ABSTRACT
Introduction of a DNA interlayer adjacent to an Al cathode in a polymer light-emitting diode leads to lower turn-on voltages, higher luminance efficiencies, and characteristics comparable to those observed using a Ba electrode. The DNA serves to improve electron injection and also functions as a hole-blocking layer. The temporal characteristics of the devices are consistent with an interfacial dipole layer adjacent to the electrode being responsible for the reduction of the electron injection barrier.
Subject(s)
DNA/chemistry , Electronics/instrumentation , Electrons , Polymers/chemistry , Electrodes , Equipment Design , LightABSTRACT
A microchip structure etched on a glass substrate for packed column solid-phase extraction (SPE) and capillary electrochromatography (CEC) is described. A 200 microm long, octadecylsilane (ODS) packed column was secured using two different approaches: solvent lock or polymer entrapment. The former method was utilized for SPE while the latter approach was applied for CEC. In SPE, the ODS packed chamber gave a detection limit of 70 fM for a nonpolar BODIPY (493/503) dye when concentrated for 3 min at an electroosmotic flow rate of 4.14 nL/min, compared to 30 pM for this detector without the SPE step. SPE beds showed reproducible, linear calibration curves (R(2) = 0.9989) between 1 and 100 pM BODIPY at fixed preconcentration times. Breakthrough curves for the 330 pL (ODS-packed) bed indicated a capacity for BODIPY dye of 8.1 x 10(-14) mmol, or 0.25 mmol dye per liter of bed. The ODS-chamber could also be used to analyze dilute amino acid and peptide solutions. In the CEC format, two neutral dyes (BODIPY and acridine orange) were baseline-separated in an isocratic run with a theoretical plate count of 84 (420 000 plates/m) and a reduced plate height of about 1. A labeled peptide was also analyzed by CEC, using the acidic eluent (84% acetonitrile, and 26% aqueous trifluoroacetic acid (0.05%)) preferred for peptide separations on ODS-coated silica particles.