The thermoluminescence efficiency of Li2B4O7:Cu and of CaSO4:Tm for photons.

The intrinsic thermoluminescence (TL) efficiency of a TL detector relates the absorbed dose in the detector material to the light yield observed upon evaluation. Knowledge of the TL efficiency is of interest when performing numerical simulations of detector response, where only absorbed dose can be predicted. Here, the experimental determination of TL efficiency for calcium sulphate (CaSO(4):Tm) and lithium borate (Li(2)B(4)O(7):Cu) is reported. These materials are widely used in Panasonic dosemeter badges. The results of the study are in agreement with predictions from track structure theory and microdosimetry, relating an enhanced light yield at low X-ray energies to supralinear behaviour of the TL phosphor.

Field calibration studies for ionisation chambers in mixed high-energy radiation fields.

The monitoring of ambient doses at work places around high-energy accelerators is a challenging task due the complexity of the mixed stray radiation fields encountered. At CERN, mainly Centronics IG5 high-pressure ionisation chambers are used to monitor radiation exposure in mixed fields. The monitors are calibrated in the operational quantity ambient dose equivalent H*(10) using standard, source-generated photon- and neutron fields. However, the relationship between ionisation chamber reading and ambient dose equivalent in a mixed high-energy radiation field can only be assessed if the spectral response to every component and the field composition is known. Therefore, comprehensive studies were performed at the CERN-EU high-energy reference field facility where the spectral fluence for each particle type has been assessed with Monte Carlo simulations. Moreover, studies have been performed in an accessible controlled radiation area in the vicinity of a beam loss point of CERN's proton synchrotron. The comparison of measurements and calculations has shown reasonable agreement for most exposure conditions. The results indicate that conventionally calibrated ionisation chambers can give satisfactory response in terms of ambient dose equivalent in stray radiation fields at high-energy accelerators in many cases. These studies are one step towards establishing a method of 'field calibration' of radiation protection instruments in which Monte Carlo simulations will be used to establish a correct correlation between the response of specific detectors to a given high-energy radiation field.

Dose equivalent measurements in a strongly pulsed high-energy radiation field.

The stray radiation field outside the shielding of high-energy accelerators comprises neutrons, photons and charged particles with a wide range of energies. Often, accelerators operate by accelerating and ejecting short pulses of particles, creating an analogue, pulsed radiation field. The pulses can be as short as 10 micros with high instantaneous fluence rates and dose rates. Measurements of average dose equivalent (rate) for radiation protection purposes in these fields present a challenge for instrumentation. The performance of three instruments (i.e. a recombination chamber, the Sievert Instrument and a HANDI-TEPC) measuring total dose equivalent is compared in a high-energy reference radiation field (CERF) and a strongly pulsed, high-energy radiation field at the CERN proton synchrotron (PS).