Mechanisms of cadmium mitigation in tomato plants under orthophosphate and polyphosphate fertilization regimes.

Cadmium (Cd) is one of the most toxic elements in soil, affecting morphological, physiological, and biochemical processes in plants. Mineral plant nutrition was tested as an effective approach to mitigate Cd stress in several crop species. In this regard, the present study aimed to elucidate how different phosphorus (P) fertilization regimes can improve some bio-physiological processes in tomato plants exposed to Cd stress. In a hydroponic experiment, the impact of two phosphorus fertilizer forms (Polyphosphate (poly-P): condensed P-form with 100% polymerization rate and orthophosphate (ortho-P): from orthophosphoric acid) on the photosynthetic activity, plant growth, and nutrient uptake was assessed under three levels of Cd stress (0, 12, and 25 µM of CdCl2). The obtained results confirmed the negative effects of Cd stress on the chlorophyll content and the efficiency of the photosynthesis machinery. The application of poly-P fertilizer significantly improved the chlorophyll stability index (82%) under medium Cd stress (Cd12), as compared to the ortho-P form (55%). The analysis of the chlorophyll α fluorescence transient curve revealed that the amplitude of Cd effect on the different steps of electron transfer between PSII and PSI was significantly reduced under the poly-P fertilization regime compared to ortho-P, especially under Cd12. The evaluation of the RE0/RC parameter showed that the electron flux reducing end electron acceptors at the PSI acceptor side per reaction center was significantly improved in the poly-P treatment by 42% under Cd12 compared to the ortho-P treatment. Moreover, the use of poly-P fertilizer enhanced iron uptake and its stoichiometric homeostasis in the shoot tissue which maintained an adequate absorption of iron under Cd stress conditions. Findings from this study revealed for the first time that inorganic polyphosphate fertilizers can reduce Cd toxicity in tomato plants by enhancing photosynthesis activity, nutrient uptake, plant growth, and biomass accumulation despite the high level of cadmium accumulation in shoot tissues.

A review on phosphorus drip fertigation in the Mediterranean region: Fundamentals, current situation, challenges, and perspectives.

The Mediterranean agricultural sector faces many challenges related to water and mineral resource use for crop production and food security for an exponentially growing population. Phosphorus drip fertigation has recently emerged as an efficient and sustainable technique to improve water and nutrient use efficiency under such challenging pedoclimatic conditions. The classical methods for administering standard P fertilizers to crops (broadcasting and banding) have shown their limitations in terms of P acquisition and use efficiency. More than 60 % of applied P through dry P fertilizers is rapidly transformed into recalcitrant P forms and subsequently lost by soil erosion increasing the effects of P eutrophication issues on the ecosystem's sustainability. The emergence of new advanced irrigation technologies like high-frequent drip irrigation must be accompanied by the development of new P formulations with high water solubility and greater P use efficiency. This review illustrates the state of the art for P fertilizers used in Mediterranean agriculture in the last decades. An overall description is provided for the P fertilizer formulas, their physicochemical properties, as well as their suitability for drip fertigation systems and the consequent effects of their application on photosynthesis, plant growth, and crop productivity. The key factors influencing P fertilizer transformations and use efficiency under drip fertigation systems are extensively discussed in this review with a focus on the differences between orthophosphate and polyphosphate formulations.

Recent progress on emerging technologies for trace elements-contaminated soil remediation.

Abiotic stresses from potentially toxic elements (PTEs) have devastating impacts on health and survival of all living organisms, including humans, animals, plants, and microorganisms. Moreover, because of the rapid growing industrial activities together with the natural processes, soil contamination with PTEs has pronounced, which required an emergent intervention. In fact, several chemical and physical techniques have been employed to overcome the negative impacts of PTEs. However, these techniques have numerous drawback and their acceptance are usually poor as they are high cost, usually ineffectiveness and take longer time. In this context, bioremediation has emerged as a promising approach for reclaiming PTEs-contaminated soils through biological process using bacteria, fungus and plants solely or in combination. Here, we comprehensively reviews and critically discusses the processes by which microorganisms and hyperaccumulator plants extract, volatilize, stabilize or detoxify PTEs in soils. We also established a multi-technology repair strategy through the combination of different strategies, such as the application of biochar, compost, animal minure and stabilized digestate for stimulation of PTE remediation by hyperaccumulators plants species. The possible use of remote sensing of soil in conjunction with geographic information system (GIS) integration for improving soil bio-remediation of PTEs was discussed. By synergistically combining these innovative strategies, the present review will open very novel way for cleaning up PTEs-contaminated soils.

Optimizing phosphorus fertigation management zones using electromagnetic induction, soil properties, and crop yield data under semi-arid conditions.

The impact of climate change on water resource availability and soil quality is more and more emphasized under the Mediterranean basin, mostly characterized by drought and extreme weather conditions. The present study aims to investigate how electromagnetic induction technique and soil mapping combined with crop yield data can be used to optimize phosphorus (P) use efficiency by chickpea crop under drip fertigation system. The study was carried out on a 2.5-ha agricultural plot and the agronomic experiments in two growing cycles of chickpea crop. Soil spatial variability was first assessed by the measurement of soil apparent electrical conductivity (ECa) using the CMD Mini-Explorer sensor, and then, soil physicochemical properties were evaluated based on an oriented soil sampling scheme to explore other soil spatial variabilities influencing chickpea yield and quality. Data from the first agronomic experiment were used in geostatistical, multiple linear regression (MLR), and fuzzy c-means unsupervised classification algorithms to properly identify P drip fertigation management zones (MZs). Results from the Person's correlation analysis revealed that chickpea grain yield was more influenced by soil ECa (r = - 0.56), pH (r = - 0.84), ECe (r = - 0.6), P content (r = 0.72), and calcium (Ca) content (r = - 0.83). The proposed MLR-based model to predict chickpea grain yield showed good performances with a normalized root mean square error (NRMSE) of 0.11% and a coefficient of determination (R2) equal to 0.69. The identified MZs were verified by the one-way variance analysis for the studied soil and plant attributes, revealing that the first MZ1 presents a high grain yield, high soil P content, and low ECa. The low fertility MZ2 located in the south part of the studied site presented a low chickpea grain yield due to the low P content and the high ECa. Moreover, the application of P-variable rate fertigation regimes in the second field experiment significantly improved P use efficiency, chickpea grain yield, seed quality, and farmer income by 18%, 12%, 9%, and 136 $/ha, respectively, as compared to the conventional drip fertigation practices. The approach proposed in this study can greatly contribute to optimizing agro-input use efficiency under drip fertigation system, thereby improving farmers' incomes, preserving the ecosystem, and ensuring sustainable cropping systems in the Mediterranean climate.

Polyphosphate fertilizer impacts the enzymatic and non-enzymatic antioxidant capacity of wheat plants grown under salinity.

By 2050, the predicted global population is set to reach 9.6 billion highlighting the urgent need to increase crop productivity to meet the growing demand for food. This is becoming increasingly challenging when soils are saline and/or deficient in phosphorus (P). The synergic effect of P deficiency and salinity causes a series of secondary stresses including oxidative stress. Reactive Oxygen Species (ROS) production and oxidative damage in plants caused either by P limitation or by salt stress may restrict the overall plant performances leading to a decline in crop yield. However, the P application in adequate forms and doses could positively impact the growth of plants and enhances their tolerance to salinity. In our investigation, we evaluated the effect of different P fertilizers forms (Ortho-A, Ortho-B and Poly-B) and increasing P rates (0, 30 and 45 ppm) on the plant's antioxidant system and P uptake of durum wheat (Karim cultivar) grown under salinity (EC = 3.003 dS/m). Our results demonstrated that salinity caused a series of variations in the antioxidant capacity of wheat plants, at both, enzymatic and non-enzymatic levels. Remarkably, a strong correlation was observed between P uptake, biomass, various antioxidant system parameters and P rates and sources. Soluble P fertilizers considerably enhanced the total plant performances under salt stress compared with control plants grown under salinity and P deficiency (C+). Indeed, salt-stressed and fertilized plants exhibited a robust antioxidant system revealed by the increase in enzymatic activities of Catalase (CAT) and Ascorbate peroxidase (APX) and a significant accumulation of Proline, total polyphenols content (TPC) and soluble sugars (SS) as well as increased biomass, Chlorophyll content (CCI), leaf protein content and P uptake compared to unfertilized plants. Compared to OrthoP fertilizers at 45 ppm P, Poly-B fertilizer showed significant positive responses at 30 ppm P where the increase reached + 18.2% in protein content, + 156.8% in shoot biomass, + 93% in CCI, + 84% in shoot P content, + 51% in CAT activity, + 79% in APX activity, + 93% in TPC and + 40% in SS compared to C+. This implies that PolyP fertilizers might be an alternative for the suitable management of phosphorus fertilization under salinity.

Optimization of macronutrients for improved grain yield of quinoa (Chenopodium quinoa Wild.) crop under semi-arid conditions of Morocco.

In the context of climate change, quinoa represents a potential alternative crop for increasing crops diversity, agricultural productivity, and farmer's income in semi-arid regions. However, appropriate crop management practices under limited water supply are still poorly documented. Quinoa, like other cultivated crops, needs optimum quantities of nutrients, especially nitrogen (N), phosphorus (P), and potassium (K), for better growth and high grain yield. To determine the adequate levels of nutrient requirements and their effect on quinoa growth and productivity, a field experiment was conducted during two growing seasons (2020-2021 and 2021-2022). The experiment was conducted in Ben Guerir region, north-central Morocco, and consisted of a randomized complete block design (RCBD) with three replications. The treatments studied consist of a combination of four N rates (0, 40, 80, and 120 kg ha-1), three P rates (0, 30, and 60 kg P2O5 ha-1), and three K rates (0, 60, and 120 kg K2O ha-1). The physiological, nutritional, and production parameters of quinoa were collected and analyzed. The results showed that the highest total biomass (3.9 t ha-1) and grain yield (0.8 t ha-1) under semi-arid conditions were obtained with 40 kg N ha-1, 60 kg P2O5 ha-1, and 120 kg K2O ha-1. The application of 40-60-120 kg ha-1 of N-P2O5-K2O increased plant height by 44%, chlorophyll content index by 96%, total biomass by 134%, grain yield by 112%, and seed weight by 118%. Among the three macronutrients, N was the most limiting factor, followed by K and P. Nutrients uptake data showed that quinoa needs 60 kg N, 26 kg P2O5, and 205 kg K2O to produce 1 t of grain yield. Our field results provide future recommendations for improving the agronomic and environmental sustainability of quinoa cultivation in dryland areas in Morocco.

Interactive effect of Fe and Mn deficiencies on physiological, biochemical, nutritional and growth status of soybean.

Iron (Fe) deficiency is one of the most common problems of soybean. It causes upper leaves yellowing, interveinal chlorosis, stunted growth and yield loss. Manganese (Mn) deficiency affects the reactions in the oxygen evolving complex (OEC) of photosystem II and increase the accumulation of reactive oxygen species (ROS). The aim of this research is to study the effect of Fe and Mn deficiencies applied separately and simultaneously on physiological, biochemical, nutritional and growth (morphological) parameters of soybean cultivars (Glycine max L.). The experiment was conducted in nutrient hydroponic solution lacking Fe or Mn or both Fe and Mn. Chlorophyll content index (CCI) and chlorophyll a fluorescence were measured through time to detect nutritional disorders at an early growth stage before the apparition of visual symptoms. The results showed that Fe and Mn deficiencies had a significant negative effect on the photosynthetic efficiency, CCI, stomatal conductance, protein content and shoot/root nutrient uptakes. Iron and manganese stress conditions were found to enhance the accumulation of secondary metabolites and increase the antioxidant activity such as total polyphenol content (TPC), malondialdehyde (MDA) and superoxide dismutase (SOD). These impacts were more accentuated when Fe and Mn stress were applied simultaneously than when any of the deficiencies was applied alone. More than that, Mn stress alone did not significantly affect the biomass accumulation. The obtained results showed that, in hydroponic conditions, iron and manganese rational fertilization can improve the studied parameters.

PCA-based detection of phosphorous deficiency in wheat plants using prompt fluorescence and 820 nm modulated reflection signals.

Phosphorus deficiency induces biochemical and morphological changes which affect crop yield and production. Prompt fluorescence signal characterizes the PSII activity and electron transport from PSII to PSI, while the modulated light reflection at 820 (MR 820) nm investigates the redox state of photosystem I (PSI) and plastocyanin (PC). Therefore, combining information from modulated reflection at 820 nm with chlorophyll a fluorescence can potentially provide a more complete understanding of the photosynthetic process and integrating other plant physiological measurements may help to increase the accuracy of detecting the phosphorus deficiency in wheat leaves. In our study, we combined the chlorophyll a fluorescence and MR 820 signals to study the response of wheat plants to phosphorus deficiency as indirect tools for phosphorus plant status characterization. In addition, we studied the changes in chlorophyll content index, stomatal conductance (gs), root morphology, and biomass of wheat plants. The results showed an alteration in the electron transport chain as a specific response to P deficiency in the I-P phase during the reduction of the acceptor side of PSI. Furthermore, P deficiency increased parameters related to the energy fluxes per reaction centers, namely ETo/RC, REo/RC, ABS/RC, and DIo/RC. P deficiency increased the values of MRmin and MRmax and decreased νred, which implies that the reduction of PSI and PC became slower as the phosphorus decreased. The principal component analysis of the modulated reflection and chlorophyll a fluorescence parameters, with the integration of the growth parameters as supplementary variables, accounted for over 71% of the total variance in our phosphorus data using two components and provided a reliable information on PSII and PSI photochemistry under P deficiency.

Improved rock phosphate dissolution from organic acids is driven by nitrate assimilation of bacteria isolated from nitrate and CaCO3-rich soil.

Until now, the solubilization capacities of insoluble mineral P by soil microorganisms have been screened in vitro with media containing NH4+ as a nitrogen source. This presence of NH4+ will lead to an acidification of the medium responsible for the solubilization of the insoluble P. However, besides proton release, the production of organic acids can play a very important role in the release of free P. This physiological mechanism can largely depend on the source of nitrogen (NH4+vs NO3-) assimilated by the bacteria but the influence of the N source on the production of organic acids has yet to be studied. Our aim was to investigate if the N source assimilated by bacteria and the soil characteristics such as the dominant N source (NH4+vs NO3-) and CaCO3 contents might influence the bacterial capacities to solubilize rock phosphate. To fill this objective, we screened the capacity of bacteria isolated from 3 soils to solubilize rock phosphate in vitro in presence of NH4+or NO3-. Then, we selected the most efficient bacterial strains to identify and quantify the release of organic anions into the medium. Among the two hundred and forty-three bacterial strains isolated from the 3 soils, nine and seven isolates were identified with the highest % rock phosphate-solubilization values with NH4+ or NO3- as the sole N-source. Only one strain was able to release free Pi with NH4+ or NO3- as the sole N-source. The most predominant organic acids released by almost all isolates were gluconic acid, lactic acid, glycolic acid, acetic acid, formic acid and pyruvic acid regardless the N-source. However, with NO3- as source of N, the highest concentrations on those acids were found together with the highest release of free Pi into the medium. Molecular analysis of 16S rRNA indicated that almost all strains belonged to Bacillus and Paenibacillus genera. The PCA analysis between soil properties and bacterial capacities to release organic acids and free Pi also revealed that soil factors such as CaCO3 and soil NO3- content positively influenced the release of organic acids by bacteria grown in vitro. Our results concluded that the bacterial rock phosphate-solubilization was intimately related to organic acids production which in turn seemed to be driven by the assimilation of NO3- by bacteria. Therefore, the N-source might be considered a key factor to take into consideration during the screening and selection of suitable strains involved in the P-solubilization.

Photosynthetic performance and nutrient uptake under salt stress: Differential responses of wheat plants to contrasting phosphorus forms and rates.

Salt stress impacts phosphorus (P) bioavailability, mobility, and its uptake by plants. Since P is involved in many key processes in plants, salinity and P deficiency could significantly cause serious damage to photosynthesis, the most essential physiological process for the growth and development of all green plants. Different approaches have been proposed and adopted to minimize the harmful effects of their combined effect. Optimising phosphorus nutrition seems to bring positive results to improve photosynthetic efficiency and nutrient uptake. The present work posed the question if soluble fertilizers allow wheat plants to counter the adverse effect of salt stress. A pot experiment was performed using a Moroccan cultivar of durum wheat: Karim. This study focused on different growth and physiological responses of wheat plants grown under the combined effect of salinity and P-availability. Two Orthophosphates (Ortho-A & Ortho-B) and one polyphosphate (Poly-B) were applied at different P levels (0, 30 and 45 ppm). Plant growth was analysed on some physiological parameters (stomatal conductance (SC), chlorophyll content index (CCI), chlorophyll a fluorescence, shoot and root biomass, and mineral uptake). Fertilized wheat plants showed a significant increase in photosynthetic performance and nutrient uptake. Compared to salt-stressed and unfertilized plants (C+), CCI increased by 93%, 81% and 71% at 30 ppm of P in plants fertilized by Poly-B, Ortho-B and Ortho-A, respectively. The highest significant SC was obtained at 45 ppm using Ortho-B fertilizer with an increase of 232% followed by 217% and 157% for both Poly-B and Ortho-A, respectively. The Photosynthetic performance index (PItot) was also increased by 128.5%, 90.2% and 38.8% for Ortho-B, Ortho-A and Poly B, respectively. In addition, Poly-B showed a significant enhancement in roots and shoots biomass (49.4% and 156.8%, respectively) compared to C+. Fertilized and salt-stressed plants absorbed more phosphorus. The P content significantly increased mainly at 45 ppm of P. Positive correlations were found between phosphorus uptake, biomass, and photosynthetic yield. The increased photochemical activity could be due to a significant enhancement in light energy absorbed by the enhanced Chl antenna. The positive effect of adequate P fertilization under salt stress was therefore evident in durum wheat plants.

Polyphosphate application influences morpho-physiological root traits involved in P acquisition and durum wheat growth performance.

BACKGROUND: Among phosphate (P) fertilizers, polyphosphates (PolyPs) have shown promising results in terms of crop yield and plant P nutrition. However, compared to conventional P inputs, very little is known on the impact of PolyPs fertilizers on below- and above-ground plant functional traits involved in P acquisition. This study aims to evaluate agro-physiological responses of durum wheat variety ´Karim´ under different PolyPs applications. Three PolyPs fertilizers (PolyA, PolyB, and PolyC) versus one orthophosphate (OrthoP) were applied at three doses; 30 (D30), 60 (D60), and 90 (D90) kg P/ha under controlled conditions. The PolyPs (especially PolyB and PolyC) application at D60 significantly increased morphophysiological root traits (e.g., RL: 42 and 130%; RSA:40 and 60%), shoot inorganic P (Pi) content (159 and 88%), and root P acquisition efficiency (471 and 296%) under PolyB and PolyC, respectively compared to unfertilized plants. Above-ground physiological parameters, mainly nutrient acquisition, chlorophyll content and chlorophyll fluorescence parameters were also improved under PolyB and PolyA application at D60. A significant and positive correlation between shoot Pi content and rhizosphere soil acid phosphatase activity was observed, which reveal the key role of these enzymes in PolyPs (A and B) use efficiency. Furthermore, increased P uptake/RL ratio along with shoot Pi indicates more efficient P allocation to shoots with less investment in root biomass production under PolyPs (especially A and B). CONCLUSIONS: Under our experimental conditions, these findings report positive impacts of PolyPs on wheat growth performance, particularly on photosynthesis and nutrient acquisition at D60, along with modulation of root morpho-physiological traits likely responsible of P acquisition efficiency.

A phospho-compost biological-based approach increases phosphate rock agronomic efficiency in faba bean as compared to chemical and physical treatments.

Under arid and semi-arid conditions, direct application of phosphate rock (PR) as a source of phosphorus (P) for crop production is likely influenced by agricultural practices and soil properties. Different approaches could be used to improve the agronomic efficiency of low-grade PR over a wider range of soils and crops. In this study, biological, physical, and chemical treatments of low-grade Moroccan PR were investigated and compared through agronomic trials on faba bean grown under alkaline soil conditions. The physical treatment was based on blending PR with triple superphosphate (TSP) at 75:25 and 50:50 ratios, the biological treatments involved co-application of PR with compost at 50:50 ratio and phospho-compost elaborated from PR (20%), sewage sludge (46%), and wheat residues (34%), while the chemical treatment was obtained by a 30% acidulation of PR by phosphoric acid. Control treatments consisting of zero P application (control), PR alone, and TSP alone were considered to assess the effectiveness of the abovementioned techniques to improve PR agronomic efficiency. A pot experiment was conducted in sandy soil (Jorf Lasfar, central Morocco) for 60 days in a completely randomized design considering eight treatments. All treatments, except the control, were amended with 52 mg kg-1 of P from different PR-based fertilizers before sowing. At the flowering stage (60-day-old plants), results indicated that all PR treatments significantly improved plant growth, root nodulation, and nutrient uptake compared to the control. The relative agronomic efficiency of pretreated PR was significantly higher with phospho-compost treatment (86%) than the partially acidulated PR (78%) or the PR/TSP blend 50:50 (64%). Likewise, P uptake, P use efficiency, number of root nodules, and N uptake all were improved under PR treatments. Our finding revealed that the biological technique based on phospho-compost yielded better compared to chemical and physical treatments.

Potassium and phosphorus content ratio in hydroponic culture affects tomato plant growth and nutrient uptake.

Mineral nutrient deficiencies induce a cascade of physiological, morphological, and biochemical changes in plants which reduce vegetative growth. In this work, the impact of P and K concentration levels on tomato plant development grown in hydroponic culture was investigated. Root morphology, chlorophyll a fluorescence, phosphorus (P) and potassium (K) content, and shoot and root biomass were analyzed. Root morphology showed significant differences among the plants grown in hydroponic culture with different concentrations of P and K. Plant root/shoot dry biomass ratio decreased by 22 and 35% for P15K0 and P30K0, respectively, compared to the control (P30K232). The deficiency of P and K (individually or both) reduced significantly the root mass density parameter. For example, root mass density decreased by 38% at P15K0 treatment compared to control. Correlation analysis showed that the P and K content ratio in shoot and root was significantly and positively correlated with root volume. Deficiencies in K and P decreased the relative size of the PSI final electron acceptor pool and the electron flow on the acceptor side of PSI. Tomato growth response depend on the availability of P and K, however, interactions between these two nutrients could influence their uptake and utilization.

Interactive effect of soil moisture content and phosphorus fertilizer form on chickpea growth, photosynthesis, and nutrient uptake.

Water shortage and soil nutrient depletion are considered the main factors limiting crops productivity in the Mediterranean region characterized by longer and frequent drought episodes. In this study, we investigated the interactive effects of P fertilizer form and soil moisture conditions on chickpea photosynthetic activity, water and nutrient uptake, and their consequent effects on biomass accumulation and nutrient use efficiency. Two P fertilizer formulas based on orthophosphates (Ortho-P) and polyphosphates (Poly-P) were evaluated under three irrigation regimes (I1: 75% of field capacity, I2: 50% FC and I3: 25% FC), simulating three probable scenarios of soil water content in the Mediterranean climate (adequate water supply, medium, and severe drought stress), and compared to an unfertilized treatment. The experiment was conducted in a spilt-plot design under a drip fertigation system. The results showed significant changes in chickpea phenotypic and physiological traits in response to different P and water supply regimes. Compared with the unfertilized treatment, the stomata density and conductance, chlorophyll content, photosynthesis efficiency, biomass accumulation, and plant nutrient uptake were significantly improved under P drip fertigation. The obtained results suggested that the P fertilizer form and irrigation regime providing chickpea plants with enough P and water, at the early growth stage, increased the stomatal density and conductance, which significantly improved the photosynthetic performance index (PIABS) and P use efficiency (PUE), and consequently biomass accumulation and nutrient uptake. The significant correlations established between leaf stomatal density, PIABS, and PUE supported the above hypothesis. We concluded that the Poly-P fertilizers applied in well-watered conditions (I1) performed the best in terms of chickpea growth improvement, nutrient uptake and use efficiency. However, their effectiveness was greatly reduced under water stress conditions, unlike the Ortho-P form which kept stable positive effects on the studied parameters.

Exploring the correlation between salt tolerance and yield: research advances and perspectives for salt-tolerant forage sorghum selection and genetic improvement.

MAIN CONCLUSION: Some salt stress response mechanisms can translate into sorghum forage yield and thus act as targets for genetic improvement. Sorghum is a drought-tolerant cereal that is widely grown in the vast Africa's arid and semi-arid areas. Apart from drought, salinity is a major abiotic factor that, in addition to natural causes, has been exacerbated by increased poor anthropological activities. The importance of sorghum as a forage crop in saline areas has yet to be fully realized. Despite intraspecific variation in salt tolerance, sorghum is generally moderately salt-tolerant, and its productivity in saline soils can be remarkably limited. This is due to the difficulty of replicating optimal field saline conditions due to the great heterogeneity of salt distribution in the soil. As a promising fodder crop for saline areas, classic phenotype-based selection methods can be integrated with modern -omics in breeding programs to simultaneously address salt tolerance and production. To enable future manipulation, selection, and genetic improvement of sorghum with high yield and salt tolerance, here, we explore the potential positive correlations between the reliable indices of sorghum performance under salt stress at the phenotypic and genotypic level. We then explore the potential role of modern selection and genetic improvement programs in incorporating these linked salt tolerance and yield traits and propose a mechanism for future studies.

Chickpea plant responses to polyphosphate fertiliser forms and drip fertigation frequencies: effect on photosynthetic performance and phenotypic traits.

Photosynthesis is the main biophysiological process that governs plant growth and development. Under nutrient deficiency in crops and soils, many photosynthetic reactions can be disturbed. We compared two polyphosphates (Poly-A and Poly-B) and an orthophosphate fertiliser (Ortho-P) to an unfertilised treatment under three drip fertigation frequencies. Results showed that the electron transport chain between PSII and PSI was significantly enhanced in fertigated chickpea plants compared with the control treatment. The polyphosphate fertiliser (Poly-A) enhanced the number of electron acceptors of the photosynthetic linear electron transport chain compared with the other fertiliser forms. Furthermore, the time for reaching the maximum intensity F m was shortened in the fertilised chickpea plant indicating that the rate of light trapping and electron transport was enhanced under phosphorus drip fertigation. Also, the energy needed to close all reaction centres was decreased with P fertigated treatments, as revealed by the electron acceptor pool size of PSII (Sm/tFmax ). However, no significant effects of fertiliser forms or fertigation frequencies were observed on the energetic demand for reaction centres closure. Plants grown under polyphosphate fertigation absorbed significantly more phosphorus. Positive correlations between phosphorus uptake, photosynthetic yield, chickpea podding dynamic, and grain yield showed the beneficial effects of adequate phosphorus nutrition on chickpea growth and productivity.

Industrial symbiosis of anaerobic digestion and pyrolysis: Performances and agricultural interest of coupling biochar and liquid digestate.

The sustainability of the anaerobic digestion industry is closely related to proper digestate disposal. In this study, an innovative cascading biorefinery concept coupling anaerobic digestion and subsequent pyrolysis of the digestate was investigated with the aim of enhancing the energy recovery and improving the fertilizers from organic wastes. Continuous anaerobic co-digestion of quinoa residues with wastewater sludge (45/55% VS) exhibited good stability and a methane production of 219 NL CH4/kg VS. Subsequent pyrolysis of the solid digestate was carried out (at 500 °C, 1 h, and 10 °C/min), resulting in a products distribution of 40 wt% biochar, 36 wt% bio-oil, and 24 wt% syngas. The organic phase (OP) of bio-oil and syngas exhibited higher and lower heating values of 34 MJ/kg and 11.8 MJ/Nm3, respectively. The potential synergy of coupling biochar with liquid digestate (LD) for agronomic purposes was investigated. Interestingly, coupling LD (at 170 kg N/ha) with biochar (at 25 tons/ha) improved the growth of tomato plants up to 25% compared to LD application alone. In parallel, co-application of biochar with LD significantly increased the ammonia volatilization (by 64%) compared to LD application alone, although their simultaneous use did not impact the C and N mineralization rates.

Interactive effect of potassium and cadmium on growth, root morphology and chlorophyll a fluorescence in tomato plant.

A hydroponic experiment was conducted to evaluate the role of potassium (K) in tomato plant growth exposed to cadmium (Cd) stress. In this work, the effects of three potassium nutrition regimes (155, 232 and 310 ppm of K) combined with Cd at different levels (0, 12 and 25 µM of CdCl2) on chlorophyll content index, root and shoot dry weights, root morphology, chlorophyll a fluorescence and translocation factor were analyzed. The results showed a negative effect of cadmium, at different concentrations, on all these parameters. However, optimization of K nutrition has shown promising results by limiting the negative effect of Cd. A positive effect of the high concentration of K (310 ppm) was observed on leaf chlorophyll content and chlorophyll a fluorescence compared to 232 and 155 ppm under Cd stress. K supply improved the electron transport at PSI side indicated by the increase in the amplitude of the I-P phase of OJIP transient. Also, K at a concentration of 310 ppm significantly reduced Cd translocation from root to shoot and improved root and shoot growth parameters in the presence of Cd. K supplementation can reduce the negative effect of Cd by improving photosynthesis and promoting chlorophyll synthesis. The optimization of nutrients composition and concentration might be a good strategy to reduce the impact of Cd on plant growth and physiology.

Production and Dry Mechanochemical Activation of Biochars Derived from Moroccan Red Macroalgae Residue and Olive Pomace Biomass for Treating Wastewater: Thermodynamic, Isotherm, and Kinetic Studies.

This study aimed to produce activated biochars (BCs) from Moroccan algae residue (AG) and olive pomace (OP) using mechanochemical activation with NaOH and ball milling (BM) for treating artificial textile wastewater containing methylene blue (MeB). The produced OP-activated BC by BM showed the highest absolute value of ζ-potential (-59.7 mV) and high removal efficiency of MeB compared to other activated BCs. The nonlinear pseudo-first-order kinetic model was the most suitable model to describe the kinetics of adsorption of MeB onto biochars produced from AG and the NaOH-activated BC from OP, whereas the nonlinear pseudo-second-order kinetic model suits the OP raw biochar and BM-activated BC. The nonlinear Langmuir isotherm model was the most suitable model for describing MeB adsorption onto BCs, compared to the nonlinear Freundlich isotherm model. The maximum adsorption capacities of AG-activated BCs with NaOH and BM were 13.1 and 9.1 mg/g, respectively, while those of OP-activated BCs were 2.6 and 31.8 mg/g, respectively. The thermodynamic study indicates the spontaneous and endothermic nature of the adsorption process of most activated BCs. In addition, ΔS° values indicate the increase of randomness at the solid-liquid interface during MeB sorption onto BC.

Recent trends in organic coating based on biopolymers and biomass for controlled and slow release fertilizers.

The growth of the human population is causing an exponential increase in the need for food. Fertilizers are one of the most important elements to meet this increased demand and to ensure global food security. Many enhanced efficiency fertilizers, such as controlled-release fertilizers (CRFs) have been developed. Although these fertilizers offer many advantages over prior generations, their high cost of production as well as unfavorable effects on the environment and soil quality have limited their use. To mitigate these issues, CRFs based on biopolymers (CRF@BB) represent a new generation of fertilizers produced by coating the granules with biopolymers. In addition to controlling the nutrient release rate, these products also enhance the soil quality and they reduce the negative effects associated with conventional fertilizers. This review summarizes the recent advances in biopolymers and derived biopolymers used in the area of CRF@BB, the coating technologies, and the parameters governing the release behavior through organic coating materials, as well as the effect of coated CRFs on the soil and plants growth.