Rapid Detection of Urinary Tract Infections via Bacterial Nuclease Activity.

Rapid and accurate bacterial detection methods are needed for clinical diagnostic, water, and food testing applications. The wide diversity of bacterial nucleases provides a rich source of enzymes that could be exploited as signal amplifying biomarkers to enable rapid, selective detection of bacterial species. With the exception of the use of micrococcal nuclease activity to detect Staphylococcus aureus, rapid methods that detect bacterial pathogens via their nuclease activities have not been developed. Here, we identify endonuclease I as a robust biomarker for E. coli and develop a rapid ultrasensitive assay that detects its activity. Comparison of nuclease activities of wild-type and nuclease-knockout E. coli clones revealed that endonuclease I is the predominant DNase in E. coli lysates. Endonuclease I is detectable by immunoblot and activity assays in uropathogenic E. coli strains. A rapid assay that detects endonuclease I activity in patient urine with an oligonucleotide probe exhibited substantially higher sensitivity for urinary tract infections than that reported for rapid urinalysis methods. The 3 hr turnaround time is much shorter than that of culture-based methods, thereby providing a means for expedited administration of appropriate antimicrobial therapy. We suggest this approach could address various unmet needs for rapid detection of E. coli.

Cy3 and Cy5 dyes attached to oligonucleotide terminus stabilize DNA duplexes: predictive thermodynamic model.

Cyanine dyes are important chemical modifications of oligonucleotides exhibiting intensive and stable fluorescence at visible light wavelengths. When Cy3 or Cy5 dye is attached to 5' end of a DNA duplex, the dye stacks on the terminal base pair and stabilizes the duplex. Using optical melting experiments, we have determined thermodynamic parameters that can predict the effects of the dyes on duplex stability quantitatively (ΔG°, Tm). Both Cy dyes enhance duplex formation by 1.2 kcal/mol on average, however, this Gibbs energy contribution is sequence-dependent. If the Cy5 is attached to a pyrimidine nucleotide of pyrimidine-purine base pair, the stabilization is larger compared to the attachment to a purine nucleotide. This is likely due to increased stacking interactions of the dye to the purine of the complementary strand. Dangling (unpaired) nucleotides at duplex terminus are also known to enhance duplex stability. Stabilization originated from the Cy dyes is significantly larger than the stabilization due to the presence of dangling nucleotides. If both the dangling base and Cy3 are present, their thermodynamic contributions are approximately additive. New thermodynamic parameters improve predictions of duplex folding, which will help design oligonucleotide sequences for biophysical, biological, engineering, and nanotechnology applications.

Improved Performance of Anti-miRNA Oligonucleotides Using a Novel Non-Nucleotide Modifier.

Anti-microRNA oligonucleotides (AMOs) are steric blocking antisense reagents that inhibit microRNA (miRNA) function by hybridizing and repressing the activity of a mature miRNA. First generation AMOs employed 2'-O-Methyl RNA nucleotides (2'OMe) with phosphorothioate (PS) internucleotide linkages positioned at both ends to block exonuclease attack. Second generation AMOs improved potency through the use of chemical modifications that increase binding affinity to the target, such as locked nucleic acid (LNA) residues. However, this strategy can reduce specificity as high binding affinity compounds can bind to and suppress function of related sequences even if one or more mismatches are present. Further, unnatural modified nucleic acid residues can have toxic side effects. In the present study, a variety of non-nucleotide modifiers were screened for utility in steric blocking antisense applications. A novel compound, N,N-diethyl-4-(4-nitronaphthalen-1-ylazo)-phenylamine ("ZEN"), was discovered that increased binding affinity and blocked exonuclease degradation when placed at or near each end of a single-stranded oligonucleotide. This new modification was combined with the 2'OMe RNA backbone to make ZEN-AMOs. The new ZEN-AMOs have high potency and can effectively inhibit miRNA function in vitro at low nanomolar concentrations, show high specificity, and have low toxicity in cell culture.Molecular Therapy-Nucleic Acids (2013) 2, e117; doi:10.1038/mtna.2013.46; published online 27 August 2013.

Stability and mismatch discrimination of locked nucleic acid-DNA duplexes.

Locked nucleic acids (LNA; symbols of bases, +A, +C, +G, and +T) are introduced into chemically synthesized oligonucleotides to increase duplex stability and specificity. To understand these effects, we have determined thermodynamic parameters of consecutive LNA nucleotides. We present guidelines for the design of LNA oligonucleotides and introduce free online software that predicts the stability of any LNA duplex oligomer. Thermodynamic analysis shows that the single strand-duplex transition is characterized by a favorable enthalpic change and by an unfavorable loss of entropy. A single LNA modification confines the local conformation of nucleotides, causing a smaller, less unfavorable entropic loss when the single strand is restricted to the rigid duplex structure. Additional LNAs adjacent to the initial modification appear to enhance stacking and H-bonding interactions because they increase the enthalpic contributions to duplex stabilization. New nearest-neighbor parameters correctly forecast the positive and negative effects of LNAs on mismatch discrimination. Specificity is enhanced in a majority of sequences and is dependent on mismatch type and adjacent base pairs; the largest discriminatory boost occurs for the central +C·C mismatch within the +T+C+C sequence and the +A·G mismatch within the +T+A+G sequence. LNAs do not affect specificity in some sequences and even impair it for many +G·T and +C·A mismatches. The level of mismatch discrimination decreases the most for the central +G·T mismatch within the +G+G+C sequence and the +C·A mismatch within the +G+C+G sequence. We hypothesize that these discrimination changes are not unique features of LNAs but originate from the shift of the duplex conformation from B-form to A-form.

Nucleotide bias observed with a short SELEX RNA aptamer library.

Systematic evolution of ligands by exponential enrichment (SELEX) is a powerful in vitro selection process used for over 2 decades to identify oligonucleotide sequences (aptamers) with desired properties (usually high affinity for a protein target) from randomized nucleic acid libraries. In the case of RNA aptamers, several highly complex RNA libraries have been described with RNA sequences ranging from 71 to 81 nucleotides (nt) in length. In this study, we used high-throughput sequencing combined with bioinformatics analysis to thoroughly examine the nucleotide composition of the sequence pools derived from several selections that employed an RNA library (Sel2N20) with an abbreviated variable region. The Sel2N20 yields RNAs 51 nt in length, which unlike longer RNAs, are more amenable to large-scale chemical synthesis for therapeutic development. Our analysis revealed a consistent and early bias against inclusion of adenine, resulting in aptamers with lower predicted minimum free energies (ΔG) (higher structural stability). This bias was also observed in control, "nontargeted" selections in which the partition step (against the target) was omitted, suggesting that the bias occurred in 1 or more of the amplification and propagation steps of the SELEX process.

Measuring thermodynamic details of DNA hybridization using fluorescence.

Modern real-time PCR systems make it easy to monitor fluorescence while temperature is varied for hundreds of samples in parallel, permitting high-throughput studies. We employed such system to investigate melting transitions of ordered nucleic acid structures into disordered random coils. Fluorescent dye and quencher were attached to oligonucleotides in such a way that changes of fluorescence intensity with temperature indicated progression of denaturation. When fluorescence melting data were compared with traditional ultraviolet optical experiments, commonly used dye/quencher combinations, like fluorescein and tetramethylrhodamine, showed substantial discrepancies. We have therefore screened 22 commercially available fluorophores and quenchers for their ability to reliably report annealing and melting transitions. Dependence of fluorescence on temperature and pH was also investigated. The optimal performance was observed using Texas Red or ROX dyes with Iowa Black RQ or Black Hole quenchers. These labels did not alter two-state nature of duplex melting process and provided accurate melting temperatures, free energies, enthalpies, and entropies. We also suggest a new strategy for determination of DNA duplex thermodynamics where concentration of a dye-labeled strand is kept constant and its complementary strand modified with a quencher is added at increasing excess. These methodological improvements will help build predictive models of nucleic acid hybridization.

IDT SciTools: a suite for analysis and design of nucleic acid oligomers.

DNA and RNA oligomers are used in a myriad of diverse biological and biochemical experiments. These oligonucleotides are designed to have unique biophysical, chemical and hybridization properties. We have created an integrated set of bioinformatics tools that predict the properties of native and chemically modified nucleic acids and assist in their design. Researchers can select PCR primers, probes and antisense oligonucleotides, find the most suitable sequences for RNA interference, calculate stable secondary structures, and evaluate the potential for two sequences to interact. The latest, most accurate thermodynamic algorithms and models are implemented. This free software is available at http://www.idtdna.com/SciTools/SciTools.aspx.

Predicting stability of DNA duplexes in solutions containing magnesium and monovalent cations.

Accurate predictions of DNA stability in physiological and enzyme buffers are important for the design of many biological and biochemical assays. We therefore investigated the effects of magnesium, potassium, sodium, Tris ions, and deoxynucleoside triphosphates on melting profiles of duplex DNA oligomers and collected large melting data sets. An empirical correction function was developed that predicts melting temperatures, transition enthalpies, entropies, and free energies in buffers containing magnesium and monovalent cations. The new correction function significantly improves the accuracy of predictions and accounts for ion concentration, G-C base pair content, and length of the oligonucleotides. The competitive effects of potassium and magnesium ions were characterized. If the concentration ratio of [Mg (2+)] (0.5)/[Mon (+)] is less than 0.22 M (-1/2), monovalent ions (K (+), Na (+)) are dominant. Effects of magnesium ions dominate and determine duplex stability at higher ratios. Typical reaction conditions for PCR and DNA sequencing (1.5-5 mM magnesium and 20-100 mM monovalent cations) fall within this range. Conditions were identified where monovalent and divalent cations compete and their stability effects are more complex. When duplexes denature, some of the Mg (2+) ions associated with the DNA are released. The number of released magnesium ions per phosphate charge is sequence dependent and decreases surprisingly with increasing oligonucleotide length.

Predicting ultraviolet spectrum of single stranded and double stranded deoxyribonucleic acids.

Synthetic oligodeoxynucleotides are widely used in many biological, biochemical and biophysical applications. The concentration, composition and structure of DNA are often determined from its ultraviolet spectrum. Although parameters for use with the nearest-neighbor model for prediction of extinction coefficients of single stranded DNAs at 260 nm were published some time ago, similar parameters for other wavelengths or for use with DNA duplexes have not been reported. Practical formulae and parameters for prediction of UV spectra, hypochromism and peak wavelengths were experimentally determined for both single stranded and double stranded oligodeoxynucleotides in the range from 215 to 310 nm. The accuracy of predictions made using the nearest-neighbor model and the base composition model was determined and compared. The spectrum of any DNA oligomer can be calculated using a Microsoft Excel application that is available in the Appendix A.

Design of LNA probes that improve mismatch discrimination.

Locked nucleic acids (LNA) show remarkable affinity and specificity against native DNA targets. Effects of LNA modifications on mismatch discrimination were studied as a function of sequence context and identity of the mismatch using ultraviolet (UV) melting experiments. A triplet of LNA residues centered on the mismatch was generally found to have the largest discriminatory power. An exception was observed for G-T mismatches, where discrimination decreased when the guanine nucleotide at the mismatch site or even the flanking nucleotides were modified. Fluorescence experiments using 2-aminopurine suggest that LNA modifications enhance base stacking of perfectly matched base pairs and decrease stabilizing stacking interactions of mismatched base pairs. LNAs do not change the amount of counterions (Na+) that are released when duplexes denature. New guidelines are suggested for design of LNA probes, which significantly improve mismatch discrimination in comparison with unmodified DNA probes.

Studies of DNA dumbbells VIII. Melting analysis of DNA dumbbells with dinucleotide repeat stem sequences.

Melting curves and circular dichroism spectra were measured for a number of DNA dumbbell and linear molecules containing dinucleotide repeat sequences of different lengths. To study effects of different sequences on the melting and spectroscopic properties, six DNA dumbbells whose stems contain the central sequences (AA)(10), (AC)(10), (AG)(10), (AT)(10), (GC)(10), and (GG)(10) were prepared. These represent the minimal set of 10 possible dinucleotide repeats. To study effects of dinucleotide repeat length, dumbbells with the central sequences (AG)(n), n = 5 and 20, were prepared. Control molecules, dumbbells with a random central sequence, (RN)(n), n = 5, 10, and 20, were also prepared. The central sequence of each dumbbell was flanked on both sides by the same 12 base pairs and T(4) end-loops. Melting curves were measured by optical absorbance and differential scanning calorimetry in solvents containing 25, 55, 85, and 115 mM Na(+). CD spectra were collected from 20 to 45 degrees C and [Na(+)] from 25 to 115 mM. The spectral database did not reveal any apparent temperature dependence in the pretransition region. Analysis of the melting thermodynamics evaluated as a function of Na(+) provided a means for quantitatively estimating the counterion release with melting for the different sequences. Results show a very definite sequence dependence, indicating the salt-dependent properties of duplex DNA are also sequence dependent. Linear DNA molecules containing the (AG)(n) and (RN)(n), sequences, n = 5, 10, 20, and 30, were also prepared and studied. The linear DNA molecules had the exact sequences of the dumbbell stems. That is, the central repeat sequence in each linear duplex was flanked on both sides by the same 12-bp sequence. Melting and CD studies were also performed on the linear DNA molecules. Comparison of results obtained for the same sequences in dumbbell and linear molecular environments reveals several interesting features of the interplay between sequence-dependent structural variability, sequence length, and the unconstrained (linear) or constrained (dumbbell) molecular environments.

Melting temperatures of nucleic acids: discrepancies in analysis.

Melting temperature, T(m), is an important property of nucleic acid duplexes. It is typically determined from spectroscopic or calorimetric melting experiments. More than one analytical method has been used to extract T(m) values from experimental melting data. Unfortunately, different methods do not give the same results; the same melting data can be assigned different T(m) values depending upon which method is used to process that data. Inconsistencies or systematic errors between T(m)s reported in published data sets can be significant and add confusion to the field. Errors introduced from analysis can be greater than experimental errors, ranging from a fraction of degree to several degrees. Of the various methods, the most consistent and meaningful approach defines melting temperature as the temperature at the transition midpoint where half of the base pairs are melted and standard free energy is zero. Assuming a two-state melting behavior, we present here a set of general equations that can be used to reconcile these analytical T(m) differences and convert results to the correct melting temperatures at the transition midpoint. Melting temperatures collected from published sources, which were analyzed using different methods, can now be corrected for these discrepancies and compared on equal footing. The similar corrections apply to T(m) differences between calorimetric and spectroscopic melting curves. New algorithm for selection of linear sloping baselines, 2nd derivative method, is suggested, which can be used to automate melting curve analysis.

Effects of fluorescent dyes, quenchers, and dangling ends on DNA duplex stability.

Single and dual-labeled fluorescent oligodeoxynucleotides are used in many molecular biology applications. We investigated the effects of commonly used fluorescent dyes and quenchers on the thermodynamic stability of a model probe-target DNA duplex. We demonstrate that those effects can be significant. Fluorescent dyes and quenchers were attached to the probe ends. In certain combinations, these groups stabilized the duplex up to 1.8kcal/mol and increased T(m) up to 4.3 degrees C. None of the groups tested significantly destabilized the duplex. Rank order of potency was, starting with the most stabilizing group: Iowa Black RQ approximately Black Hole 2>Cy5 approximately Cy3>Black Hole 1>QSY7 approximately Iowa Black FQ>Texas Red approximately TAMRA>FAM approximately HEX approximately Dabcyl>TET. Longer linkers decreased stabilizing effects. Hybridizations to targets with various dangling ends were also studied and were found to have only minor effects on thermodynamic stability. Depending on the dye/quencher combination employed, it can be important to include thermodynamic contributions from fluorophore and quencher when designing oligonucleotide probe assays.

Effects of sodium ions on DNA duplex oligomers: improved predictions of melting temperatures.

Melting temperatures, T(m), were systematically studied for a set of 92 DNA duplex oligomers in a variety of sodium ion concentrations ranging from 69 mM to 1.02 M. The relationship between T(m) and ln [Na(+)] was nonlinear over this range of sodium ion concentrations, and the observed melting temperatures were poorly predicted by existing algorithms. A new empirical relationship was derived from UV melting data that employs a quadratic function, which better models the melting temperatures of DNA duplex oligomers as sodium ion concentration is varied. Statistical analysis shows that this improved salt correction is significantly more accurate than previously suggested algorithms and predicts salt-corrected melting temperatures with an average error of only 1.6 degrees C when tested against an independent validation set of T(m) measurements obtained from the literature. Differential scanning calorimetry studies demonstrate that this T(m) salt correction is insensitive to DNA concentration. The T(m) salt correction function was found to be sequence-dependent and varied with the fraction of G.C base pairs, in agreement with previous studies of genomic and polymeric DNAs. The salt correction function is independent of oligomer length, suggesting that end-fraying and other end effects have little influence on the amount of sodium counterions released during duplex melting. The results are discussed in the context of counterion condensation theory.

Thermodynamic treatment of oligonucleotide duplex-simplex equilibria.

Thermodynamic formulations have been devised to obtain Delta G degrees values directly from spectroscopic data at a fixed common temperature in nucleic acid duplex-simplex melting curves. In addition, the dependence of melting on salt concentration has been expressed in terms of a stepwise stoichiometric representation, which leads to a specific equation for the partition of the added sodium ions between the different oligonucleotide forms.