Novel chelate-setting calcium-phosphate cements fabricated with wet-synthesized hydroxyapatite powder.

The hydroxyapatite (HAp) powder preparation process was optimized to fabricate inositol phosphate-HAp (IP6-HAp) cement with enhanced mechanical properties. Starting HAp powders were synthesized via a wet chemical process. The effect of the powder preparation process on the morphology, crystallinity, median particle size, and specific surface area (SSA) of the cement powders was examined, together with the mechanical properties of the resulting cement specimens. The smallest crystallite and median particle sizes, and the highest SSA were obtained from ball-milling of as-synthesized HAp powder under wet conditions and then freeze-drying. IP6-HAp cement fabricated with this powder had a maximum compressive strength of 23.1 ± 2.1 MPa. In vivo histological studies using rabbit models revealed that the IP6-HAp cements were directly in contact with newly formed and host bones. Thus, the present chelate-setting HAp cement is promising for application as a novel paste-like artificial bone.

Development of thermo-mechanical processing for fabricating highly durable ß-type Ti-Nb-Ta-Zr rod for use in spinal fixation devices.

The mechanical strength of a beta titanium alloy such as Ti-Nb-Ta-Zr alloy (TNTZ) can be improved significantly by thermo-mechanical treatment. In this study, TNTZ was subjected to solution treatment, cold caliber rolling, and cold swaging before aging treatment to form a rod for spinal fixation. The {110}(ß) are aligned parallel to the cross-section with two strong peaks approximately 180° apart, facing one another, in the TNTZ rods subjected to cold caliber rolling and six strong peaks at approximately 60° intervals, facing one another, in the TNTZ rods subjected to cold swaging. Therefore, the TNTZ rods subjected to cold swaging have a more uniform structure than those subjected to cold caliber rolling. The orientation relationship between the α and ß phases is different. A [110](ß)//[121](α), (112)(ß)//(210)(α) orientation relationship is observed in the TNTZ rods subjected to aging treatment at 723 K after solution treatment and cold caliber rolling. On the other hand, a [110](ß)//[001](α), (112)(ß)//(200)(α) orientation relationship is observed in TNTZ rod subjected to aging treatment at 723 K after cold swaging. A high 0.2% proof stress of about 1200 MPa, high elongation of 18%, and high fatigue strength of 950 MPa indicate that aging treatment at 723 K after cold swaging is the optimal thermo-mechanical process for a TNTZ rod.

Siloxane-poly(lactic acid)-vaterite composites with 3D cotton-like structure.

Trace amounts of ionic calcium and silicon species have been reported to stimulate the proliferation, differentiation, and mineralization of bone-forming cells. Composite materials comprising siloxane-doped calcium carbonate (vaterite) particles and poly(L-lactic acid) have been developed [siloxane-poly(lactic acid)-vaterite hybrid-composite, SiPVH] so far; they were designed such that calcium and silicate ions are gradually released from SiPVH and they show the chronic effects of ions on cellular activities. In the present work, SiPVH with a 3D cotton-like structure was prepared by electrospinning to obtain the major advantages of excellent bioactivity and ease of handling for bone filling surgery. The diameter of the fibrous skeletons that form structure of the cotton-like SiPVH was controlled to ~10 µm to achieve cellular migration into the spaces between fibers. The resulting cotton-like SiPVH showed good flexibility. The fiber surface was coated rapidly with numerous particles of several hundred nanometers in size by alternate soaking in CaCl(2) and Na(2)HPO(4). The treated cotton-like material, which released calcium and silicate ions gradually, showed good cellular migration behavior into the 3D structure in cell culture tests using murine osteoblast-like MC3T3-E1 cells.