Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 6 de 6
Filter
Add more filters










Database
Language
Publication year range
1.
Analyst ; 139(20): 5263-70, 2014 Oct 21.
Article in English | MEDLINE | ID: mdl-25136787

ABSTRACT

A new system requiring greatly reduced operator intervention has been developed for the determination of dissolved inorganic carbon concentration in marine waters. Based on a coulometric method, the system has an accuracy and precision comparable to more complex and expensive methods currently employed. A syringe pump equipped with a 12-port distribution valve is used to precisely dispense an acid solution and sample into a gas stripper. The system can autonomously measure eight discrete samples in duplicate or triplicate with no operator input. The best precision (%RSD) obtained was 0.022% (n = 14) or less than ±1.0 µmol kg(-1). The system is calibrated against a certified reference material (CRM). Average offset from the CRM was 1.2 µmol kg(-1). Sample throughput was 4 samples per h. Carryover effects are negligible but field sample analyses suggest that prefiltering may be necessary in highly turbid waters.

3.
PLoS One ; 8(8): e70766, 2013.
Article in English | MEDLINE | ID: mdl-23951002

ABSTRACT

There is a pressing need to integrate biophysical and human dimensions science to better inform holistic ecosystem management supporting the transition from single species or single-sector management to multi-sector ecosystem-based management. Ecosystem-based management should focus upon ecosystem services, since they reflect societal goals, values, desires, and benefits. The inclusion of ecosystem services into holistic management strategies improves management by better capturing the diversity of positive and negative human-natural interactions and making explicit the benefits to society. To facilitate this inclusion, we propose a conceptual model that merges the broadly applied Driver, Pressure, State, Impact, and Response (DPSIR) conceptual model with ecosystem services yielding a Driver, Pressure, State, Ecosystem service, and Response (EBM-DPSER) conceptual model. The impact module in traditional DPSIR models focuses attention upon negative anthropomorphic impacts on the ecosystem; by replacing impacts with ecosystem services the EBM-DPSER model incorporates not only negative, but also positive changes in the ecosystem. Responses occur as a result of changes in ecosystem services and include inter alia management actions directed at proactively altering human population or individual behavior and infrastructure to meet societal goals. The EBM-DPSER conceptual model was applied to the Florida Keys and Dry Tortugas marine ecosystem as a case study to illustrate how it can inform management decisions. This case study captures our system-level understanding and results in a more holistic representation of ecosystem and human society interactions, thus improving our ability to identify trade-offs. The EBM-DPSER model should be a useful operational tool for implementing EBM, in that it fully integrates our knowledge of all ecosystem components while focusing management attention upon those aspects of the ecosystem most important to human society and does so within a framework already familiar to resource managers.


Subject(s)
Conservation of Natural Resources , Ecosystem , Human Activities , Models, Theoretical , Florida , Geography , Humans , Oceanography
4.
Environ Sci Process Impacts ; 15(3): 579-84, 2013 Mar.
Article in English | MEDLINE | ID: mdl-23738356

ABSTRACT

A portable ammonium analyser was developed and used to measure in situ ammonium in the marine environment. The analyser incorporates an improved LED photodiode-based fluorescence detector (LPFD). This system is more sensitive and considerably smaller than previous systems and incorporates a pre-filtering subsystem enabling measurements in turbid, sediment-laden waters. Over the typical range for ammonium in marine waters (0­10 mM), the response is linear (r(2) = 0.9930) with a limit of detection (S/N ratio > 3) of 10 nM. The working range for marine waters is 0.05­10 mM. Repeatability is 0.3% (n =10) at an ammonium level of 2 mM. Results from automated operation in 15 min cycles over 16 days had good overall precision (RSD = 3%, n = 660). The system was field tested at three shallow South Florida sites. Diurnal cycles and possibly a tidal influence were expressed in the concentration variability observed.


Subject(s)
Environmental Monitoring/instrumentation , Fluorometry/instrumentation , Fresh Water/analysis , Quaternary Ammonium Compounds/analysis , Seawater/analysis , Environmental Monitoring/economics , Equipment Design , Fluorometry/economics , Sensitivity and Specificity
5.
Talanta ; 81(4-5): 1472-6, 2010 Jun 15.
Article in English | MEDLINE | ID: mdl-20441925

ABSTRACT

A simple, effective mixing chamber used in conjunction with a syringe pump for flow analysis is described and evaluated. A mixing chamber was constructed using a conventional 5mL pipette tip and its performance compared with a widely used mixing coil. The results demonstrate that the mixing coil does not rapidly and completely mix solutions. Utilizing a configuration that reversed solution positions in the chamber with each mixing cycle, the proposed mixing chamber achieved complete mixing in a significantly shorter time than the mixing coil. The influence of injected sample volume on absorbance signals was evaluated by calculating an S(1/2) value for the system. As tested with a minimal rinse, the system has no discernable carryover. Testing this new approach in our previously described silicate measurement system resulted in a more than twofold improvement in sensitivity.

6.
Mar Biotechnol (NY) ; 4(1): 30-9, 2002 Jan.
Article in English | MEDLINE | ID: mdl-14961286

ABSTRACT

Larval stages of common marine invertebrates and their ecological roles within their respective communities are frequently ignored because they are hard to identify. Morphological characters are often insufficient to differentiate between genera, much less species. To overcome the obstacles associated with species identification of copepod larvae, we developed a microtiter plate-based hybridization assay. Species-specific probes based on rDNA sequences were bound to microplates and used to capture target DNA. A novel method of linking the probes to the plate with poly-T tail ensured the probes were positioned above the plate surface and available for hybridization; this significantly increased the sensitivity of the assay. Target DNA extracted from individual copepods was amplified with biotin-labeled primers. The labeled target DNA bound to the probe specific for that species and produced a colorimetric change in the assay. The assay can be rapidly performed on freshly caught or ethanol preserved samples and the results visually interpreted.

SELECTION OF CITATIONS
SEARCH DETAIL
...