Electrochemical Response of 3D-Printed Free-Standing Reduced Graphene Oxide Electrode for Sodium Ion Batteries Using a Three-Electrode Glass Cell.

Graphene and its derivatives have been widely used to develop novel materials with applications in energy storage. Among them, reduced graphene oxide has shown great potential for more efficient storage of Na ions and is a current target in the design of electrodes for environmentally friendly Na ion batteries. The search for more sustainable and versatile manufacturing processes also motivates research into additive manufacturing electrodes. Here, the electrochemical responses of porous 3D-printed free-standing log-type structures fabricated using direct ink writing (DIW) with a graphene oxide (GO) gel ink are investigated after thermal reduction in a three-electrode cell configuration. The structures delivered capacities in the range of 50-80 mAh g-1 and showed high stability for more than 100 cycles. The reaction with the electrolyte/solvent system, which caused an initial capacity drop, was evidenced by the nucleation of various Na carbonates and Na2O. The incorporation of Na into the filaments of the structure was verified with transmission electron microscopy and Raman spectroscopy. This work is a proof of concept that structured reduced GO electrodes for Na ion batteries can be achieved from a simple, aqueous GO ink through DIW and that there is scope for improving their performance and capacity.

Graphene-Based Materials, Their Composites, and Potential Applications.

Since its isolation in 2004, monolayer graphene has attracted enormous attention within the scientific community, the industry, and the general public owing to its exceptional properties (electrical, optical, thermal, and mechanical) and prospects [...].

Reinforced 3D Composite Structures of γ-, α-Al2O3 with Carbon Nanotubes and Reduced GO Ribbons Printed from Boehmite Gels.

The ability of boehmite to form printable inks has sparked interest in the manufacturing of 3D alumina (Al2O3) and composite structures by enabling direct ink writing methods while avoiding the use of printing additives. These materials may exhibit high porosity due to the printing and sintering procedures, depending on the intended application. The 3D-printed porous composite structures of γ-Al2O3 and α-Al2O3 containing 2 wt.% of carbon nanotubes or reduced graphene oxide ribbons were fabricated from boehmite gels, followed by different heat treatments. The reinforcing effect of these carbon nanostructures was evidenced by compression tests carried out on the different alumina structures. A maximum relative increase of 50% in compressive strength was achieved for the γ-Al2O3 composite structure reinforced with reduced graphene oxide ribbons, which was also accompanied by an increase in the specific surface area.

Applications of Ceramic/Graphene Composites and Hybrids.

Research activity on ceramic/graphene composites and hybrids has increased dramatically in the last decade. In this review, we provide an overview of recent contributions involving ceramics, graphene, and graphene-related materials (GRM, i.e., graphene oxide, reduced graphene oxide, and graphene nanoplatelets) with a primary focus on applications. We have adopted a broad scope of the term ceramics, therefore including some applications of GRM with certain metal oxides and cement-based matrices in the review. Applications of ceramic/graphene hybrids and composites cover many different areas, in particular, energy production and storage (batteries, supercapacitors, solar and fuel cells), energy harvesting, sensors and biosensors, electromagnetic interference shielding, biomaterials, thermal management (heat dissipation and heat conduction functions), engineering components, catalysts, etc. A section on ceramic/GRM composites processed by additive manufacturing methods is included due to their industrial potential and waste reduction capability. All these applications of ceramic/graphene composites and hybrids are listed and mentioned in the present review, ending with the authors' outlook of those that seem most promising, based on the research efforts carried out in this field.

Protein adsorption and in vitro behavior of additively manufactured 3D-silicon nitride scaffolds intended for bone tissue engineering.

Highly porous scaffolds of Si3N4 are fabricated by direct ink writing method (Robocasting) with a pattern of macroporous cavities of 650-700µm. Two different Si3N4 ink compositions regarding the oxide sintering aids (namely, Y2O3, Al2O3, and SiO2) are tried. Both inks reach solid volume fractions of ~0.40 with about 10-12wt% of polymeric additive content that imparts the necessary pseudoplastic characteristics. The printed structures are sintered under controlled N2 atmosphere either in a conventional graphite furnace or by the spark plasma sintering technique. Skeleton of the scaffolds reaches densities above 95% of the theoretical value with ≈18-24% of linear shrinkage. Analysis of the crystalline phases, microstructure and mechanical properties are comparatively done for both compositions. The bioactivity of these structures is addressed by evaluating the ion release rate in simulated body fluid. In parallel, atomic force microscopy is used to determine the effect of the filaments surface roughness on protein adsorption (Bovine Serum Albumin) for assessing the potential application of 3D-Si3N4 scaffolds in bone regeneration.

Remarkable Effects of an Electrodeposited Copper Skin on the Strength and the Electrical and Thermal Conductivities of Reduced Graphene Oxide-Printed Scaffolds.

Architected Cu/reduced graphene oxide (rGO) heterostructures are achieved by electrodepositing copper on filament-printed rGO scaffolds. The Cu coating perfectly contours the printed rGO structure, but isolated Cu particles also permeate inside the filaments. Although the Cu deposition conveys a certain mass augment, the three-dimensional (3D) structures remain reasonably light (bulk density ≅ 0.42 g·cm-3). The electrical conductivity (σe) of the Cu/rGO structure (∼8 × 104 S·m-1) shows a notable increment compared to σe of the rGO structure (∼2 × 102 S·m-1). The effect on the scaffold robustness is also notable with an increase of the compressive strength by nearly 10 times (from 20 kPa of the rGO scaffold to 150 kPa of the Cu/rGO structure) and cyclability as well. The improved thermal conductivity of the Cu-coated scaffolds (∼4 times higher), in addition to the σe and strength improvements, suggests that 3D Cu/rGO structures could be suitable assemblies for integration into thermal dissipation systems, particularly as thermal interface materials, for compact electronic devices.