Exfoliated MXene-AuNPs hybrid in sensing and multiple catalytic hydrogenation reactions.

The increasing use of nanomaterials in consumer products is expected to lead to environmental contamination sometime soon. As water pollution is a pressing issue that threatens human survival and impedes the promotion of human health, the search for adsorbents for removing newly identified contaminants from water has become a topic of intensive research. The challenges in the recyclability of contaminated water continue to campaign the development of highly reusable catalysts. Although exfoliated 2D MXene sheets have demonstrated the capability towards water purification, a significant challenge for removing some toxic organic molecules remains a challenge due to a need for metal-based catalytic properties owing to their rapid response. In the present study, we demonstrate the formation of hybrid structure AuNPs@MXene (Mo2CTx) during the sensitive detection of Au nanoparticle through MXene sheets without any surface modification, and subsequently its applications as an efficient catalyst for the degradation of 4-nitrophenol (4-NP), methyl orange (MO), and methylene blue (MB). The hybrid structure (AuNPs@MXene) reveals remarkable reusability for up to eight consecutive cycles, with minimal reduction in catalytic efficiency and comparable apparent reaction rate constant (Kapp) values for 4-NP, MB, and MO, compared to other catalysts reported in the literature.

Two-dimensional antiferromagnetic nodal-line semimetal and spin Hall effect in MnC4.

Nodal-line semimetals, characterized by Dirac-like crossings along one dimensionalk-space lines, represent a unique class of topological materials. In this study, we investigate the intriguing properties of room-temperature antiferromagneticMnC4and its nodal-line features both with and without spin-orbit coupling (SOC). In the absence of SOC, we identify a doubly degenerate Dirac-nodal line, robustly protected by a combination of time-reversal, mirror, and partial-translation symmetries. Remarkably, this nodal line withstands various external perturbations, including isotropic and anisotropic strain, and torsional deformations, due to the ionic-like bonding between Mn atoms and C clusters. With the inclusion of SOC, we observe a distinctive quasi-Dirac-nodal line that emerges due to the interplay between antiferromagnetism and SOC-induced spin-rotation symmetry breaking. Finally, we observed a robust spin Hall conductivity that aligns with the energy range where the quasi-nodal line appears. This study presents a compelling example of a robust symmetry-protected Dirac-nodal line antiferromagnetic monolayer, which has potential for applications in next-generation spintronic devices.

Design and fabrication of a lightweight 3D first surface mirror aluminized by DC magnetron sputtering.

Aluminum thin films were deposited on a 3D prototype employing the direct current magnetron sputtering technique to fabricate a lightweight 3D first surface mirror. Before the aluminizing, the surface of the prototypes was evaluated with interferometry and atomic force microscope (AFM). The thin films were characterized using profilometry, UV-Vis spectroscopy, x-ray diffraction, AFM, x-ray photoelectron spectroscopy (XPS), and scanning electron microscopy. High adherence and homogeneous deposition of the aluminum's thin films were achieved. In addition, the purity of the material was confirmed by XPS analysis.

Comparative Study of the Antimicrobial Effect of Nanocomposites and Composite Based on Poly(butylene adipate-co-terephthalate) Using Cu and Cu/Cu2O Nanoparticles and CuSO4.

Nanocomposites and a composite based on poly(butylene adipate-co-terephthalate) (PBAT) were synthesized using commercial copper nanoparticles (Cu-NPs), copper/cuprous oxide nanoparticles (Cu|Cu2O-NPs), and copper sulfate (CuSO4), respectively. The Cu|Cu2O-NPs were synthesized using chemical reduction and characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The synthesis of Cu|Cu2O-NPs yielded a mixture of Cu and Cu2O, with metal Cu having a spherical morphology of approximately 40 nm in diameter and Cu2O with a diameter of 150 nm. To prepare the nanocomposites (NCs) and the composite material (MC), the NPs and the CuSO4 salt were incorporated into the PBAT matrix in concentrations of 1, 3, and 5% p/p via an ex situ method. Fourier transform infrared spectroscopy (FTIR), a tensile test, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and agar diffusion assays were used for structural, thermomechanical, and antimicrobial characterization. Results showed that the reinforcements did not modify the chemical structure of the PBAT and only slightly increased the percentage of crystallization. The mechanical and thermal properties of the PBAT did not change much with the addition of fillers, except for a slight increase in tensile strength and thermal stability, respectively. The agar diffusion antimicrobial assays showed that the NCs and MCs had good inhibitory responses against the nonresistant strains Enterococcus faecalis, Streptococcus mutans, and Staphylococcus aureus. The MCs based on CuSO4 had the highest biocidal effect, even against the resistant bacteria Acinetobacter baumannii.

Pb(core)/ZnO(shell) nanowires obtained by microwave-assisted method.

In this study, Pb-filled ZnO nanowires [Pb(core)/ZnO(shell)] were synthesized by a simple and novel one-step vapor transport and condensation method by microwave-assisted decomposition of zinc ferrite. The synthesis was performed using a conventional oven at 1000 W and 5 min of treatment. After synthesis, a spongy white cotton-like material was obtained in the condensation zone of the reaction system. HRTEM analysis revealed that product consists of a Pb-(core) with (fcc) cubic structure that preferentially grows in the [111] direction and a hexagonal wurtzite ZnO-(Shell) that grows in the [001] direction. Nanowire length was more than 5 µm and a statistical analysis determined that the shell and core diameters were 21.00 ± 3.00 and 4.00 ± 1.00 nm, respectively. Experimental, structural details, and synthesis mechanism are discussed in this study.

Deposition of Size-Selected Cu Nanoparticles by Inert Gas Condensation.

Nanometer size-selected Cu clusters in the size range of 1-5 nm have been produced by a plasma-gas-condensation-type cluster deposition apparatus, which combines a grow-discharge sputtering with an inert gas condensation technique. With this method, by controlling the experimental conditions, it was possible to produce nanoparticles with a strict control in size. The structure and size of Cu nanoparticles were determined by mass spectroscopy and confirmed by atomic force microscopy (AFM) and scanning electron transmission microscopy (STEM) measurements. In order to preserve the structural and morphological properties, the energy of cluster impact was controlled; the energy of acceleration of the nanoparticles was in near values at 0.1 ev/atom for being in soft landing regime. From SEM measurements developed in STEM-HAADF mode, we found that nanoparticles are near sized to those values fixed experimentally also confirmed by AFM observations. The results are relevant, since it demonstrates that proper optimization of operation conditions can lead to desired cluster sizes as well as desired cluster size distributions. It was also demonstrated the efficiency of the method to obtain size-selected Cu clusters films, as a random stacking of nanometer-size crystallites assembly. The deposition of size-selected metal clusters represents a novel method of preparing Cu nanostructures, with high potential in optical and catalytic applications.

Highly size-controlled synthesis of Au/Pd nanoparticles by inert-gas condensation.

Gold/Palladium nanoparticles were fabricated by inert-gas condensation on a sputtering reactor. With this method, by controlling both the atmosphere on the condensation chamber and the magnetron power, it was possible to produce nanoparticles with a high degree of monodispersity in size. The structure and size of the Au/Pd nanoparticles were determined by mass spectroscopy, and confirmed by atomic force microscopy and electron transmission microscopy measurements. The chemical composition was analyzed by X-ray microanalysis. From these measurements we confirmed that with the sputtering technique we are able to produce particles of 1, 3, and 5 nm on size, depending on the choice of the synthesis conditions. From TEM measurements made both in the regular HREM, as well as in STEM-HAADF mode, we found that the particles are icosahedral in shape, and the micrographs show no evidence of a core-shell structure, in contrast to what is observed in the case of nanoparticles prepared by chemical synthesis.