Selective identification and separation of ReO4- by biomimetic flexible temperature-sensitive imprinted composite membranes.

A new type of temperature-sensitive imprinted composite membranes(ICMs) was developed. Poly N,N-diethylacrylamide (DEA) blocks, as temperature-sensitive polymer, were grafted onto the substrate of the imprinted polymer separation layer to endow membranes with better adsorption effect. The comprehensive properties of the imprinted composite membranes were adequately tested and evaluated in detail. Results showed that ReO4- -ICMs (Re-ICMs) with temperature-sensitive recognition sites could adjust the structure of the imprinted holes at different temperatures, which presented excellent performance in the selective separation and purification of ReO4-. The prepared Re-ICMs exhibit the maximum adsorption capacity of 0.1639 mmol/g at 35 °C with the equilibrium adsorption time of 2 h. After ten adsorption/desorption cycles, Re-ICMs could still maintain 73.5% of the original adsorption capacity, the separation degree of ReO4-/MnO4- was only reduced from the initial 24.5 to 15.9, and the desorption ratio dropped from 80.4% to 68.4%, indicating that Re-ICMs have excellent adsorption and separation performance and reusability.

Smart ion imprinted polymer for selective adsorption of Ru(â ¢) and simultaneously waste sample being transformed as a catalyst.

In this work, a temperature-sensitive block polymer PDEA-b-P(DEA-co-AM) was synthesized and then introduced into the preparation of a smart Ru(Ⅲ) imprinted polymer (Ru-IIP) to selectively adsorption Ru(Ⅲ) first. Then the waste Ru-IIP was converted into a catalyst in-situ for recycle. The structure and morphology of the prepared polymer were characterized by Fourier transform infrared spectrometer, Scanning electron microscope, BET surface area and Thermogravimetric analysis. The adsorption properties of the synthesized smart material were investigated in terms of adsorption pH, adsorption kinetics and adsorption isotherm. Results documented that the optimal adsorption temperature and pH were 35 °C and 1.5 respectively, the maximum adsorption capacity was 0.153 mmol/g, and the adsorption processes of Ru-IIP were more suitable to be expressed by pseudo-first-order kinetic and Langmuir model. The selectivity studied in different binary mixed solutions showed that Ru-IIP has good selectivity, and reusability results showed that Ru-IIP still maintains a good adsorption effect after 8 cycles. In addition, the waste Ru-IIP, a Ru(Ⅲ) remained waste sample was employed as the catalyst for the synthesis of imines, and result showed the mass of adsorbent would reduce after the completion of catalysis, which could not only catalyze the reaction but also reduce pollution.

Correction to Study on Synthesis and Adsorption Properties of ReO4 - Ion-Imprinted Polymer.

[This corrects the article DOI: 10.1021/acsomega.0c02634.].

Study on Synthesis and Adsorption Properties of ReO4 - Ion-Imprinted Polymer.

In this work, an ion imprinted polymer (ReO4 --IIP) of the perrhenate ion based on acrylamide (AM) and acrylic acid (AA) was prepared by solution polymerization using ReO4 - as a template ion, N,N-methylenebisacrylamide (NMBA) as cross-linkers, hydrogen peroxide-vitamin C (H2O2-Vc) as an initiator, and a mixed solution of water (H2O) and methanol (CH3OH) with volume ratio v(H2O)/v(CH3OH) = 3:7 as a solvent. During the process of synthesis condition investigation and optimization, the adsorption capacity (Q) and the separation degree (R) in the equimolar concentration mixture solutions of NH4ReO4 and KMnO4 were adopted as indexes, and the obtained optimal conditions were as follows: the molar ratios of NMBA, NH4ReO4, AA, H2O2, and Vc to AM were 5.73, 0.052, 1.29, 0.02, and 0.003, and the temperature and time of polymerization were 40 °C and 28 h, respectively. Under optimal conditions, the sample with indexes, Q and R of 0.064 mmol/g and 3.20, were harvested. What is more, a further reusability study found that good adsorption selectivity was maintained after repeating the experiment 9 times. Taking the non-IP prepared under the same conditions as a control, Fourier transform infrared spectroscopy, transmission electron microscopy, and Brunauer Emmett Teller were used to characterize the structure of the ReO4 --IIP prepared under the optimal conditions. Finally, the kinetic study results showed that the zero-order kinetic model could better describe the adsorption process. The thermodynamic study results showed that the Langmuir model was more suitable for describing the isotherm adsorption process of the IIP.

Extraction Behavior of Acidic Phosphorus-Containing Compounds to Some Metal Ions: A Combination Research of Experimental and Theoretical Investigations.

To provide feasible methods for the extraction of valuable metals from spent batteries or low-grade primary ores, the extraction behavior of some representative acidic phosphorus-containing compounds (APCCs) as extractants is evaluated from the perspective of experimental and theoretical investigations in this work. Aqueous solutions containing five metal ions, Ca(II), Co(II), Mg(II), Mn(II), and Ni(II), were made to simulate leaching liquids, and the extraction of these metals was investigated. A simplified calculated model was used to evaluate the interaction between each extractant and metal ions. The calculation results agree well with the experimental tests in trend. This work not only provides potential extractants for the extraction of valuable metals from spent batteries or low-grade primary ores but also demonstrates the practicability of the simplified calculation model.