Organophosphorus hydrolase was covalently immobilized onto a quartz substrate for utilization in paraoxon detection. The substrate was cleaned and modified prior to chemical attachment. Each modification step was monitored by imaging ellipsometry as the thickness increased with each modification step. The chemically attached OPH was labeled with a fluorescent dye (7-isothiocyanato-4-methylcoumarin) for the detection of paraoxon in aqueous solution, ranging from 10(-9) to 10(-5) M. UV-visible spectra were also acquired for the determination of the hydrolysis product of para-oxon, namely p-nitrophenol.

Spectroscopic detection of Saxitoxin: an alternative to mouse bioassay.

Herein, we report the surface modification of quartz with a coumaryl-aza-crown-6 derivative to detect Saxitoxin using fluorescence enhancement through Photoinduced Electron Transfer and the sensitivity with this system approaches the limit of the mouse bioassay which is the current benchmark for Saxitoxin detection.

Peptidolipid as binding site of acetylcholinesterase: molecular recognition of paraoxon in Langmuir films.

Peptidolipid C18H35O (stearoyl)-Phe-Trp-Ser-His-Glu (peptidolipid A) was synthesized and spread at the air-water interface to study the interaction with an organophosphorus compound. Paraoxon, sodium dihydrogen phosphate, or 4-nitrophenyl phosphate disodium was added to the subphase, but only paraoxon changed the surface pressure-area (pi-A) isotherm of peptidolipid A. This indicated a specific interaction between paraoxon and peptidolipid A. To clarify which amino acid residue of peptidolipid A was responsible for the interaction, peptidolipid B, namely, C18H35O-Gly-His-Ser-Glu-Glu, was synthesized and studied as a Langmuir film. The difference between the pi-A isotherms of peptidolipid B in the absence and presence of paraoxon in the subphase was minimal; consequently, the presence of amino acids phenylalanine (Phe) and tryptophan (Trp) in peptidolipid A may explain the interaction between peptidolipid A and paraoxon. The compression-decompression cycles and kinetic studies of peptidolipid A showed that the Langmuir film was stable. The in situ optical properties of the peptidolipid A Langmuir film such as UV-vis and fluorescence spectroscopies were examined to elucidate the interaction between peptidolipid A and paraoxon. UV-vis absorption of peptidolipid A was investigated in the presence and absence of paraoxon in the subphase. The emission maximum of fluorescence of Trp in peptidolipid A was observed at 351 nm on pure water, and the band intensity decreased when the concentration of paraoxon increased in the subphase. This suggested that the Trp was involved in the molecular recognition process. Epifluorescence micrographs showed domains of peptidolipid A on the pure water subphase. In the presence of paraoxon in the subphase, the Langmuir film of peptidolipid A showed a homogeneity, which was another indication of the recognition between paraoxon and peptidolipid A.

Film structures of poly(amido amine) dendrimers with an azacrown core and long alkyl chain spacers on water or Ag nanoparticle suspension.

Newly designed poly(amido amine) dendrimers, which have an azacrown core, hexyl spacers, and methyl ester terminals (aza-C6-PAMAM dendrimer), were spread at the air-water and air-silver nanoparticle suspension interfaces, and their film structures were examined by surface pressure-area (pi-A) and surface potential-area (DeltaV-A) isotherms and epifluorescence microscopy. It was revealed that generation (G) 1.5 aza-C6-PAMAM dendrimer on a water subphase formed homogeneous film with face-on configuration, and this configuration was maintained during compression. On the other hand, a G2.5 dendrimer film on the air-water interface took initially homogeneous and face-on configuration that was followed by the conformational change during compression. Using a silver nanoparticle suspension as subphase, G1.5 film was significantly reinforced, and the partial collapse (cracks) in the film appeared as network texture. For a G2.5 dendrimer film, the pi-A and DeltaV-A isotherm properties were similar to that on the water subphase except for the collapsed film; small spots instead of cracks were formed under the film after collapse. These effects of the silver nanoparticle may be due to the formation of a dendrimer/silver nanoparticle composite. The formation process of the nanocomposite film was verified by UV-vis spectroscopy. For the G1.5 dendrimer, silver clusters and nanoparticles adsorbed to the dendrimer film after spreading and formed a small amount of aggregates. During compression, the aggregation proceeded even at low surface pressure. For the G2.5 dendrimer, a dendrimer/nanoparticle composite was also formed after spreading. However, with the initial compression, the absorption bands of clusters, nanoparticles, and aggregate increased together. Upon further compression, while the bands of cluster and nanoparticles decreased, the bands of aggregate still increased. These results suggest that the G2.5 dendrimer covered the cluster and nanoparticles more efficiently than the G1.5 dendrimer did because of the larger molecular size.

Fibril-like aggregate formation of peptide carboxylate Langmuir films analyzed by surface pressure, surface dipole moment, and infrared spectroscopy.

The fibril formation process of a synthetic peptidolipid compound in a Langmuir monolayer at the air-water interface has been analyzed by surface pressure and surface dipole moment-area isotherms, followed by infrared spectral analysis of related Langmuir-Blodgett films. Thus far, the analysis of randomly oriented molecular assemblies has been a difficult matter, especially for spectroscopic measurements. In the present study, the Langmuir film isotherms were discussed in detail, and they have readily been correlated to the infrared spectra. For the spectral analysis, infrared multiple-angle incidence resolution spectroscopy (MAIRS) was employed, which was compared to the results by conventional techniques. Since the peptide assemblies greatly responded to a metal surface, the reflection-absorption technique was not useful for our analysis. Instead, MAIRS was found to be powerful to reveal the anisotropic structure of the Langmuir films, and a disordered molecular architecture has been revealed via the molecular orientation analysis. As a result, the fibril-like aggregation formation process during the monolayer compression, which was suggested by previous topographical study, has been found to be due to the stiff domain formation in the Langmuir films.