Anatomical complexities affecting root canal preparation: a narrative review.

A fundamental aspect of the Endodontic field is the knowledge of root canal anatomy. Using a variety of techniques, the internal and external anatomy of teeth have been extensively investigated throughout the past century. Recent improvements in three-dimensional computed tomography have enabled more detailed evaluations of root canal morphology in both clinical and laboratory settings. Essentially, researches have unveiled that the root canal constitutes a complex system, comprising not only the main root canal but also lateral components, including isthmuses, fins, accessory canals and apical ramifications. Undoubtedly, this intricate morphology poses a significant challenge when it comes to the process of shaping, cleaning and disinfecting the root canal system. This article aims to explore the anatomical aspects of the root canal system that impact the chemomechanical procedures.

Apical root canal anatomy in the mesiobuccal root of maxillary first molars: influence of root apical shape and prevalence of apical foramina - a micro-CT study.

AIM: To determine whether a relationship exists between the apical shape of roots and root canal system complexity by performing a micro-computed tomography analysis. METHODOLOGY: One hundred extracted permanent maxillary first molars were scanned using a micro-computed tomography device at 19.6 µm voxel size. Two groups of mesiobuccal roots were formed according to the root aspect ratio value in the apical 3-mm cross-sectional level ('<2 and ≥ 2.00'). Data were recorded regarding the number and presence of accessory canals and their location, isthmus, presence of the mesiobuccal canal and dentine thickness. Depending on the analysed variable, Mann-Whitney U test and Z-test for proportions were used to compare groups. The significant level was set at 5%. RESULTS: Mesiobuccal roots with an aspect ratio ≥ 2.00 at the apical 3-mm cross-sectional level had higher percentages of accessory canals, apical foramina and MB2 root canals in the apical 3 mm. The vertical average distance from the accessory foramina and origin from the anatomic apex was 1.40 and 2.19 mm, respectively. Overall, 21.8% of the accessory canals had their origin coronal to a 3-mm root resection line. There was no difference between the groups regarding dentine thickness. CONCLUSION: The shape of the apical 3 mm of maxillary first molar mesiobuccal roots was a predictive factor for the presence of complex root canal systems. Roots with a lower aspect ratio had less complex apical anatomy.

Micro-CT analysis of danger zone thickness in the mesiobuccal roots of maxillary first molars.

AIM: To evaluate dentine thickness from both distal ('danger zone') and mesial ('safety zone') aspects of the MB1 and MB2 canals of maxillary first molars at the furcation level using micro-CT imaging. METHODOLOGY: One hundred maxillary first molars with two canals in the MB root were selected from a Brazilian subpopulation and scanned at a resolution of 19.6 µm in a micro-CT device. From each specimen, two axial cross-sectioned images were selected at 2 and 3 mm apical to the furcation level of the MB root and evaluated for the smallest dentinal thickness. Measurements were made from the outer perimeter of the MB1 and MB2 canals towards the external root surface from both distal (danger zone) and mesial (safety zone) aspects of the root. The influence of an isthmus was also considered in the analysis, and samples were classified according to the presence or absence of an isthmus in the axial sections. Non-parametric Wilcoxon signed-rank tests were used to compare dentinal thickness between MB1 and MB2 canals with a significant level set at 5%. Colour-coded 3D models of dentine thickness throughout the MB root were created and evaluated qualitatively. RESULTS: At both levels, median dentine thickness of the MB2 canal was significantly lower in both distal and mesial aspects of the root in comparison with the MB1 canal (P < 0.01). The presence of an isthmus was not a variable that influenced dentinal thickness. Colour-coded models indicated that dentine thickness was dependent on the cross-sectional shape of the MB root. At least 50% of the sample had <1 mm of dentine thickness at the danger zone of the MB2 canal. CONCLUSIONS: Danger zones in the MB roots of maxillary first molars were not symmetrical. MB2 canals had less dentine thickness on both aspects of the root compared to the MB1 canal.

Morphological evaluation of maxillary second molars with fused roots: a micro-CT study.

AIM: To evaluate the internal and external morphologies of fused-rooted maxillary second molars by means of micro-computed tomography (micro-CT) analysis. METHODOLOGY: A total of 100 fused-rooted maxillary second molars from a Brazilian subpopulation were divided into six groups according to the root morphology. The samples were scanned at a resolution of 19.6 µm and evaluated with regard to the external morphology of the roots, the root canal configuration, the percentage frequency of C-shaped canals and isthmuses, as well as the morphology of the root canal system at 1, 2 and 3 mm from the anatomical apex of the fused roots. RESULTS: The most prevalent root canal fusions were type 1, mesiobuccal root fused with distobuccal root (32%), followed by type 3, DB root fused with P root (27%), and type 4, MB root fused with DB root, and P root fused with MB or DB roots (21%). The prevalence of C-shaped root canal systems were 22%. Depending on the type of root fusion, the percentage frequency of isthmuses in the apical level varied from 9.3% to 42.8%, whilst the presence of apical deltas ranged from 18.5% to 57.1% of teeth. CONCLUSIONS: The root canal system of maxillary second molars with fused roots may have a high incidence of merging canals, isthmuses, apical deltas and C-shaped configurations.

Comparative accuracy of the Clearing Technique, CBCT and Micro-CT methods in studying the mesial root canal configuration of mandibular first molars.

AIMS: To compare the accuracy of the clearing technique and cone beam computed tomography (CBCT) in the assessment of root canal configurations using micro-computed tomography (micro-CT) imaging system as the reference standard. METHODOLOGY: Thirty-two mesial roots of mandibular first molars, selected on the basis of micro-CT scans (voxel size: 19.6 µm) and presenting several canal configurations, were evaluated using 2 CBCT scanners (voxels sizes: 120 µm and 150 µm) followed by the clearing technique. Two examiners analysed the data from each method and classified the anatomical configuration of the mesial canal according to Vertucci's system. Data were compared using Fisher's exact and chi-square tests. Reliability for each assessment was verified by the kappa test, and significance level was set at 5%. RESULTS: Kappa value indicated a high level of agreement between the examiners. Detection of type I configurations was significantly lower in cleared teeth (P < 0.05), whilst type II root canals were detected in all specimens by both tests (P > 0.05). In mesial roots with variable anatomical configurations, CBCT and the clearing method were significantly less accurate than the reference standard (P < 0.05). CONCLUSION: Within the tooth population studied, accuracy of identifying mesial root canal configuration was influenced greatly by the evaluation method and the type of anatomy. Detection of type I configurations in cleared teeth was significantly lower, whilst type II configurations were detected in all specimens by both methods. In mesial roots with variable anatomical configurations, neither CBCT nor clearing methods were accurate for detecting the actual root canal anatomy.

Effect of finishing instrumentation using NiTi hand files on volume, surface area and uninstrumented surfaces in C-shaped root canal systems.

AIM: To assess the effect of 90°-oscillatory instrumentation with hand files on several morphological parameters (volume, surface area and uninstrumented surface) in C-shaped root canals after instrumentation using a single-file reciprocation system (Reciproc; VDW, Munich, Germany) and a Self-Adjusting File System (SAF; ReDent Nova, Ra'anana, Israel). METHODOLOGY: Twenty mandibular second molars with C-shaped canals and C1 canal configurations were divided into two groups (n = 10) and instrumented with Reciproc and SAF instruments. A size 30 NiTi hand K-file attached to a 90°-oscillatory motion handpiece was used as final instrumentation in both groups. The specimens were scanned using micro-computed tomography after all procedures. Volume, surface area increase and uninstrumented root canal surface were analysed using CTAn software (Bruker-microCT, Kontich, Belgium). Also, the uninstrumented root canal surface was calculated for each canal third. All values were compared between groups using the Mann-Whitney test and within groups using the Wilcoxon's signed-rank test. RESULTS: Instrumentation with Reciproc significantly increased canal volume compared with instrumentation with SAF. Additionally, the canal volumes were significantly increased after 90°-oscillatory instrumentation (between and within group comparison; (P < 0.05)). Regarding the increase in surface area after all instrumentation protocols, statistical analysis only revealed significant differences in the within groups comparison (P < 0.05). Reciproc and SAF instrumentation yielded an uninstrumented root canal surface of 28% and 34%, respectively, which was not significantly different (P > 0.05). Final oscillatory instrumentation significantly reduced the uninstrumented root canal surface from 28% to 9% (Reciproc) and from 34% to 15% (SAF; P < 0.05). The apical and middle thirds exhibited larger uninstrumented root canal surfaces after the first instrumentation that was significantly reduced after oscillatory instrumentation (P < 0.05). CONCLUSIONS: The Reciproc and SAF system were associated with similar morphological parameters after instrumentation of mandibular second molars with C-shaped canals except for a higher canal volume increase in the Reciproc group compared to the SAF. Furthermore, the final use of 90°-oscillatory instrumentation using NiTi hand files significantly decreased the uninstrumented canal walls that remained after Reciproc and SAF instrumentation.

Micro-CT evaluation of C-shaped mandibular first premolars in a Brazilian subpopulation.

AIM: To describe morphometric aspects of the internal anatomy of C-shaped mandibular premolars from a Brazilian subpopulation using micro-CT analysis. METHODOLOGY: First mandibular premolars with radicular grooves (n = 123) were scanned using a micro-computed tomography system. After cross-section analysis, 83 specimens were identified with a C-shaped canal and selected for micro-CT analysis. Number and location of canals according to Vertucci's classification, distances between anatomic landmarks, occurrence of apical deltas, furcation canals, prevalence of C-shaped cross-sections at five levels as well as 2-dimensional analysis (Area, perimeter, roundness, aspect ratio, major and minor diameters) were performed for the more prevalent anatomical features. Data were compared statistically using Kruskal-Wallis tests (α = 0.05). RESULTS: The more prevalent anatomical types according to Vertucci's classification were Type I (13%), III (8%), V (37%) and VII (2%). Mean distances from the furcation to the cemento-enamel junction were in the range of 5.36-5.65 mm. Apical deltas and furcation canals were present in 36 (43%) and 27 (33%) specimens, respectively. C-shaped cross-sections were more prevalent at the middle (56%) and apical middle levels (81%). Overall, significant differences were found in the 2-dimensional analyses between single canals at the apical third and buccal and lingual canals of Vertucci's V classification (P < 0.05). CONCLUSIONS: In this Brazilian subpopulation, C-shaped canal configuration of the root canal system was found in 67% of extracted first mandibular premolars with radicular grooves. Vertucci's types I and V were the most prevalent anatomical variations. C-shaped cross-sections were more prevalent in the middle third, and the presence of apical deltas was the most common feature in the apical third.

Efficacy of xylene and passive ultrasonic irrigation on remaining root filling material during retreatment of anatomically complex teeth.

AIM: To evaluate the volume of remaining filling material in the mesial root canals of mandibular molars after root canal retreatment with different procedures performed sequentially. METHODOLOGY: The mesial root canals of 12 human first mandibular molars were instrumented using the BioRace system until a size 25, .06 taper instrument. The mesial roots were filled with gutta-percha and AH-Plus using a vertical compaction technique. The specimens were scanned using microcomputed tomography with a voxel size of 16.8 µm before and after the retreatment procedures. To remove the filling material, the root canals were enlarged until the size 40, .04 taper instrument. The second step was to irrigate the root canals with xylene in the attempt to clean the root canals with paper points. In the third step, the passive ultrasonic irrigation technique (PUI) was performed using 2.5% sodium hypochlorite. The initial and residual filling material volume (mm(3) ) after each step was evaluated from the 0.5 to 6.5 mm level. The obtained data were expressed in terms of percentage of residual filling material. Statistical analysis was performed using the Friedman test (P < 0.05). RESULTS: All specimens had residual filling materials after all retreatment procedures. Passive ultrasonic irrigation enhanced the elimination of residual filling material in comparison with the mechanical stage at the 0.5-2.5 mm and 4.5-6.5 mm levels (P < 0.05). No significant difference was found between xylene and PUI methods. CONCLUSIONS: Filling materials were not completely removed by any of the retreatment procedures. The use of xylene and PUI after mechanical instrumentation enhanced removal of materials during endodontic retreatment of anatomically complex teeth.

Influence of powder-to-water ratio on radiopacity, setting time, pH, calcium ion release and a micro-CT volumetric solubility of white mineral trioxide aggregate.

AIM: To evaluate the radiopacity, setting time, pH level, calcium ion release and solubility of white mineral trioxide aggregate (MTA; Angelus, Londrina, Pr, Brazil) with different powder-to-water ratios. METHODOLOGY: Three MTA groups were prepared using 4 : 1, 3 : 1 and 2 : 1 powder-to-water ratios. For the radiopacity analysis, the 10 × 1 mm specimens were arranged on occlusal films with a cylinder of dentine and an aluminium stepwedge. The digitized radiographs were evaluated with Digora 1.51 software to determine the radiographic density. The setting time test was performed according to the American Society for Testing and Materials 266/08 standard specifications, but the specimens were made according to International Organization for Standardization 6876:2001. Thirty acrylic teeth with root-end filling material were immersed in ultrapure water for measurement of pH level and calcium ion release (atomic absorption spectrophotometer) at 3, 24, 72 and 168 h. In the solubility test, the root-end fillings of 30 acrylic teeth were scanned twice by a Micro-CT, before and after immersion in ultrapure water for 168 h. Digital data were reconstructed, and the volume (mm(3) ) of the samples was obtained using CTan software (CTan v1.11.10.0, SkyScan). The data were statistically analysed by the anova, Tukey, Kruskal-Wallis and Dunn's tests. RESULTS: The radiopacity was higher (P < 0.05) when the 4 : 1 proportion was utilized. The setting time was longer, and the pH level and calcium ion release were higher (P < 0.05) with a greater volume of water. The group with more water (2 : 1) had significantly (P < 0.05) more material volume loss (6.46%) compared with the other groups. CONCLUSIONS: The ratio of powder/water significantly interfered with the physical and chemical properties of white MTA Angelus.

Biofilm removal by 6% sodium hypochlorite activated by different irrigation techniques.

AIM: To compare the removal of biofilm utilizing four irrigation techniques on a bovine root canal model. METHODOLOGY: Fifty dentine specimens (2 × 2 mm) were infected with biofilm. The samples were then adapted to previously created cavities in the bovine model. The root canals were irrigated twice with 2 mL of 6% sodium hypochlorite for 2 min (4 min total). Following initial irrigation, the different treatment modalities were introduced for 60 s (3 × 20 s intervals). The evaluated techniques were needle irrigation, Endoactivator (Dentsply Tulsa Dental, Tulsa, OK, USA), passive ultrasonic irrigation and laser-activated irrigation (photon-induced photoacoustic streaming). The controls were irrigated with distilled water and conventional needle irrigation. Subsequently, the dentine samples were separated from the model and analysed using a scanning electron microscope (SEM). Fifteen operative fields were scanned per block, and SEM pictures were captured. Two calibrated evaluators examined the images and collected data using a four-degree scale. Nonparametric tests were used to evaluate for statistical significance amongst the groups. RESULTS: The group undergoing laser-activated irrigation using photon-induced photoacoustic streaming exhibited the most favourable results in the removal of biofilm. Passive ultrasonic irrigation scores were significantly lower than both the Endoactivator and needle irrigation scores. Sonic and needle irrigation were not significantly different. The least favourable results were found in the control group. CONCLUSIONS: Laser activation of 6% sodium hypochlorite significantly improved the cleaning of biofilm-infected dentine followed by passive ultrasonic irrigation.

Prevalence of apical periodontitis detected in cone beam CT images of a Brazilian subpopulation.

OBJECTIVES: The aim of this study was to determine the prevalence of apical periodontitis (AP) detected in cone beam CT (CBCT) images from a database. METHODS: CBCT images of 300 Brazilian patients were assessed. AP images were measured in three dimensions. Age, gender, number and location of total teeth in each patient were considered. AP location was considered according to tooth groups. The extent of AP was determined by the largest diameter in any of the three dimensions. Percentages and the χ(2) test were used for statistical analysis. RESULTS: AP was found in 51.4% of the patients and in 3.4% of the teeth. Higher prevalence of AP was found in 60- to 69-year-olds (73.1%) and in mandibular molars (5.9%) (p < 0.05). Inadequate endodontic treatment presented higher prevalence of AP (78.1%). CONCLUSIONS: AP can be frequently found in CBCT examinations. The presence of AP has a significant association with patients' age, and tooth type and condition. CBCT databases are useful for cross-sectional studies about AP prevalence in a population.

Evaluation of the propylene glycol association on some physical and chemical properties of mineral trioxide aggregate.

AIM: To evaluate the influence of propylene glycol (PG) on the flowability, setting time, pH and calcium ion release of mineral trioxide aggregate (MTA). METHODOLOGY: Mineral trioxide aggregate was mixed with different proportions of PG, as follows: group 1: MTA + 100% distilled water (DW); group 2: MTA + 80% DW and 20% PG; group 3: MTA + 50% DW and 50% PG; group 4: MTA + 20% DW and 80% PG; group 5: MTA + 100% PG. The ANSI/ADA No. 57 was followed for evaluating the flowability and the setting time was measured by using ASTM C266-08. For pH and calcium release analyses, 50 acrylic teeth with root-end cavities were filled with the materials (n = 10) and individually immersed in flasks containing 10 mL deionized water. After 3 h, 24 h, 72 h and 168 h, teeth were placed in new flasks and the water in which each specimen was immersed had its pH determined by a pH metre and the calcium release measured by an atomic absorption spectrophotometer with a calcium-specific hollow cathode lamp. Data were analysed by using one way anova test for global comparison and by using Tukey's test for individual comparisons. RESULTS: The highest value of flowability was observed with MTA + 20% DW and 80% PG and the lowest values were found with MTA + 100% DW. They were significantly different compared to the other groups (P < 0.05). The presence of PG did not affect the pH and calcium release. The MTA + 100% PG favoured the highest (P < 0.05) pH and calcium release after 3 h. Increasing the PG proportion interfered (P < 0.05) with the setting time; when used at the volume of 100% setting did not occur. CONCLUSION: The addition of PG to MTA-Angelus increased its setting time, improved flowability and increased the pH and calcium ion release during the initial post-mixing periods. The ratio of 80% DW­20% PG is recommended.

Variability of physicochemical properties of an epoxy resin sealer taken from different parts of the same tube.

AIM: To analyse several physicochemical properties of AH Plus (Dentsply DeTrey, Konstanz, Germany), including setting time, flow, radiopacity and the degree of conversion (DC); and to correlate the results with the source of the material: from the beginning, middle or end of the tubes in which they were supplied. METHODOLOGY: Three experimental groups were established for each property investigated. Group 1 corresponded to material taken from the beginning of tubes A and B; Group 2 corresponded to material taken from the middle of each tube; and group 3 corresponded to that from the end of each tube. The setting time, flow and radiopacity were studied according to American National Standards Institute/American Dental Association (ANSI/ADA) Specification 57. DC was determined from infrared spectra, which were recorded at 1-h intervals for the first 6 h; then, at 2-h intervals for the next 14 h; then, at 24 and 30 h. Data were analysed statistically by analysis of variance (anova), Tukey-Kramer, Kruskal-Wallis and Dunn tests, with a significance level of 5%. RESULTS: Group 1 had a significantly longer setting time (2303 ± 1058 min) (P < 0.05). Group 3 had the lowest flowability (30.0 ± 0.7 mm) and the highest radiopacity (14.85 ± 1.8 mm Al) (P < 0.05). No differences were found for the DC test (P > 0.05). CONCLUSION: The results suggest that segregation occurs between the organic and inorganic components of AH Plus sealer, thereby changing the setting time, flow and radiopacity.

Antimicrobial effect of endodontic solutions used as final irrigants on a dentine biofilm model.

AIM: To evaluate the residual biovolume of live bacterial cells, the mean biofilm thickness and the substratum coverage found in mixed biofilms treated with different endodontic irrigant solutions. METHODOLOGY: Twenty-five bovine dentine specimens were infected intraorally using a removable orthodontic device. Five samples were used for each irrigant solution: 2% chlorhexidine, 1% sodium hypochlorite (NaOCl), 10% citric acid, 17% EDTA and distilled water. The solutions were used for 5 min. The samples were stained using the Live/Dead technique and evaluated using a confocal microscope. Differences in the amount of total biovolume (µm(3)), number of surviving cells (µm(3)), mean biofilm thickness (µm) and substratum coverage (%) of the treated biofilms were determined using nonparametric statistical tests (P < 0.05). RESULTS: Similar values of biovolume total, biovolume of live subpopulations and substratum coverage were found in 2% chlorhexidine, 10% citric acid, 17% EDTA and distilled water-treated biofilms (P > 0.05). The lower values of the studied parameters were found in 1% NaOCl-treated dentine (P < 0.05) with the exception of the mean biofilm height criteria that did not reveal significant differences amongst the irrigant solutions (P > 0.05). CONCLUSIONS: One per cent sodium hypochlorite was the only irrigant that had a significant effect on biofilm viability and architecture.

Analysis of four gutta-percha techniques used to fill mesial root canals of mandibular molars.

AIM: To compare the percentage of gutta-percha, sealer and voids and the influence of isthmuses in mesial root canals of mandibular molars filled with different techniques. METHODOLOGY: Canals in 60 mesial roots of mandibular first molars were prepared with ProTaper instruments to size F2 (size 25, 0.08 taper) and filled using a single-cone, lateral compaction, System B or Thermafil techniques. An epoxy resin sealer was labelled with Rhodamine-B dye to allow analysis under a confocal microscope. The percentage of gutta-percha, sealer and area of voids was calculated at 2, 4 and 6 mm from the apex, using Image Tool 3.0 software. Statistical analysis was performed using nonparametric Kruskal-Wallis and Dunn tests (P < 0.05). The influence of isthmuses on the presence or absence of voids was evaluated using the Fisher test. RESULTS: At the 2 mm level, the percentage of gutta-percha, sealer and voids was similar amongst the System B, lateral compaction and single-cone techniques. The single-cone technique revealed significantly less gutta-percha, more sealer and voids in comparison with the Thermafil technique at the 2 and 4 mm level (P < 0.05). The analysis of all sections (2, 4 and 6 mm) revealed that more gutta-percha and less sealer and voids were found in root canals filled with Thermafil and System B techniques (P < 0.05). The Fisher test revealed that the presence of isthmuses increased the occurrence of voids in the lateral compaction group only (P < 0.05). CONCLUSION: Gutta-percha, sealer filled area and voids were dependent on the canal-filling technique. The presence of isthmuses may influence the quality of root filling.

Analysis of the gutta-percha filled area in C-shaped mandibular molars obturated with a modified MicroSeal technique.

AIM: To analyse the gutta-percha filled area of C-shaped molar teeth root filled with the modified MicroSeal technique with reference to the radiographic features and the C-shaped canal configuration. METHODOLOGY: Twenty-three mandibular second molar teeth with C-shaped roots were classified according to their radiographic features as: type I--merging, type II--symmetrical and type III--asymmetrical. The canals were root filled using a modified technique of the MicroSeal system. Horizontal sections at intervals of 600 mum were made 1 mm from the apex to the subpulpal floor level. The percentage of gutta-percha area from the apical, middle and coronal levels of the radiographic types was analysed using the Kruskal-Wallis test. Complementary analysis of the C-shaped canal configurations (C1, C2 and C3) determined from cross-sections from the apical third was performed in a similar way. RESULTS: No significant differences were found between the radiographic types in terms of the percentage of gutta-percha area at any level (P > 0.05): apical third, type I: 77.04%, II: 70.48% and III: 77.13%, middle third, type I: 95.72%, II: 93.17%, III: 91.13% and coronal level, type I: 98.30%, II: 98.25%, III: 97.14%. Overall, the percentage of the filling material was lower in the apical third (P < 0.05). No significant differences were found between the C-shaped canal configurations apically; C1: 72.64%, C2: 79.62%, C3: 73.51% (P > 0.05). CONCLUSIONS: The percentage of area filled with gutta-percha was similar in the three radiographic types and canal configuration categories of C-shaped molars. These results show the difficulty of achieving predictable filling of the root canal system when this anatomical variation exists. In general, the apical third was less completely filled.