Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 5 de 5
Filter
Add more filters










Database
Language
Publication year range
1.
Opt Express ; 15(10): 6190-9, 2007 May 14.
Article in English | MEDLINE | ID: mdl-19546924

ABSTRACT

We report on the switching of an all-optical flip-flop consisting of a semiconductor optical amplifier (SOA) and a distributed feedback laser diode (DFB), bidirectionally coupled to each other. Both simulation and experimental results are presented. Switching times as low as 50ps, minimal required switch pulse energies below 1pJ and a repetition rate of 1.25GHz have been measured. Contrast ratios over 25dB have been obtained. The dependence on the pulse length and CW input power of the minimal required switch energy is investigated.

2.
Opt Lett ; 31(6): 709-11, 2006 Mar 15.
Article in English | MEDLINE | ID: mdl-16544598

ABSTRACT

We propose the use of an actively mode-locked fiber laser as a multitap optical source for a microwave photonic filter. The fiber laser provides multiple optical taps with an optical frequency separation equal to the external driving radio-frequency signal of the laser that governs its repetition rate. All the optical taps show equal polarization and an overall Gaussian apodization, which reduces the sidelobes. We demonstrate continuous tunability of the filter by changing the external driving radio-frequency signal of the laser, which shows good fine tunability in the operating range of the laser from 5 to 10 GHz.

3.
Opt Lett ; 29(21): 2461-3, 2004 Nov 01.
Article in English | MEDLINE | ID: mdl-15584261

ABSTRACT

We report a novel scheme for a fiber-optic hydrogen sensor based on an erbium-doped fiber laser with a palladium-coated tapered fiber within the laser cavity. The tapered fiber acts as a hydrogen-sensing element. When the sensing element is exposed to a hydrogen atmosphere, its attenuation decreases, changing the cavity losses and leading to a modification of the laser transient. The hydrogen concentration is obtained by simple measurement of the buildup time of the laser. This technique translates the measurement of hydrogen concentration into the time domain, and it can be extended to many intensity-based fiber sensors. Relative variations in the buildup time of up to 55% at an increase of the hydrogen concentration from 0 to 10% are achieved with a resolution of better than 0.1%.


Subject(s)
Equipment Failure Analysis , Fiber Optic Technology/instrumentation , Hydrogen/analysis , Lasers , Photometry/instrumentation , Spectrum Analysis/instrumentation , Transducers , Equipment Design , Optical Fibers , Reproducibility of Results , Sensitivity and Specificity
4.
Opt Lett ; 28(3): 158-60, 2003 Feb 01.
Article in English | MEDLINE | ID: mdl-12656317

ABSTRACT

We report what we believe is the first example of efficient rocking filter formation in polarization-maintaining photonic crystal fiber. Very high coupling efficiencies (as much as -23.5-dB suppression of the input polarization) and loss of < 0.02 dB were achieved for fibers as short as 11 mm. The filters, which we prepared by periodic mechanical twisting and heating with a scanned CO2 laser beam, are highly compact, and they are expected to be temperature stable.

5.
Opt Lett ; 25(18): 1325-7, 2000 Sep 15.
Article in English | MEDLINE | ID: mdl-18066205

ABSTRACT

We report a strongly anisotropic photonic crystal fiber. Twofold rotational symmetry was introduced into a single-mode fiber structure by creation of a regular array of airholes of two sizes disposed about a pure-silica core. Based on spectral measurements of the polarization mode beating, we estimate that the fiber has a beat length of approximately 0.4 mm at a wavelength of 1540 nm, in good agreement with the results of modeling.

SELECTION OF CITATIONS
SEARCH DETAIL
...