Ink synthesis and inkjet printing of electrostatically stabilized multilayer graphene nanoshells.

HYPOTHESIS: Most functional inkjet inks are sterically stabilized nanoparticle dispersions that require a post-printing-process to remove stabilizing materials and gain functionality. This post-process limits material selection and increases fabrication time and complexity for printed devices. By optimizing the electrostatic stability of a carbon nanomaterial dispersed in water or ethylene glycol via pH adjustment, a stable and printable ink should be attainable without a steric stabilizing material and hence the post-process may be avoided. EXPERIMENTS: The electrostatic stability of multilayer graphene nanoshells (MGNS)-an inexpensive and net carbon-negative nanomaterial-dispersed in water and ethylene glycol was studied by measuring zeta potential as a function of pH and modeling energetic potentials between particles. Requirements for electrical percolation of printed MGNS were analyzed and corroborated with electrical measurements. FINDINGS: Electrostatic stability improved with increased zeta potential caused by an increased pH. Ionic strength also increased with pH, causing strong destabilization. By increasing zeta potential while minimizing ionic strength, the maximum solid-loading of MGNS in DI water and ethylene glycol was increased up to 20%. For the MGNS solid-loading achieved here, electrical percolation occurs with 20-30 consecutively printed layers producing a resistivity of 30 Ω-cm. The inexpensive, environmentally-friendly MGNS are a promising material for printed, flexible electronics.

Electric Field Assisted Self-Assembly of Viruses into Colored Thin Films.

Filamentous viruses called M13 bacteriophages are promising materials for devices with thin film coatings because phages are functionalizable, and they can self-assemble into smectic helicoidal nanofilament structures. However, the existing "pulling" approach to align the nanofilaments is slow and limits potential commercialization of this technology. This study uses an applied electric field to rapidly align the nanostructures in a fixed droplet. The electric field reduces pinning of the three-phase contact line, allowing it to recede at a constant rate. Atomic force microscopy reveals that the resulting aligned structures resemble those produced via the pulling method. The field-assisted alignment results in concentric color bands quantified with image analysis of red, green, and blue line profiles. The alignment technique shown here could reduce self-assembly time from hours to minutes and lend itself to scalable manufacturing techniques such as inkjet printing.