Digital Pregnancy Test Powered by an Air-Breathing Paper-Based Microfluidic Fuel Cell Stack Using Human Urine as Fuel.

The direct integration of paper-based microfluidic fuel cells (µFC's) toward creating autonomous lateral flow assays has attracted attention. Here, we show that an air-breathing paper-based µFC could be used as a power supply in pregnancy tests by oxidizing the human urine used for the diagnosis. We present an air-breathing paper-based µFC connected to a pregnancy test, and for the first time, as far as we know, it is powered by human urine without needing any external electrolyte. It uses TiO2-Ni as anode and Pt/C as cathode; the performance shows a maximum value of voltage and current and power densities of ∼0.96 V, 1.00 mA cm-2, and 0.23 mW cm-2, respectively. Furthermore, we present a simple design of a paper-based µFC's stack powered with urine that shows a maximum voltage and maximum current and power densities of ∼1.89 V, 2.77 mA cm-2 and 1.38 mW cm-2, respectively, which powers the display of a pregnancy test allowing to see the analysis results.

Microbial diversity assessment of polychlorinated biphenyl-contaminated soils and the biostimulation and bioaugmentation processes.

The aim of this study was to know the biodiversity of total microorganisms contained in two polychlorinated biphenyl-contaminated aged soils and evaluate the strategies of bioaugmentation and biostimulation to biodegrade the biphenyls. Besides, the aerobic cultivable microorganisms were isolated and their capacity to biodegrade a commercial mixture of six congeners of biphenyls was evaluated. Biodiversity of contaminated soils was dominated by Actinobacteria (42.79%) and Firmicutes (42.32%) phyla, and others in smaller proportions such as Proteobacteria, Gemmatimonadetes, Chloroflexi, and Bacteroidetes. At the genus level, the majority of the population did not exceed 7% of relative abundance, including Bacillus, Achromobacter, Clostridium, and Pontibacter. Furthermore, four autochthonous bacterial cultures were possible isolates from the soils, which were identified by partial sequencing of the 16S rRNA gene, as Bacillus sp., Achromobacter sp., Pseudomonas stutzeri, and Bacillus subtilis, which were used for the bioaugmentation process. The bioaugmentation and biostimulation strategies achieved a biodegradation of about 60% of both soils after 8 weeks of the process; also, the four isolates were used as mixed culture to biodegrade a commercial mix of six polychlorinated biphenyl congeners; after 4 weeks of incubation, the concentration decreased from 0.5 mg/L to 0.23 mg/L.

Facile Synthesis of SrCO3-Sr(OH)2/PPy Nanocomposite with Enhanced Photocatalytic Activity under Visible Light.

Pyrrole monomer was chemically polymerized onto SrCO3-Sr(OH)2 powders to obtain SrCO3-Sr(OH)2/polypyrrole nanocomposite to be used as a candidate for photocatalytic degradation of methylene blue dye (MB). The material was characterized by Fourier transform infrared (FTIR) spectroscopy, UV/Vis spectroscopy, and X-ray diffraction (XRD). It was observed from transmission electronic microscopy (TEM) analysis that the reported synthesis route allows the production of SrCO3-Sr(OH)2 nanoparticles with particle size below 100 nm which were embedded within a semiconducting polypyrrole matrix (PPy). The SrCO3-Sr(OH)2 and SrCO3-Sr(OH)2/PPy nanocomposites were tested in the photodegradation of MB dye under visible light irradiation. Also, the effects of MB dye initial concentration and the catalyst load on photodegradation efficiency were studied and discussed. Under the same conditions, the efficiency of photodegradation of MB employing the SrCO3-Sr(OH)2/PPy nanocomposite increases as compared with that obtained employing the SrCO3-Sr(OH)2 nanocomposite.