ABSTRACT
A combinatorial approach is applied to rapidly deposit and screen Ag-Al thin films to evaluate the mechanical, tribological, and electrical properties as a function of chemical composition. Ag-Al thin films with large continuous composition gradients (6-60 atom % Al) were deposited by a custom-designed combinatorial magnetron sputtering system. X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), scanning and transmission electron microscopy (SEM and TEM), X-ray photoelectron spectroscopy (XPS), nanoindentation, and four-point electrical resistance screening were employed to characterize the chemical composition, structure, and physical properties of the films in a time-efficient way. For low Al contents (<13 atom %), a highly (111)-textured fcc phase was formed. At higher Al contents, a (002)-textured hcp solid solution phase was formed followed by a fcc phase in the most Al-rich regions. No indication of a µ phase was observed. The Ag-Al films with fcc-Ag matrix is prone to adhesive material transfer leading to a high friction coefficient (>1) and adhesive wear, similar to the behavior of pure Ag. In contrast, the hexagonal solid solution phase (from ca. 15 atom %Al) exhibited dramatically reduced friction coefficients (about 15% of that of the fcc phase) and dramatically reduced adhesive wear when tested against the pure Ag counter surface. The increase in contact resistance of the Ag-Al films is limited to only 50% higher than a pure Ag reference sample at the low friction and low wear region (19-27 atom %). This suggests that a hcp Ag-Al alloy can have a potential use in sliding electrical contact applications and in the future will replace pure Ag in specific electromechanical applications.
ABSTRACT
Lead halogen perovskites, and particularly methylammonium lead iodine, CH3NH3PbI3, have recently attracted considerable interest as alternative solar cell materials, and record solar cell efficiencies have now surpassed 20%. Concerns have, however, been raised about the thermal stability of methylammonium lead iodine, and a phase transformation from a tetragonal to a cubic phase has been reported at elevated temperature. Here, this phase transition has been investigated in detail using temperature-dependent X-ray diffraction measurements. The phase transformation is pinpointed to 54 °C, which is well within the normal operating range of a typical solar cell. The cell parameters were extracted as a function of the temperature, from which the thermal expansion coefficient was calculated. The latter was found to be rather high (αv = 1.57 × 10(-4) K(-1)) for both the tetragonal and cubic phases. This is 6 times higher than the thermal expansion coefficient for soda lime glass and CIGS and 11 times larger than that of CdTe. This could potentially be of importance for the mechanical stability of perovskite solar cells in the temperature cycling experienced under normal day-night operation. The experimental knowledge of the thermal expansion coefficients and precise determination of the cell parameters can potentially also be valuable while conducting density functional theory simulations on these systems in order to deliver more accurate band structure calculations.
