Graft-artery junctions: design optimization and CAD development.

Designing and manufacturing of vascular prosthesis for arterial bypass grafts is a very complex problem. The process involves the selection of suitable geometry, materials of appropriate characteristics, and manufacturing technique capable of constructing prosthesis in a cost-effective manner. In this chapter, all engineering aspects related to the design and optimization of an artificial graft are presented and discussed. These aspects include CAD design of the graft, in vitro hemodynamic analysis to ensure good mechanical integrity and functionality, and optimization of the manufacturing techniques. Brief discussion is also given on the endothelization and vascularization of the artificial vessels and the future directions of the development of synthetic vessels for human implementation.

Numerical analysis of coronary artery bypass grafts: an over view.

Arterial bypass grafts tend to fail after some years due to the development of intimal thickening (restenosis). Non-uniform hemodynamics following a bypass operation contributes to restenosis and bypass failure can occur due to the focal development of anastomotic intimal hyperplasia. Additionally, surgical injury aggravated by compliance mismatch between the graft and artery has been suggested as an initiating factor for progress of wall thickening along the suture line Vascular grafts that are small in diameter tend to occlude rapidly. Computational fluid dynamics (CFD) methods have been effectively used to simulate the physical and geometrical parameters characterizing the hemodynamics of various arteries and bypass configurations. The effects of such changes on the pressure and flow characteristics as well as the wall shear stress during a cardiac cycle can be simulated. Recently, utilization of fluid and structure interactions have been used to determine fluid flow parameters and structure forces including stress and strains relationships under steady and transient conditions. In parallel to this, experimental diagnostics techniques such as Laser Doppler Anemometry, Particle Image Velocimetry, Doppler Guide wire and Magnetic Resonance Imaging have been used to provide essential information and to validate the numerical results. Moreover, clinical imaging techniques such as magnetic resonance or computed tomography have assisted considerably in gaining a detailed patient-specific picture of the blood flow and structure dynamics. This paper gives a review of recent numerical investigations of various configurations of coronary artery bypass grafts (CABG). In addition, the paper ends with a summary of the findings and the future directions.

Microwave sterilization of bovine pericardium for heart valve applications.

It is widely recognised that the bioprosthetic valves widely used for heart valve replacements have some drawbacks, for example tearing and occurrence of infections, which can be attributed to the fixation and sterilization techniques currently available. These techniques adversely affect the physical properties, functionality, and lifespan of the leaflets. In the work discussed in this paper we examined a novel procedure of using high-frequency microwaves to fix and disinfect the pericardium, without causing any harmful affects. The test bacteria used were Escherichia coli and Staphylococcus aureus. The pericardium was exposed to microwaves at a frequency of 18 GHz for three consecutive replicates. The findings indicated that there was almost complete inactivation of the bacteria on the biomaterial without compromising the biocompatibility, which was studied using ovine fibroblasts. An effective fixation and sterilization procedure, that is quick and has no adverse effects is presented and discussed.

Development of a novel pulsatile bioreactor for tissue culture.

The construction of tissue-engineered parts such as heart valves and arteries requires more than just the seeding of cells onto a biocompatible/biodegradable polymeric scaffold. It is essential that the functionality and mechanical integrity of the cell-seeded scaffold be investigated in vitro prior to in vivo implantation. The correct hemodynamic conditioning would lead to the development of tissues with enhanced mechanical strength and cell viability. Therefore, a bioreactor that can simulate physiological conditions would play an important role in the preparation of tissue-engineered constructs. In this article, we present and discuss the design concepts and criteria, as well as the development, of a multifunctional bioreactor for tissue culture in vitro. The system developed is compact and easily housed in an incubator to maintain sterility of the construct. Moreover, the proposed bioreactor, in addition to mimicking in vivo conditions, is highly flexible, allowing different types of constructs to be exposed to various physiological flow conditions. Initial verification of the hemodynamic parameters using Laser doppler anemometry indicated that the bioreactor performed well and produced the correct physiological conditions.

Polyethyleneterephthalate provides superior retention of endothelial cells during shear stress compared to polytetrafluoroethylene and pericardium.

BACKGROUND: Polyethyleneterephthalate (PET) and polytetrafluoroethylene (PTFE) are polymers successfully used as large diameter arterial grafts for peripheral vascular surgery. However, these prosthetic grafts are rarely used for coronary bypass surgery because of their low patency rates. Endothelialisation of the lumenal surface of these materials may improve their patency. This study aimed to compare the endothelialisation of PET, PTFE and pericardium by examining their seeding efficiency over time and the effect of various shear stresses on retention of endothelial cells. METHODS: Ovine endothelial cells at 4x10(5)cells/cm(2) were seeded onto PET, PTFE and pericardium, and cultured for 1-168 hours. Cell coverage was determined via en face immunocytochemistry and cell retention was quantified after being subjected to shear stresses ranging from 0.018 to 0.037N/m(2) for 15, 30 and 60 minutes. RESULTS: Endothelial cells adhered to all of the materials one hour post-seeding. PET exhibited better cell retention rate, ranging from 66.9+/-5.6% at 0.018N/m(2) for 15min to 44.7+/-1.9% at 0.037N/m(2) for 60 minutes, when compared to PTFE and pericardium (p<0.0001, three-way ANOVA). CONCLUSION: PET shows superior retention of endothelial cells during shear stress compare to PTFE and pericardium.