Specification of female germline by microRNA orchestrated auxin signaling in Arabidopsis.

Germline determination is essential for species survival and evolution in multicellular organisms. In most flowering plants, formation of the female germline is initiated with specification of one megaspore mother cell (MMC) in each ovule; however, the molecular mechanism underlying this key event remains unclear. Here we report that spatially restricted auxin signaling promotes MMC fate in Arabidopsis. Our results show that the microRNA160 (miR160) targeted gene ARF17 (AUXIN RESPONSE FACTOR17) is required for promoting MMC specification by genetically interacting with the SPL/NZZ (SPOROCYTELESS/NOZZLE) gene. Alterations of auxin signaling cause formation of supernumerary MMCs in an ARF17- and SPL/NZZ-dependent manner. Furthermore, miR160 and ARF17 are indispensable for attaining a normal auxin maximum at the ovule apex via modulating the expression domain of PIN1 (PIN-FORMED1) auxin transporter. Our findings elucidate the mechanism by which auxin signaling promotes the acquisition of female germline cell fate in plants.

Dynamic changes in primexine during the tetrad stage of pollen development.

Formation of pollen wall exine is preceded by the development of several transient layers of extracellular materials deposited on the surface of developing pollen grains. One such layer is primexine (PE), a thin, ephemeral structure that is present only for a short period of time and is difficult to visualize and study. Recent genetic studies suggested that PE is a key factor in the formation of exine, making it critical to understand its composition and the dynamics of its formation. In this study, we used high-pressure frozen/freeze-substituted samples of developing Arabidopsis (Arabidopsis thaliana) pollen for a detailed transmission electron microscopy analysis of the PE ultrastructure throughout the tetrad stage of pollen development. We also analyzed anthers from wild-type Arabidopsis and three mutants defective in PE formation by immunofluorescence, carefully tracing several carbohydrate epitopes in PE and nearby anther tissues during the tetrad and the early free-microspore stages. Our analyses revealed likely sites where these carbohydrates are produced and showed that the distribution of these carbohydrates in PE changes significantly during the tetrad stage. We also identified tools for staging tetrads and demonstrate that components of PE undergo changes resembling phase separation. Our results indicate that PE behaves like a much more dynamic structure than has been previously appreciated and clearly show that Arabidopsis PE creates a scaffolding pattern for formation of reticulate exine.

Motor learning rapidly increases synaptogenesis and astrocytic structural plasticity in the rat cerebellum.

Motor-skill learning is associated with cerebellar synaptogenesis and astrocytic hypertrophy, but most of these assessments of cerebellar ultrastructure have been completed after one month of training. After one month of training, the motor-skills necessary to complete these tasks have been acquired for weeks. This experiment aimed to characterize cerebellar ultrastructure during the acquisition phase of motor-skill learning, at a point when performance is still improving. Male and female rats trained for four days on the acrobatic motor learning task, which involved traversing challenging obstacles such as narrow beams and ladders. Concurrently, rats in the motor control condition walked a flat alleyway requiring no skilled movements. After training was complete, all rats were euthanized, and tissue was prepared for electron microscopy. Unbiased stereology techniques were used to assess synaptic and astrocytic plasticity. Results indicated that during the initial days of training, female rats made fewer errors and had shorter latencies on the acrobatic course compared to male rats. However, there were no sex differences in cerebellar ultrastructure. Male and female rats that completed four days of acrobatic training displayed an increase in the density of parallel fiber-Purkinje cell synapses per Purkinje cell and an increase in astrocytic volume, relative to rats in the motor control group.

Aerobic exercise increases sprouting angiogenesis in the male rat motor cortex.

Exercise is beneficial to brain health, and historically, the advantageous effects of exercise on the brain have been attributed to neuronal plasticity. However, it has also become clear that the brain vascular system also exhibits plasticity in response to exercise. This plasticity occurs in areas involved in movement, such as the motor cortex. This experiment aimed to further characterize the effects of exercise on structural vascular plasticity in the male rat motor cortex, by specifically identifying whether features of angiogenesis, the growth of new capillaries, or changes in vessel diameter were present. Male rats in the exercise group engaged in a 5-week bout of voluntary wheel running, while a second group of rats remained sedentary. After the exercise regimen, vascular corrosion casts, resin replicas of the brain vasculature, were made for all animals and imaged using a scanning electron microscope. Results indicate sprouting angiogenesis was the primary form of structural vascular plasticity detected in the motor cortex under these aerobic exercise parameters. Additionally, exercised rats displayed a slight increase in capillary diameter and expanded endothelial cell nuclei diameters in this region.

Pollen Aperture Factor INP1 Acts Late in Aperture Formation by Excluding Specific Membrane Domains from Exine Deposition.

Accurate placement of extracellular materials is a critical part of cellular development. To study how cells achieve this accuracy, we use formation of pollen apertures as a model. In Arabidopsis (Arabidopsis thaliana), three regions on the pollen surface lack deposition of pollen wall exine and develop into apertures. In developing pollen, Arabidopsis INAPERTURATE POLLEN1 (INP1) protein acts as a marker for the preaperture domains, assembling there into three punctate lines. To understand the mechanism of aperture formation, we studied the dynamics of INP1 expression and localization and its relationship with the membrane domains at which it assembles. We found that INP1 assembly occurs after meiotic cytokinesis at the interface between the plasma membrane and the overlying callose wall, and requires the normal callose wall formation. Sites of INP1 localization coincide with positions of protruding membrane ridges in proximity to the callose wall. Our data suggest that INP1 is a late-acting factor involved in keeping specific membrane domains next to the callose wall to prevent formation of exine at these sites.

Slanted support window-based stereo matching for surface reconstruction of microscopic samples.

This work is to address the limitations of 2D Scanning Electron Microscopy (SEM) micrographs in providing 3D topographical information necessary for various types of analysis in biological and biomedical sciences as well as mechanical and material engineering by investigating modern stereo vision methodologies for 3D surface reconstruction of microscopic samples. To achieve this, micrograph pairs of the microscopic samples are acquired by utilizing an SEM equipped with motor controlled specimen stage capable of precise translational, rotational movements and tilting of the specimen stage. After pre-processing of the micrographs by SIFT feature detection/description followed by RANSAC for matching outlier removal and stereo rectification, a dense stereo matching methodology is utilized which takes advantage of slanted support window formulation for sub-pixel accuracy stereo matching of the input images. This results in a dense disparity map which is used to determine the true depth/elevation of individual surface points. This is a major improvement in comparison to previous matching methodologies which require additional post-processing refinement steps to reduce the negative effects of discrete disparity assignment or the blurring artifacts in near the edge regions. The provided results are great representatives of the superior performance of the slanted support window assumption employed here for surface reconstruction of microscopic samples.

Three-dimensional reconstruction of highly complex microscopic samples using scanning electron microscopy and optical flow estimation.

Scanning Electron Microscope (SEM) as one of the major research and industrial equipment for imaging of micro-scale samples and surfaces has gained extensive attention from its emerge. However, the acquired micrographs still remain two-dimensional (2D). In the current work a novel and highly accurate approach is proposed to recover the hidden third-dimension by use of multi-view image acquisition of the microscopic samples combined with pre/post-processing steps including sparse feature-based stereo rectification, nonlocal-based optical flow estimation for dense matching and finally depth estimation. Employing the proposed approach, three-dimensional (3D) reconstructions of highly complex microscopic samples were achieved to facilitate the interpretation of topology and geometry of surface/shape attributes of the samples. As a byproduct of the proposed approach, high-definition 3D printed models of the samples can be generated as a tangible means of physical understanding. Extensive comparisons with the state-of-the-art reveal the strength and superiority of the proposed method in uncovering the details of the highly complex microscopic samples.

SD-SEM: sparse-dense correspondence for 3D reconstruction of microscopic samples.

Scanning electron microscopy (SEM) imaging has been a principal component of many studies in biomedical, mechanical, and materials sciences since its emergence. Despite the high resolution of captured images, they remain two-dimensional (2D). In this work, a novel framework using sparse-dense correspondence is introduced and investigated for 3D reconstruction of stereo SEM images. SEM micrographs from microscopic samples are captured by tilting the specimen stage by a known angle. The pair of SEM micrographs is then rectified using sparse scale invariant feature transform (SIFT) features/descriptors and a contrario RANSAC for matching outlier removal to ensure a gross horizontal displacement between corresponding points. This is followed by dense correspondence estimation using dense SIFT descriptors and employing a factor graph representation of the energy minimization functional and loopy belief propagation (LBP) as means of optimization. Given the pixel-by-pixel correspondence and the tilt angle of the specimen stage during the acquisition of micrographs, depth can be recovered. Extensive tests reveal the strength of the proposed method for high-quality reconstruction of microscopic samples.

Pollen wall degradation in the Brassicaceae permits cell emergence after pollination.

PREMISE OF THE STUDY: Despite attempts to degrade the sporopollenin in pollen walls, this material has withstood a hundred years of experimental treatments and thousands of years of environmental attack in insects and soil. We present evidence that sporopollenin, nonetheless, locally degrades only minutes after pollination in Arabidopsis thaliana flowers, and describe here a two-part pollen germination mechanism in A. thaliana involving both chemical weakening of the exine wall and swelling of the underlying intine. METHODS: We explored naturally occurring components from pollen and stigma surfaces and found a tripartite mix of hydrogen peroxide, peroxidase and catalase enzymes (all at high levels at the pollination interface) to be experimentally sufficient to degrade the sporopollenin of some Brassicaceae family members. KEY RESULTS: At pollination, factors carried on the pollen surface may mix with factors on the stigma surface in a reaction that locally oxidizes the exine pollen wall. Hydrogen peroxide, catalases, and peroxidases are biologically present at the right time and place and, when mixed experimentally, are sufficient to degrade the walls of susceptible pollen. CONCLUSIONS: Our work on native biochemistry for breaching sporopollenin suggests new research directions in pollen aperture evolution and could aid efforts to analyze sporopollenin's composition, needed for application of this corrosion-resistant, but long-intractable material.

Control of Anther Cell Differentiation by the Small Protein Ligand TPD1 and Its Receptor EMS1 in Arabidopsis.

A fundamental feature of sexual reproduction in plants and animals is the specification of reproductive cells that conduct meiosis to form gametes, and the associated somatic cells that provide nutrition and developmental cues to ensure successful gamete production. The anther, which is the male reproductive organ in seed plants, produces reproductive microsporocytes (pollen mother cells) and surrounding somatic cells. The microsporocytes yield pollen via meiosis, and the somatic cells, particularly the tapetum, are required for the normal development of pollen. It is not known how the reproductive cells affect the differentiation of these somatic cells, and vice versa. Here, we use molecular genetics, cell biological, and biochemical approaches to demonstrate that TPD1 (TAPETUM DETERMINANT1) is a small secreted cysteine-rich protein ligand that interacts with the LRR (Leucine-Rich Repeat) domain of the EMS1 (EXCESS MICROSPOROCYTES1) receptor kinase at two sites. Analyses of the expressions and localizations of TPD1 and EMS1, ectopic expression of TPD1, experimental missorting of TPD1, and ablation of microsporocytes yielded results suggesting that the precursors of microsporocyte/microsporocyte-derived TPD1 and pre-tapetal-cell-localized EMS1 initially promote the periclinal division of secondary parietal cells and then determine one of the two daughter cells as a functional tapetal cell. Our results also indicate that tapetal cells suppress microsporocyte proliferation. Collectively, our findings show that tapetal cell differentiation requires reproductive-cell-secreted TPD1, illuminating a novel mechanism whereby signals from reproductive cells determine somatic cell fate in plant sexual reproduction.

3DSEM++: Adaptive and intelligent 3D SEM surface reconstruction.

Structural analysis of microscopic objects is a longstanding topic in several scientific disciplines, such as biological, mechanical, and materials sciences. The scanning electron microscope (SEM), as a promising imaging equipment has been around for decades to determine the surface properties (e.g., compositions or geometries) of specimens by achieving increased magnification, contrast, and resolution greater than one nanometer. Whereas SEM micrographs still remain two-dimensional (2D), many research and educational questions truly require knowledge and facts about their three-dimensional (3D) structures. 3D surface reconstruction from SEM images leads to remarkable understanding of microscopic surfaces, allowing informative and qualitative visualization of the samples being investigated. In this contribution, we integrate several computational technologies including machine learning, contrario methodology, and epipolar geometry to design and develop a novel and efficient method called 3DSEM++ for multi-view 3D SEM surface reconstruction in an adaptive and intelligent fashion. The experiments which have been performed on real and synthetic data assert the approach is able to reach a significant precision to both SEM extrinsic calibration and its 3D surface modeling.

3DSEM: A 3D microscopy dataset.

The Scanning Electron Microscope (SEM) as a 2D imaging instrument has been widely used in many scientific disciplines including biological, mechanical, and materials sciences to determine the surface attributes of microscopic objects. However the SEM micrographs still remain 2D images. To effectively measure and visualize the surface properties, we need to truly restore the 3D shape model from 2D SEM images. Having 3D surfaces would provide anatomic shape of micro-samples which allows for quantitative measurements and informative visualization of the specimens being investigated. The 3DSEM is a dataset for 3D microscopy vision which is freely available at [1] for any academic, educational, and research purposes. The dataset includes both 2D images and 3D reconstructed surfaces of several real microscopic samples.

Ectopic expression of TAPETUM DETERMINANT1 affects ovule development in Arabidopsis.

Plants have evolved to extensively employ leucine-rich repeat receptor-like kinases (LRR-RLKs), the largest family of RLKs, to control growth, development, and defense. In Arabidopsis thaliana, the EXCESS MICROSPOROCYTES1 (EMS1) LRR-RLK and its potential small protein ligand TAPETUM DETERMINANT1 (TPD1) are specifically required for anther cell differentiation; however, TPD1 and EMS1 orthologs also control megaspore mother cell proliferation in rice and maize ovules. Here, the molecular function of TPD1 was demonstrated during ovule development in Arabidopsis using a gain-of-function approach. In ovules, the EMS1 gene was primarily expressed in nucellus epidermis and chalaza, whereas the expression of TPD1 was weakly restricted to the distal end of integuments. Ectopic expression of TPD1 caused pleiotropic defects in ovule and seed development. RNA sequencing analysis showed that ectopic expression of TPD1 altered expression of auxin signaling genes and core cell-cycle genes during ovule development. Moreover, ectopic expression of TPD1 not only affected auxin response but also enhanced expression of cyclin genes CYCD3;3 and CYCA2;3 in ovules. Thus, these results provide insight into the molecular mechanism by which TPD1-EMS1 signaling controls plant development possibly via regulation of auxin signaling and cell-cycle genes.

Recent advances in 3D SEM surface reconstruction.

The scanning electron microscope (SEM), as one of the most commonly used instruments in biology and material sciences, employs electrons instead of light to determine the surface properties of specimens. However, the SEM micrographs still remain 2D images. To effectively measure and visualize the surface attributes, we need to restore the 3D shape model from the SEM images. 3D surface reconstruction is a longstanding topic in microscopy vision as it offers quantitative and visual information for a variety of applications consisting medicine, pharmacology, chemistry, and mechanics. In this paper, we attempt to explain the expanding body of the work in this area, including a discussion of recent techniques and algorithms. With the present work, we also enhance the reliability, accuracy, and speed of 3D SEM surface reconstruction by designing and developing an optimized multi-view framework. We then consider several real-world experiments as well as synthetic data to examine the qualitative and quantitative attributes of our proposed framework. Furthermore, we present a taxonomy of 3D SEM surface reconstruction approaches and address several challenging issues as part of our future work.

Arabidopsis ETHE1 encodes a sulfur dioxygenase that is essential for embryo and endosperm development.

Mutations in human (Homo sapiens) ETHYLMALONIC ENCEPHALOPATHY PROTEIN1 (ETHE1) result in the complex metabolic disease ethylmalonic encephalopathy, which is characterized in part by brain lesions, lactic acidemia, excretion of ethylmalonic acid, and ultimately death. ETHE1-like genes are found in a wide range of organisms; however, the biochemical and physiological role(s) of ETHE1 have not been examined outside the context of ethylmalonic encephalopathy. In this study we characterized Arabidopsis (Arabidopsis thaliana) ETHE1 and determined the effect of an ETHE1 loss-of-function mutation to investigate the role(s) of ETHE1 in plants. Arabidopsis ETHE1 is localized in the mitochondrion and exhibits sulfur dioxygenase activity. Seeds homozygous for a DNA insertion in ETHE1 exhibit alterations in endosperm development that are accompanied by a delay in embryo development followed by embryo arrest by early heart stage. Strong ETHE1 labeling was observed in the peripheral and chalazal endosperm of wild-type seeds prior to cellularization. Therefore, ETHE1 appears to play an essential role in regulating sulfide levels in seeds.

The role of floral organs in carpels, an Arabidopsis loss-of-function mutation in MicroRNA160a, in organogenesis and the mechanism regulating its expression.

MicroRNAs (miRNAs) have emerged as key regulators of gene expression at the post-transcriptional level in both plants and animals. However, the specific functions of MIRNAs (MIRs) and the mechanisms regulating their expression are not fully understood. Previous studies showed that miR160 negatively regulates three genes that encode AUXIN RESPONSE FACTORs (ARF10, -16, and -17). Here, we characterized floral organs in carpels (foc), an Arabidopsis mutant with a Ds transposon insertion in the 3' regulatory region of MIR160a. foc plants exhibit a variety of intriguing phenotypes, including serrated rosette leaves, irregular flowers, floral organs inside siliques, reduced fertility, aberrant seeds, and viviparous seedlings. Detailed phenotypic analysis showed that abnormal cell divisions in the basal embryo domain and suspensor led to diverse defects during embryogenesis in foc plants. Further analysis showed that the 3' region was required for the expression of MIR160a. The accumulation of mature miR160 was greatly reduced in foc inflorescences. In addition, the expression pattern of ARF16 and -17 was altered during embryo development in foc plants. foc plants were also deficient in auxin responses. Moreover, auxin was involved in regulating the expression of MIR160a through its 3' regulatory region. Our study not only provides insight into the molecular mechanism of embryo development via MIR160a-regulated ARFs, but also reveals the mechanism regulating MIR160a expression.

Chlamydomonas mutants display reversible deficiencies in flagellar beating and axonemal assembly.

Axonemal complexes in flagella are largely prepackaged in the cell body. As such, one mutation often results in the absence of the co-assembled components and permanent motility deficiencies. For example, a Chlamydomonas mutant defective in RSP4 in the radial spoke (RS), which is critical for bend propagation, has paralyzed flagella that also lack the paralogue RSP6 and three additional RS proteins. Intriguingly, recent studies showed that several mutant strains contain a mixed population of swimmers and paralyzed cells despite their identical genetic background. Here we report a cause underlying these variations. Two new mutants lacking RSP6 swim processively and other components appear normally assembled in early log phase indicating that, unlike RSP4, this paralogue is dispensable. However, swimmers cannot maintain the typical helical trajectory and reactivated cell models tend to spin. Interestingly the motile fraction and the spokehead content dwindle during stationary phase. These results suggest that (1) intact RS is critical for maintaining the rhythm of oscillatory beating and thus the helical trajectory; (2) assembly of the axonemal complex with subtle defects is less efficient and the inefficiency is accentuated in compromised conditions, leading to reversible dyskinesia. Consistently, several organisms only possess one RSP4/6 gene. Gene duplication in Chlamydomonas enhances RS assembly to maintain optimal motility in various environments.

A new system for heterologous expression of membrane proteins: Rhodospirillum rubrum.

Heterologous expression of membrane proteins has met with only limited success. This work presents a new host/vector system for the production of heterologous membrane proteins based on a mutant of the facultatively phototrophic bacterium Rhodospirillum rubrum. Under certain growth conditions, R. rubrum forms an intracytoplasmic membrane (ICM) that houses the photosynthetic apparatus, the structural proteins of which are encoded by puhA and pufBALM. The mutant R. rubrum H2, which was constructed by allelic exchange deleting puhA and pufBALM, does not form ICM. This strain was used as a host for a plasmid expressing the Pseudomonas aeruginosa membrane protein MscL from the Rhodobacter capsulatus puc promoter. ICM was formed in the H2 strain producing MscL but not in the vector control strain. These results suggest that a heterologous membrane protein stimulates ICM formation in R. rubrum and indicate that the capacity to form an ICM that can accommodate heterologous proteins makes R. rubrum a host that will be useful for membrane protein production. P. aeruginosa MscL, which forms inclusion bodies when produced in Escherichia coli, was expressed in R. rubrum H2 and purified from membranes with a yield of 22.8-23.4 mg/L culture (5.53-5.60 mg/g cell paste). Additionally Streptomyces lividans KcsA and P. aeruginosa CycB were produced and purified from R. rubrum H2 with yields of 13.7-14.4 mg/L culture (2.19-2.55 mg/g cell paste) and 6.6-7.4 mg/L culture (1.1-1.2mg/g cell paste), respectively.

Influence of polyploidy on insect herbivores of native and invasive genotypes of Solidago gigantea (Asteraceae).

Herbivores are sensitive to the genetic structure of plant populations, as genetics underlies plant phenotype and host quality. Polyploidy is a widespread feature of angiosperm genomes, yet few studies have examined how polyploidy influences herbivores. Introduction to new ranges, with consequent changes in selective regimes, can lead to evolution of changes in plant defensive characteristics and also affect herbivores. Here, we examine how insect herbivores respond to polyploidy in Solidago gigantea, using plants derived from both the native range (USA) and introduced range (Europe). S. gigantea has 3 cytotypes in the US, with 2 of these present in Europe. We performed bioassays with generalist (Spodoptera exigua) and specialist (Trirhabda virgata) leaf-feeding insects. Insects were reared on detached leaves (Spodoptera) or potted host plants (Trirhabda) and mortality and mass were measured. Trirhabda larvae showed little variation in survival or pupal mass attributable to either cytotype or plant origin. Spodoptera larvae were more sensitive to both cytotype and plant origin: they grew best on European tetraploids and poorly on US diploids (high mortality) and US tetraploids (low larval mass). These results show that both cytotype and plant origin influence insect herbivores, but that generalist and specialist insects may respond differently.