Analytical quality by design-based development of a capillary electrophoresis method for Omeprazole impurity profiling.

Omeprazole (OME) is a proton pump inhibitor used to treat gastroesophageal reflux disease associated conditions. The current study presents an Analytical Quality by Design-based approach for the development of a CE method for OME impurity profiling. The scouting experiments suggested the selection of solvent modified Micellar ElectroKinetic Chromatography operative mode using a pseudostationary phase composed of sodium dodecyl sulfate (SDS) micelles and n-butanol as organic modifier in borate buffer. A symmetric three-level screening matrix 37//16 was used to evaluate the effect of Critical Method Parameters, including Background Electrolyte composition and instrumental settings, on Critical Method Attributes (critical resolution values, OME peak width and analysis time). The analytical procedure was optimized using Response Surface Methodology through a Central Composite Orthogonal Design. Risk of failure maps made it possible to define the Method Operable Design Region, within which the following optimized conditions were selected: 72 mM borate buffer pH 10.0, 96 mM SDS, 1.45 %v/v n-butanol, capillary temperature 21 °C, applied voltage 25 kV. The method was validated according to ICH guidelines and robustness was evaluated using a Plackett-Burman design. The developed procedure enables the simultaneous determination of OME and seven related impurities, and has been successfully applied to the analysis of pharmaceutical formulations.

Innovative Reversed-Phase Chromatography Platform Approach for the Fast and Accurate Characterization of Membrane Vesicles' Protein Patterns.

Outer membrane vesicles (OMVs) have been widely explored to develop vaccine candidates for bacterial pathogens due to their ability to combine adjuvant properties with immunogenic activity. OMV expresses a variety of proteins and carbohydrate antigens on their surfaces. For this reason, there is an analytical need to thoroughly characterize the species expressed at their surface: we here present a simple and accurate reversed-phase ultrahigh-performance liquid chromatography (RP-UPLC) method developed according to quality by design principles. This work provides an analytical alternative to the classical sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) characterization. The higher selectivity and sensitivity of the RP-UHPLC assay allow for the identification of additional protein species with respect to SDS-PAGE and facilitate its precise relative abundance quantification. According to validation results, the assay showed high accuracy, linearity, precision, repeatability, and a limit of quantification of 1% for less abundant proteins. This performance paves the way for improved production campaign consistency while also being analytically simple (no sample pretreatment required), making it suitable for routine quality control testing. In addition, the applicability of the assay to a wider range of vesicle classes (GMMA) was demonstrated.

Optimization of hydrolysis conditions of amino acid analysis for UHPLC-UV antigens content determination: Bexsero vaccine a case study.

In the present study the compositional analysis of the amino acids released by the acidic hydrolysis of the vaccine antigens was approached as an alternative to the dye-binding methods, for improvement of the quality control. In particular, the Analytical Quality by Design principles were undertaken in optimizing the hydrolysis conditions of the antigens to be applied prior to the quantitation by UHPLC-UV. Bexsero was used as a case study; it is a recombinant meningococcal B vaccine and one of its critical quality attributes is the content of the three core protein antigens, namely Neisseria Heparin Binding Antigen, factor H binding protein and Neisseria adhesin A, in the final formulation. Conventionally, the proteins quantitation is carried out by dye-binding assays. Analytical Target Profile was defined as the accurate determination of amounts of the Bexsero antigens. The Critical Method Parameters were chosen by means of the cause-effect matrix. A Face Centered Design was used to select the experiments to investigate the process and finally a Method Operable Design Region with a risk of failure of 5% was defined. The selected working point for routine use was: hydrolysis time, 17 hrs; temperature, 112 °C; 6 M HCl volume, 300 µl; antioxidant 90% phenol volume, 5 µl.

Analysis of Volatile Hydrocarbons (Pentene Dimers and Terpenes) in Extra Virgin Olive Oil: Optimization by Response Surface Methodology and Validation of HS-SPME-GC-MS Method.

A head space-solid phase microextraction-gas chromatography-mass spectrometery (HS-SPME-GC-MS) method for the simultaneous analysis of pentene dimers from lipoxygenase (LOX) pathway, monoterpenes, and sesquiterpenes in extra virgin olive oil (EVOO) was proposed. A Doehlert design was performed; the conditions of the HS-SPME preconcentration step (extraction temperature, extraction time, sample amount, and desorption time) were optimized by response surface methodology, allowing defining the method operable design region. A quantitative method was set up using the multiple internal standard normalization approach: four internal standards were used, and the most suitable one was selected for area normalization of each external standard. The quantitative method was successfully validated and applied to a series of monocultivar EVOOs. This is the first paper in which a quantitative method using commercial standards has been proposed for the analysis of an important class of molecules of EVOO such as pentene dimers. The optimized method is suitable for routine analysis aimed at characterizing high quality EVOOs.

Innovative thermally assisted on-line solid phase extraction-reversed phase liquid chromatography applied to targeted nutrimetabolomics in human biofluids.

In this study, the use of thermal desorption in on-line solid phase extraction coupled with reversed phase liquid chromatography (on-line SPE-LC) was for the first time proposed and demonstrated for the desorption of analytes strongly retained by multiple interaction polymeric sorbents. In detail, this analytical strategy was applied to the on-line SPE-LC targeted analysis of a model set of 34 human gut metabolites characterized by heterogeneous physicochemical properties (i.e., octanol-water partition coefficient in the range -0.3 - 3.4). The novel thermally assisted on-line SPE approach was investigated in comparison to conventional room temperature desorption strategies based on the use of (i) an optimized elution gradient or (ii) organic desorption followed by post-cartridge dilution. The thermally assisted desorption strategy has been shown to be better performing and suitable for the development of a reliable and sensitive method for the analysis of the model group of analytes in urine and serum. In more detail, under the optimized experimental conditions, the proposed method provided negligible matrix effects in both biofluids for almost all target analytes. Moreover, method quantification limits were in the ranges 0.026-7.2 µg L-1 and 0.033-23 µg L-1 for urine and serum, respectively, i.e., comparable to or lower than those reported in methods previously published.

Analytical Quality by Design-Compliant Development of a Cyclodextrin-Modified Micellar ElectroKinetic Chromatography Method for the Determination of Trimecaine and Its Impurities.

In 2022, the International Council for Harmonisation released draft guidelines Q2(R2) and Q14, intending to specify the development and validation activities that should be carried out during the lifespan of an analytical technique addressed to assess the quality of medicinal products. In the present study, these recommendations were implemented in Capillary Electrophoresis method development for the quality control of a drug product containing trimecaine, by applying Analytical Quality by Design. According to the Analytical Target Profile, the procedure should be able to simultaneously quantify trimecaine and its four impurities, with specified analytical performances. The selected operative mode was Micellar ElectroKinetic Chromatography employing sodium dodecyl sulfate micelles supplemented with dimethyl-ß-cyclodextrin, in a phosphate-borate buffer. The Knowledge Space was investigated through a screening matrix encompassing the composition of the background electrolyte and the instrumental settings. The Critical Method Attributes were identified as analysis time, efficiency, and critical resolution values. Response Surface Methodology and Monte Carlo Simulations allowed the definition of the Method Operable Design Region: 21-26 mM phosphate-borate buffer pH 9.50-9.77; 65.0 mM sodium dodecyl sulfate; 0.25-1.29% v/v n-butanol; 21-26 mM dimethyl-ß-cyclodextrin; temperature, 22 °C; voltage, 23-29 kV. The method was validated and applied to ampoules drug products.

Millet Fermented by Different Combinations of Yeasts and Lactobacilli: Effects on Phenolic Composition, Starch, Mineral Content and Prebiotic Activity.

Millet is the sixth-highest yielding grain in the world and a staple crop for millions of people. Fermentation was applied in this study to improve the nutritional properties of pearl millet. Three microorganism combinations were tested: Saccharomyces boulardii (FPM1), Saccharomyces cerevisiae plus Campanilactobacillus paralimentarius (FPM2) and Hanseniaspora uvarum plus Fructilactobacillus sanfranciscensis (FPM3). All the fermentation processes led to an increase in minerals. An increase was observed for calcium: 254 ppm in FPM1, 282 ppm in FPM2 and 156 ppm in the unfermented sample. Iron increased in FPM2 and FPM3 (approx. 100 ppm) with respect the unfermented sample (71 ppm). FPM2 and FPM3 resulted in richer total phenols (up to 2.74 mg/g) compared to the unfermented sample (2.24 mg/g). Depending on the microorganisms, it was possible to obtain different oligopeptides with a mass cut off ≤10 kDalton that was not detected in the unfermented sample. FPM2 showed the highest resistant starch content (9.83 g/100 g) and a prebiotic activity on Bifidobacterium breve B632, showing a significant growth at 48 h and 72 h compared to glucose (p < 0.05). Millet fermented with Saccharomyces cerevisiae plus Campanilactobacillus paralimentarius can be proposed as a new food with improved nutritional properties to increase the quality of the diet of people who already use millet as a staple food.

New Trends in the Quality Control of Enantiomeric Drugs: Quality by Design-Compliant Development of Chiral Capillary Electrophoresis Methods.

Capillary electrophoresis (CE) is a potent method for analyzing chiral substances and is commonly used in the enantioseparation and chiral purity control of pharmaceuticals from different matrices. The adoption of Quality by Design (QbD) concepts in analytical method development, optimization and validation is a widespread trend observed in various analytical approaches including chiral CE. The application of Analytical QbD (AQbD) leads to the development of analytical methods based on sound science combined with risk management, and to a well understood process clarifying the influence of method parameters on the analytical output. The Design of Experiments (DoE) method employing chemometric tools is an essential part of QbD-based method development, allowing for the simultaneous evaluation of experimental parameters as well as their interaction. In 2022 the International Council for Harmonization (ICH) released two draft guidelines (ICH Q14 and ICH Q2(R2)) that are intended to encourage more robust analytical procedures. The ICH Q14 guideline intends to harmonize the scientific approaches for analytical procedures' development, while the Q2(R2) document covers the validation principles for the use of analytical procedures including the recent applications that require multivariate statistical analyses. The aim of this review is to provide an overview of the new prospects for chiral CE method development applied for the enantiomeric purity control of pharmaceuticals using AQbD principles. The review also provides an overview of recent research (2012-2022) on the applicability of CE methods in chiral drug impurity profiling.

Assessment of bioaccumulation of glyphosate and aminomethylphosphonic acid in marine mussels using capillary electrophoresis with light-emitting diode-induced fluorescence detection.

Glyphosate or N-(phosphonomethyl)glycine, widely used as herbicide in agriculture to control weeds and to facilitate harvesting, has been included in Group 2A pollutants (probably carcinogenic to humans) by the International Agency for Research on Cancer (IARC). In intensive agricultural areas, runoff and soil leaching are likely to drive glyphosate to surface waters, where the compound is often detected together with its main microbial metabolite, aminomethylphosphonic acid (AMPA). In the present study a method based on capillary electrophoresis coupled with light-emitting diode-induced fluorescence detection has been developed and validated for the determination of the two compounds in whole soft mass of marine mussels (Mytilus galloprovincialis). The method is based on the acidic hydrolysis of lyophilized tissue using 6 M HCl (oven at 110 °C for 22 h) to release the target analytes; their subsequent derivatization using 4-fluoro-7-nitro-2,1,3-benzoxadiazole, was found to be suitable for the sensitive fluorescence detection. To achieve optimum separation of the analytes from the matrix and degradation reagent interferences, the background electrolyte constituted by borate buffer (pH 9.2, 30 mM) was supplemented with 10 mM heptakis(2,6-di-O-methyl)-ß-cyclodextrin. The method was validated for linearity, precision, accuracy, robustness and sensitivity showing LOQ of 0.2 and 1.0 µg/g in fresh tissues, for AMPA and glyphosate, respectively; the recovery values ranged within 88.5 - 94.6% for glyphosate and 70.4 - 76.6% for AMPA. Experimental samples of Mediterranean mussels M. galloprovincialis treated with 100 µg/L or 500 µg/L of both glyphosate and AMPA, showed a dose dependent bioaccumulation of the compounds reaching maximum level of 77.0 µg/g and 11.3 µg/g of AMPA and glyphosate, respectively. The study demonstrates for the first time M. galloprovincialis as potential sentinel organisms for the environmental occurrence of these small amphoteric pollutants.

Quality by Design in optimizing the extraction of (poly)phenolic compounds from Vaccinium myrtillus berries.

Quality by Design was adopted for developing an effective extraction procedure of (poly)phenolic compounds from bilberry (Vaccinium myrtillus L.) fruits, using a pooled sample of berries from different regions of Ukraine. Mechanical solvent extraction, microwave-assisted extraction (MAE) and ultrasonic-assisted extraction (UAE) were investigated by screening matrices. Extraction time (Time, from 5 to 15 min), organic solvent type (OS type, methanol, ethanol and acetone), organic solvent percentage (OS%, from 50% to 90%), sample/extractant ratio (S/E ratio, from 0.025 to 0.1 g mL-1), and, only for MAE, extraction temperature (T, from 30 to 60°C), were selected as critical method parameters (CMPs). The spectrophotometric assays total soluble polyphenols (TSP), total monomeric anthocyanins (TMA), and radical scavenging activity (evaluated by the 2,2-diphenyl-1-picrylhydrazyl radical (DPPH), the 2,2'-azino-di-(3-ethylbenzthiazoline sulfonic acid), and the ferric reducing antioxidant power methods) were chosen as critical method attributes (CMAs). The screening procedure allowed for selecting UAE and methanol, while the other CMPs underwent further optimization through Response Surface Methodology. Target values for TSP, TMA and DPPH were selected and the method operable design region (MODR) was defined by means of Monte-Carlo simulations. The optimized conditions, with the corresponding MODR intervals in bracket, were the following: (i) Time, 17 min (15-23 min); OS%, 56% (44-59%); S/E ratio, 0.030 (0.022-0.034) g mL-1. Under these experimental conditions, CMAs values of the pooled sample were the following (n = 3): TSP=4433±176 mg (+)-catechin eq/100 g dry weight (d.w.); TMA=3575±194 mg cyanidin-3-glucoside eq/100 g d.w.; DPPH=273±5 µg DPPH inhib./mg d.w. The optimized extraction method was tested for matrix effect (ME%) in the UHPLC-MS/MS analysis of 15 anthocyanins and 20 non-anthocyanins individual (poly)phenols commonly found in bilberries, as well as for luteolin, sinapic acid, and pelargonidin-3-glucoside, absent in this fruit and therefore added to the extracts as surrogate standards for evaluating apparent recovery (AR%). |ME%| was in any case ≤ 23% and AR% of the surrogate standards in the range 91-95%, confirming the very good performances of the optimized extraction method.

Application of Experimental Design Methodologies in the Enantioseparation of Pharmaceuticals by Capillary Electrophoresis: A Review.

Chirality is one of the major issues in pharmaceutical research and industry. Capillary electrophoresis (CE) is an interesting alternative to the more frequently used chromatographic techniques in the enantioseparation of pharmaceuticals, and is used for the determination of enantiomeric ratio, enantiomeric purity, and in pharmacokinetic studies. Traditionally, optimization of CE methods is performed using a univariate one factor at a time (OFAT) approach; however, this strategy does not allow for the evaluation of interactions between experimental factors, which may result in ineffective method development and optimization. In the last two decades, Design of Experiments (DoE) has been frequently employed to better understand the multidimensional effects and interactions of the input factors on the output responses of analytical CE methods. DoE can be divided into two types: screening and optimization designs. Furthermore, using Quality by Design (QbD) methodology to develop CE-based enantioselective techniques is becoming increasingly popular. The review presents the current use of DoE methodologies in CE-based enantioresolution method development and provides an overview of DoE applications in the optimization and validation of CE enantioselective procedures in the last 25 years. Moreover, a critical perspective on how different DoE strategies can aid in the optimization of enantioseparation procedures is presented.

A simple and selective electrochemical magneto-assay for sea lice eDNA detection developed with a Quality by Design approach.

Environmental DNA (eDNA) is a novel, non-invasive sampling procedure that allows the obtaining of genetic material directly from environmental samples without any evidence of biological sources. The eDNA methodology can greatly benefit from coupling it to reliable, portable and cost-effective tools able to perform decentralized measurements directly at the site of need and in resource-limited settings. Herein, we report a simple method for the selective analysis of eDNA using a magneto-assay with electrochemical detection. The proposed method involves the polymerase chain-reaction (PCR) amplification of mitochondrial eDNA of parasitic Salmon lice (Lepeophtheirus salmonis), extracted from seawater samples. The eDNA sequence was targeted via sandwich hybridization onto magnetic beads and enzymatic labeling was performed to obtain an electroactive product measured by differential pulse voltammetry. Quality by Design (QbD), a recent concept of science- and risk-oriented quality paradigm, was used for the optimization of the different parameters of the assay. Response surface methodology and Monte Carlo simulations were performed to define the method operable design region. The optimized electrochemical magneto-assay attained a limit of detection of 2.9 amol µL-1 of the short synthetic sea louse DNA analogue (43 bp). In addition, robustness testing using a further experimental design approach was performed for monitoring eDNA amplicons. Seawater samples spiked with individuals of free-swimming L. salmonis copepodite stages and seawater collected from tanks with sea lice-infested fish were analyzed.

Analytical quality by design in the development of a solvent-modified micellar electrokinetic chromatography method for the determination of sitagliptin and its related compounds.

A solvent-modified micellar electrokinetic chromatography method was developed following the Quality by Design approach for the simultaneous determination of sitagliptin (SIT), an oral antihyperglycemic drug, and its main impurities derived from the synthesis process. The separation system was identified in the scouting phase and was made by sodium dodecyl sulphate (SDS) micelles with the addition of n-butanol and methanol. The knowledge space was investigated through an asymmetric screening matrix, taking into consideration eight critical method parameters (CMPs) involving the composition of the background electrolyte in terms of buffer concentration and pH, the concentration of surfactants and organic modifiers, and voltage. The critical method attributes (CMAs) were identified as analysis time and the distance between the tail of the electroosmotic flow system peak and the front edge of impurity I1 (sitagliptin triazole hydrochloride). A Box-Behnken Design was used in response surface methodology for calculating the quadratic models relating the CMPs to the CMAs. From the models it was possible to compute the method operable design region (MODR) through Monte-Carlo simulations. The MODR was identified in the probability maps as the multidimensional zone where the risk of failure to achieve the desired values for the CMAs was lower than 10 %. The experimental conditions corresponding to the working point, with the MODR interval, were the following: background electrolyte, 14 (10-18) mM borate buffer pH 9.20, 100 mM SDS, 13.6 (11.1-16.0) %v/v n-butanol, 6.7 (4.5-8.8) %v/v methanol; voltage and temperature were set to 28 kV and 22 °C, respectively. The developed CE method was validated in accordance with International Council for Harmonisation guidelines and was applied to the analysis of SIT tablets. The routine analysis for the quality control of the pharmaceutical product could be conducted in about 11 min.

Quality by design optimization of a liquid chromatographic-tandem mass spectrometric method for the simultaneous analysis of structurally heterogeneous pharmaceutical compounds and its application to the rapid screening in wastewater and surface water samples by large volume direct injection.

This study focused on the Analytical Quality by Design (AQbD) optimization of the chromatographic separation and mass spectrometric detection of a wide group of structurally heterogeneous model pharmaceutical compounds (PhCs) and transformation products (TPs), chosen to cover the challenging issues of the co-presence of compounds characterized by (i) a wide range of physicochemical properties, (ii) the same mass transitions, and (iii) different ionisation modes. Italian consumption of PhCs were also considered as election criteria of target analytes. Octadecyl and pentafluorophenyl stationary phases, acetonitrile/methanol ratios and acidity of the eluents, column temperature, initial organic phase percentage, and elution gradient were investigated by AQbD, aiming at optimizing critical resolutions, sensitivities, and analysis time. Statistically significant models were obtained in most cases with fitting and cross-validation coefficients in the ranges of 0.681-0.998 and 0.514-0.967, respectively. After optimization, the analysis of target analytes was performed in a single chromatographic run, adopting a mixed acquisition mode based on scheduled acquisition windows comprising both single polarity and continuous polarity switching. For most investigated analytes the method provided detection limits in the sub-ng/L to low ng/L range, meeting for macrolides the sensitivity requested by the "Watch List" 2018/840/EU. The optimized method was applied to the direct injection analysis of PhCs and TPs in four wastewater treatment plant (WWTP) effluents and surface water (SW) samples collected in the receiving water bodies. Absolute values of matrix effect were found to be far higher than 20% for most target analytes in most samples. Seventeen PhCs and two TPs were quantified in at least one sample, at the wide concentration range of about 1-3200 ng/L. The most occurring PhCs in both WWTP effluents and SWs were levofloxacin (202-1239 and 100-830 ng/L), furosemide (865-3234 and 230-880 ng/L), ketoprofen (295-1104 and 270-490 ng/L), and ibuprofen (886-3232 and 690-1440 ng/L).

Development of novel cocrystal-based active food packaging by a Quality by Design approach.

A way to reduce food waste is related to the increase of the shelf-life of food as a result of improving the package type. An innovative active food packaging material based on cocrystallization of microbiologically active compounds present in essential oils i.e. carvacrol, thymol and cinnamaldehyde was developed following the Quality by Design principles. The selected active components were used to produce antimicrobial plastic films with solidified active ingredients on their surface characterized by antimicrobial properties against four bacterial strains involved in fruit and vegetable spoilage. The developed packaging prototypes exhibited good antimicrobial activity in vitro providing inhibition percentage of 69 (±15)% by contact and inhibition diameters of 32 (±6) mm in the gas phase, along with a prolonged release of the active components. Finally, the prolonged shelf-life of grape samples up to 7 days at room temperature was demonstrated.

Optimization and validation of a method based on QuEChERS extraction and liquid chromatographic-tandem mass spectrometric analysis for the determination of perfluoroalkyl acids in strawberry and olive fruits, as model crops with different matrix characteristics.

A QuEChERS method was optimized and validated for the LC-MS/MS analysis of perfluoro-n-pentanoic acid (PFPeA), perfluoro-1-butanesulfonic acid (PFBuS), perfluoro-n-hexanoic acid (PFHxA), perfluoro-n-heptanoic acid (PFHpA), perfluoro-1-hexanesulfonic acid (PFHxS), perfluoro-n-octanoic acid (PFOA), perfluoro-n-nonanoic acid (PFNA), perfluoro-1-octanesulfonic acid (PFOS) and perfluoro-n-decanoic acid (PFDA) in freeze-dried strawberry and olive, as model fruits characterized by very different chemical compositions. The method was evaluated for apparent recovery, intra-day and inter-day precision, matrix effect and recovery. The method optimized for strawberry provided for most compounds absolute values of matrix effect (|ME%|) ≤ 11%, except for PFHxA, which showed a signal suppression of 22%. The extraction efficiency was tested at the spike levels 500-5000 pg/g d.w. for PFPeA, PFBuS, and PFHxA, and 100-1000 pg/g d.w. for the other target analytes, evidencing as a whole recoveries in the range of 65-89%. For olive fruits, due to their high fat content, an ultrasound-assisted extraction was necessary to obtain an efficient sample disgregation so as to increase the extraction yield and its precision. Moreover, a d-SPE clean-up with GCB allowed to achieve |ME%| ≤ 8% (except for PFBuS, which showed a signal enhancement of 19%) and recoveries calculated at the aforementioned spike levels were in the range 75-97%. The two methods provided very good linearity (R2 ≥ 0.9984) from 10,000 pg/g down to compound specific quantification limits, which were included in the ranges of 2.9-393 pg/g and 2.6-127 pg/g for strawberry and olive fruit, respectively. The methods were applied to the analysis of PFAAs in strawberry and olive fruits commercially available in two Italian supermarkets, as well as obtained under irrigation with various treated wastewaters (TWWs), evidencing in both cases a higher PFAAs occurrence in olives than in strawberry. However, PFAAs concentrations determined in the investigated fruit matrixes were quite low, being their sum 1.9 ng/g d.w. in the worst case (i.e. olive fruits grown under irrigation with TWWs).

Optimized hydrolytic methods by response surface methodology to accurately estimate the phenols in cereal by HPLC-DAD: The case of millet.

Extraction of free and bound phenols from millet in acidic and basic hydrolytic conditions were compared for the first time. Acidic hydrolysis was able to extract the highest amount of total phenolic compounds (up to 178 mg/100 g) while the basic hydrolysis underestimates the phenolic concentration. Our findings pointed out for the first time that methyl ferulate is naturally present as bound phenol in millet. Response Surface Methodology was then applied to both acidic and basic hydrolytic extractive conditions: the acidic procedure, optimized in terms of extractive time and temperature and concentration of the acidic mean, gave the best results, allowing definition of Method Operable Design Region and quantitation of the total amount of phenols in millet samples in a single extractive step. This optimized method is suitable for further accurate investigations of the typical phenols of the numerous varieties of this recently re-discovered minor cereal.

Physicochemical properties and sorption capacities of sawdust-based biochars and commercial activated carbons towards ethoxylated alkylphenols and their phenolic metabolites in effluent wastewater from a textile district.

Three biochars were produced using sawdust from waste biomass, via a simple pyrolysis thermal conversion at 450, 650, and 850 °C (BC450, BC650, and BC850), without any activation process. These materials, together with vegetal and mineral commercial activated carbons (VAC and MAC), were characterized for their elemental composition, Brunauer-Emmett-Teller surface area, t-plot microporosity and Barrett-Joyner-Halenda mesoporosity. Moreover, iodine, phenol and methylene blue porosity indexes were measured. The materials were also evaluated for their pH of the point of zero charge, as well as near-surface chemical composition and surface functionality by means of X-ray photoelectron and Fourier-transform infrared spectroscopy. Ash content, water-extractable metals and polycyclic aromatic hydrocarbons (PAHs) were also determined. BC650 showed a much higher surface area (319 m2 g-1) compared to BC450 (102 m2 g-1), as well as an increase in aromatization and the residual presence of functional polar groups. BC850 exhibited a loss of polar and aromatic groups, with the dominance of graphitic carbon and the highest value of surface area (419 m2 g-1). Biochars comply with the EN 12915-1/2009 limits for metal and PAH release in water treatment. Biochars and MAC were tested using Langmuir and Freundlich isotherms for the sorption in real effluent wastewater of a mixture of 14 branched ethoxylated 4-t-octyl and 4-nonylphenols, as well as 4-t-octyl and 4-nonylphenol, the latter representing persistent, endocrine disrupting contaminants, widespread in the effluents from wastewater treatment plants and listed as priority/priority hazardous substances in the Directive 2013/39/EU. Biochars showed a lower sorption efficiency compared to MAC. The best performance was found for BC650 towards the alkylphenols (9-13 times less efficient than the MAC). Considering the lower market price of biochar compared to MAC (estimated as at least 16 times less expensive by a small market survey), the former can be considered more competitive than the latter.

Quality by Design as a risk-based strategy in pharmaceutical analysis: Development of a liquid chromatography-tandem mass spectrometry method for the determination of nintedanib and its impurities.

Nintedanib (NIN) is a tyrosine kinase inhibitor recently approved for the treatment of idiopathic pulmonary fibrosis. As a new drug, no monograph is available so far in official compendia. A liquid chromatography-tandem mass spectrometry method is presented for the simultaneous determination of NIN and its seven potential impurities. The risk-based approach of Analytical Quality by Design was applied in method development. The critical method parameters (CMPs) were the type of organic solvent in the mobile phase, formic acid percentage, column flow rate, oven temperature, gradient slope of organic eluent. The critical method attributes (CMAs) were selected as analysis time and selectivity between the main compound NIN and the adjacent peaks. Design of Experiments methodology was effectively employed for establishing the relationship between the CMPs and the CMAs. In the scouting step, a Restek Ultra AQ C18 (100 × 2.1 mm, 2.7 µm) core-shell column was selected, and then the effects of different levels of the five CMPs on the CMAs were evaluated by means of a 35//16 symmetric screening matrix. A Box-Behnken Design made it possible to obtain detailed maps of predicted CMAs throughout the investigated experimental domain, pointing out the presence of interaction and quadratic effects. The probability of meeting the specifications for the CMAs was calculated by Monte-Carlo simulations, performing a risk analysis and drawing risk of failure maps, which were used to visualize and define the method operable design region (MODR) with a probability π ≥ 90%. The final working conditions (enclosing the MODR interval) were as follows: methanol as organic solvent; formic acid percentage, 0.15% v/v; flow rate, 0.40 mL min-1 (0.37-0.43 mL min-1); oven temperature, 40 °C (38-40 °C); gradient slope of organic eluent, 14.00% eluent B min-1 (12.85-15.15% eluent B min-1). The resulting analysis time was about 10 min. Validation was carried out according to International Council for Harmonisation guidelines and the optimized method was applied to the analysis of NIN soft capsules for quality control purposes.

Quantitative amino acids profile of monofloral bee pollens by microwave hydrolysis and fluorimetric high performance liquid chromatography.

Bee pollen is an attractive resource in the field of alternative remedies and thanks to the content of carbohydrates, crude fibers, proteins and lipids must be considered as a supplementary food of high potential rate. In characterization of bee pollen with the aim to define its value in human nutrition, the amino acids profile is one of the most important attributes. In the present study, the determination of amino acids composition of different monofloral bee pollen samples was obtained by an approach combining microwave acidic hydrolysis (60 min at 150 °C instead of 22 h at 120 °C in conventional oven) followed by derivatization using 9-fluorenylmethylchloroformate (FMOC-Cl) and separation of amino acids derivatives using a Phenomenex Kinetex core-shell 5 µm C18 (150 x 4.6 mm i.d.) column under a ternary gradient elution. Separation of 19 amino acids was achieved in about 40 min and fluorimetric detection (λexc = 265 nm λem = 315 nm) allowed selective and sensitive quantitation with LOQ values ranging within 0.14-3.00 µg/mL. Interestingly, the present approach allowed determination of some amino acids e.g., tryptophan and trans-4-hydroxyproline that are often lost by other methods of analysis. Significant differences in the composition of the considered samples were found confirming the impact of botanical origin of the product on its nutritional value. Principal Component Analysis was applied to treat the obtained data, highlighting the importance for discrimination, of detecting low abundance amino acids. The proposed method can be used as an advantageous alternative to the existing ones for characterization of bee pollen as an important source of dietary proteins.