The Use of TADs in the Mandibular Arch to Prevent Proclination of the Lower Incisors during the Use of the Mini Scope Herbst Appliance.

Class II malocclusions are the most frequent within the Italian population. Normally, these malocclusions are caused by a reduction in a mandibular component whose functional stimulus is still very much cause for debate. The negative effect of all types of Class II functional appliances is in the proclination of the lower incisors, which, in subjects whose incisors are already labially inclined, must be checked at all times to avoid serious consequences to these elements. In this case study, a girl aged 14 years and 5 months presented with Class II malocclusion, 2nd division with a convex profile and a visibly retruded chin. The lower incisors presented a marked proclination (-1/Go-Gn ini = 107.7°) in a brachyfacial patient. To avoid further inclination of the lower incisors a Herbst appliance was mounted in two separate sittings. The first part of the appliance including the tubes was mounted to the upper jaw allowing the vestibularisation of the upper incisors in order to increase the overjet. Once this was obtained the lower part of the appliance was mounted together with the telescopic arms associated with two temporary anchorage devices (TADs) in positions 36-37 and 46-47, and an anterior section 33-43 with distal loop to which two double metallic ligatures were anchored at the TADs to contrast the negative effect of the appliance. At the end of the first functional phase, the treatment was refined using MBK fixed therapy to finish the case. The orthodontic therapy led to a visible improvement of the profile and the achievement of a first-class dental-skeletal result on both sides. From the cephalometric evaluation carried out immediately after the Herbst appliance treatment at time T1 and at the end of the orthodontic therapy T2 it was possible to verify a slight increase in the inclination of the lower incisors (-1/Go-Gn fin = 108°). In conclusion, it can be said that the use of the skeletal anchorage avoided, in this case, the proclination effect in the lower incisors due to the use of a Herbst appliance.

Efficacy of rehabilitation on reducing pain in muscle-related temporomandibular disorders: A systematic review and meta-analysis of randomized controlled trials.

BACKGROUND: Patients with temporomandibular disorders (TMD) mostly suffer from muscle-related pain. Several conservative interventions have been suggested as treatments for TMD in the last years. OBJECTIVE: The aim of this systematic review with meta-analysis was to assess the efficacy of rehabilitative approaches in reducing pain in patients with muscle-related TMD. METHODS: PubMed, Scopus, and Web of Science were systematically searched from inception until April 28th, 2021 to identify randomized controlled trials (RCTs) presenting: patients with painful muscle-related TMD; rehabilitative approaches as interventions; placebo or sham treatment as comparisons; pain intensity, using visual analogue scale as outcome. A meta-analysis was performed to evaluate the overall effect on painful muscle-related TMD patients. PROSPERO registration number of this systematic review is CRD42021251904. RESULTS: Out of 1997 papers suitable for title/abstract screening, 189 articles were assessed for eligibility. Sixteen RCTs were included and most of them (n= 6, 37.5%) investigated the effects of the laser therapy. The meta-analysis revealed that rehabilitative interventions had a significant overall effect size (ES) of 1.44 (p< 0.0001) in decreasing pain in patients with muscle-related disorders. CONCLUSION: Findings of this systematic review with meta-analysis suggested that rehabilitative approaches might be effective in reducing pain in muscle-related TMD patients. However, the low number of RCTs evaluating conservative approaches might impair the synthesis of evidence regarding the different techniques, calling for caution in the interpretation of these results.

A Simplified Digital Approach to the Treatment of a Postpuberty Patient with a Class III Malocclusion and Bilateral Crossbite.

Monolateral and bilateral crossbites are amongst the most frequent forms of malocclusion in the world population. The lack of early correction of this type of malocclusion leads to the partial or total ossification of the sutures which then require surgical treatment in adult patients. In recent years, devices on minipalatal screws have noticeably increased the time window in which it is possible to correct these types of alterations. In this case report, we show how it is possible to correct a third-class skeletal malocclusion associated with a posterior bilateral crossbite in a young woman using a rapid expander on miniscrews and fixed orthodontic device to finalise the process. The procedure for the insertion of the palatal screws was aided by the use of a digitally printed surgical guide, and the appliance was applied in the same sitting thanks to the use of a digital flow software and a systematic easy driver. The CBCT scans show how the orthopaedic expansion of the upper maxilla was obtained without any important alterations that damaged the permanent teeth. This case report wishes to demonstrate how easy and predictable it can be to resolve cases of this type with optimal aesthetic and functional results even when body growth has ended.

Can Orthodontic Treatment Be Stable 20 Years after the End of the Treatment Scheme? Treatment of a Class 2, Division 1 Malocclusion with Severe Skeletal Discrepancy and Its 20-Year Follow-Up.

Class II malocclusions, after class I malocclusions, are the most frequent in the juvenile Italian population. They are most often skeletal in origin and due to mandibular retrusion. Functional devices seem to have a beneficial effect on the growth of the jaw. Long-term maintenance of the achieved results is essential for therapeutic success in any orthodontic treatment; moreover, the retention phase should last as long as possible, especially in the lower anterior sector. A female patient aged 10 years and 3 months presented a visibly convex profile and a severe mandibular retrusion. The anamnesis brought to light the habit of oral breathing and lower-lip sucking. The cephalometric analysis showed a normodivergent skeletal class II. The first treatment phase involved the use of a Bass type for 12 months at the end of the functional treatment; the second phase of fixed therapy was carried out following the principles of bioprogressive techniques. The photos at the end of treatment show an important improvement in the profile; a full class I ratio of molar and canine teeth was achieved with an excellent interarch relationship and a correction of the V-shaped upper arch. The result is occlusally and profilometrically stable after 2, 4, 5, 10, 14, and 20 years. The maintenance of a stable orthodontic result over time is the result not only of a correct and physiological occlusion but also and above all of a correct diagnosis and correct identification of problems that can cause the malocclusion itself. Flawed habits such as interposition of the lower lip and oral breathing must be intercepted and corrected early in order to correct them and not affect the long-term result of orthodontic treatment. In this case, a functional device associated with an orthodontic fixed finishing and a correct retention phase were necessary to correctly treat a second-class mandibular retrusion whose result remained stable 20 years after the end of therapy.

Clinical Management of Hypodontia of Two Mandibular Incisors.

This article presents the clinical management of a patient with bilateral congenitally missing mandibular incisors. This condition is relatively rare and always needs a careful diagnosis and treatment planning. The chosen treatment strategy for this patient included space closure by protraction of the mandibular posterior teeth and canine substitution of missing incisors. Furthermore, the problems arising from this treatment plan, such as premolar-protected occlusion and tooth size discrepancy, are discussed. From the case presented in this study, we can conclude that space closure may be considered an efficient treatment approach for achieving satisfactory functional and aesthetic results.

Myofunctional Treatment of Anterior Crossbite in a Growing Patient.

The purpose of this case report is to add another means of treatment for the anterior crossbite malocclusion in early mixed dentition. The selected functional device is an eruption guidance appliance (EGA). The analysed patient had a functional anterior crossbite, a mandibular protrusion tendency, and a normodivergent growth pattern. The early treatment was suggested to correct the malocclusion and avoid unfavourable occlusal conditions that could end in a class III malocclusion growth pattern. After 18 months of treatment, with night-time use, the malocclusion was completely resolved. This therapy strategy allowed the correction of the sagittal jaws' relationship and maximum control of the vertical dimension. After 2 years of follow-up, the results were preserved. The peculiarity of this kind of intraoral orthodontic tools is the use of the erupting forces rather than the active forces. This early treatment of anterior crossbites with EGA may be considered an effective treatment approach for achieving good functional and aesthetic results.

Evaluation of Profile Changes in Class II Individuals Treated by Means of Herbst Miniscope Appliance.

BACKGROUND: To evaluate the profile changes following orthopedic/orthodontic treatment with the Herbst Miniscope® appliance in subjects affected with Class II malocclusion with mandibular retrusion. METHODS: A total of 44 patients presenting a skeletal Angle Class II malocclusion (ANB > 4°) due to mandibular retrusion and a cervical maturation stage between CS2 and CS3 were included in the study. Of these 44 patients, 22 (mean age 11.9 ± 1.3, HBT group) were treated using the Herbst appliance, while 22 (mean age 10.6 ± 1.3, CTR group) were followed for a 12-month observational period. A cephalometric tracing was performed at the beginning of treatment (T0) and after 12 months (T1). RESULTS: In both groups there was a significant advancement of soft tissue pogonion (HBT = 3.5 ± 3.0 mm, p < 0.001; CTR = 2.2 ± 2.9 mm, p < 0.001), but the difference between the two groups was not significant (p = 0.172). On the contrary, both groups had a significant advancement of the mandibular sulcus (HBT = 3.7 ± 2.8 mm, p < 0.001; CTR = 1.2 ± 2.2 mm, p < 0.001) and a lower lip protrusion (HBT = 3.45 ± 2.51 mm, p < 0.001; CTR = 1.7 ± 2.7 mm, p = 0.008), but in both cases the HBT group showed a statistically significant greater increase in sulcus protrusion (p = 0.002) and lower lip protrusion (p = 0.029) than controls. There were no statistically significant effects on the upper jaw. CONCLUSIONS: The Herbst appliance advanced the lower jaw soft tissues.

Prevalence of temporomandibular disorders and oral parafunctions in adolescents from public schools in Southern Italy.

Objective: The aim of this cross-sectional epidemiologic study was to estimate the prevalence of temporomandibular disorders (TMDs) and oral parafunctions in Italian adolescents and to assess the associations between age, gender, oral habits, and TMD. Methods: Three hundred sixty-one adolescents, aged 14-18 years, were examined for TMDs according to the Research Diagnostic Criteria for TMD. Furthermore, oral habits were explored by means of a written questionnaire. Results: Almost one-third of the sample (27.4%) showed at least one TMD diagnosis, with myofascial pain being the most prevalent. Gum chewing was the most prevalent oral habit. The female gender and oral habits were significantly associated with TMD. Conclusion: TMD in adolescents, although lower than in adults, are significantly prevalent. General practitioners should include TMD screening methods in their routine dental examinations of adolescent patients. Adolescents should be instructed on how to avoid incorrect oral behaviors that might predispose them to the onset of TMD.

Impact of functional orthodontic treatment on facial attractiveness of children with Class II division 1 malocclusion.

BACKGROUND/OBJECTIVES: Whether orthodontic treatment with functional appliances improves facial aesthetics is still under debate. This study aimed to determine whether functional orthodontic treatment improves the facial attractiveness of patients with Class II division 1 malocclusion. MATERIALS/METHOD: Extraoral lateral photographs of 20 children with Class I (CLI, 11.7 ± 0.8 years), and before (T1) and after treatment (T2) photographs of patients with Class II division 1 (CLII T1 and CLII T2; mean age ± SD = 11.1 ± 0.6 years) treated with functional appliances, were transformed into black silhouettes. Three panels of examiners including 30 orthodontists (39.0 ± 10.1 years), 30 dentists (40.0 ± 9.7) and 30 laypersons (39.0 ± 9.2) evaluated the attractiveness of patients' silhouettes using a 100-mm visual analogue scale, and the sagittal position of patients' upper lip, lower lip, and chin using a 3-point Likert scale. Two-way ANOVA and a chi-square test were used to test differences among groups. Statistically significance was set as P  <  0.05. RESULTS: The silhouettes of CLII T2 individuals were more attractive than those of the other groups (all Ps < 0.001). The upper lip, lower lip, and the chin of these individuals were judged to be normally positioned in 69.5 per cent, 74.9 per cent, and 72.3 per cent of the assessments, respectively (all Ps < 0.05). LIMITATIONS: This study did not account for the psychological profile of the examiners, which may have affected the ratings. CONCLUSIONS/IMPLICATIONS: Orthodontic treatment with functional appliances is associated with a superior facial profile attractiveness. Functional treatment should be considered as a treatment option to improve the facial appearance of children with Class II division 1 malocclusion.

IBTK Differently Modulates Gene Expression and RNA Splicing in HeLa and K562 Cells.

The IBTK gene encodes the major protein isoform IBTKα that was recently characterized as substrate receptor of Cul3-dependent E3 ligase, regulating ubiquitination coupled to proteasomal degradation of Pdcd4, an inhibitor of translation. Due to the presence of Ankyrin-BTB-RCC1 domains that mediate several protein-protein interactions, IBTKα could exert expanded regulatory roles, including interaction with transcription regulators. To verify the effects of IBTKα on gene expression, we analyzed HeLa and K562 cell transcriptomes by RNA-Sequencing before and after IBTK knock-down by shRNA transduction. In HeLa cells, 1285 (2.03%) of 63,128 mapped transcripts were differentially expressed in IBTK-shRNA-transduced cells, as compared to cells treated with control-shRNA, with 587 upregulated (45.7%) and 698 downregulated (54.3%) RNAs. In K562 cells, 1959 (3.1%) of 63128 mapped RNAs were differentially expressed in IBTK-shRNA-transduced cells, including 1053 upregulated (53.7%) and 906 downregulated (46.3%). Only 137 transcripts (0.22%) were commonly deregulated by IBTK silencing in both HeLa and K562 cells, indicating that most IBTKα effects on gene expression are cell type-specific. Based on gene ontology classification, the genes responsive to IBTK are involved in different biological processes, including in particular chromatin and nucleosomal organization, gene expression regulation, and cellular traffic and migration. In addition, IBTK RNA interference affected RNA maturation in both cell lines, as shown by the evidence of alternative 3'- and 5'-splicing, mutually exclusive exons, retained introns, and skipped exons. Altogether, these results indicate that IBTK differently modulates gene expression and RNA splicing in HeLa and K562 cells, demonstrating a novel biological role of this protein.

Late-Developing Supernumerary Premolars: Analysis of Different Therapeutic Approaches.

This case series describes the different potential approaches to late-developing supernumerary premolars (LDSP). LDSP are supernumerary teeth (ST) formed after the eruption of the permanent dentition; usually they develop in the premolar region of the upper and lower jaw. The choice to extract or to monitor the LDSP depends on many factors and has to be carefully planned due to the several risks that either the monitoring or the extraction could provoke. These four cases of LDSP showed different treatment plan alternatives derived from a scrupulous assessment of the clinical and radiographic information.

Association between posterior crossbite, skeletal, and muscle asymmetry: a systematic review.

BACKGROUND: Of the various malocclusions, unilateral posterior crossbite has often been associated to skeletal and muscular asymmetrical growth and function. OBJECTIVE: To assess, by systematically reviewing the literature, the association between unilateral posterior crossbite (UPCB) and morphological and/or functional asymmetries (i.e. skeletal, masticatory muscle electromyographic (EMG) performance, bite force, muscle thickness, and chewing cycle asymmetries). MATERIALS AND METHODS: A literature survey covering the period from January 1965 to June 2015 was performed. Two reviewers extracted the data independently and assessed the quality of the studies. RESULTS: The search strategy resulted in 2184 citations, of which 45 met the inclusion criteria. The scientific and methodological quality of these studies was medium-low, irrespective of the association reported. In several studies, posterior crossbite is reported to be associated to asymmetries in mandibular skeletal growth, EMG activity, and the chewing cycle. Fewer data are available on bite force and masticatory muscle thickness. CONCLUSIONS: The relationship between unilateral posterior crossbite and skeletal asymmetry is still unresolved. To date, most of the studies available report a skeletal asymmetric growth. EMG activity of masticatory muscles is different between crossbite and non-crossbite sides. Subjects with UPCB show smaller bite force than non-crossbite subjects. There is no consistency of studies reporting masticatory muscle thickness asymmetry in UPCB subjects. UPCB is associated to an increase in the reverse chewing cycle. The literature available on the subject is of medium-low scientific and methodological quality, irrespective of the association reported. Further investigations with higher sample size, well-defined diagnostic criteria, rigorous scientific methodologies, and long-term control are needed.

Influence of storage conditions on MALDI-TOF MS profiling of gingival crevicular fluid: Implications on the role of S100A8 and S100A9 for clinical and proteomic based diagnostic investigations.

Gingival crevicular fluid (GCF) may be a source of diagnostic biomarkers of periodontitis/gingivitis. However, peptide fingerprints may change, depending on GCF collection, handling and storage. We evaluated how storage conditions affect the quality and the reproducibility of MALDI-TOF profiles of this fluid. GCF was collected on paper strips from four subjects with healthy gingiva. Our findings demonstrated that sample storage conditions significantly affect GCF peptide pattern over time. Specifically, the storage of GCF immediately extracted from paper strips generates less variations in molecular profiles compared to the extraction performed after the storage. Significant spectral changes were detected for GCF samples stored at -20°C directly on the paper strips and extracted after three months, in comparison to the freshly extracted control. Noteworthy, a significant decrease in the peak area of HNP-3, S100A8, full-length S100A9 and its truncated form were detected after 3 months at -80°C. The alterations found in the "stored GCF" profile not only may affect the pattern-based biomarker discovery but also make its use not adequate for in vitro diagnostic test targeting S100A8, S100A9 proposed as potential diagnostic biomarkers for periodontal disease. In summary, this study shows that the best preserved signatures were obtained for the GCF samples eluted in trifluoroacetic acid and then immediately stored at -80°C for 1 month. The wealth of information gained from our data on protein/patterns stability after storage might be helpful in defining new protocols which enable optimal preservation of GCF specimen.

Correction of multiple canine impactions by mixed straightwire and cantilever mechanics: a case report.

Background. This case report describes the orthodontic treatment of a woman, aged 17 years, with a permanent dentition, brachyfacial typology, Angle Class I, with full impaction of two canines (13,33), and a severe ectopy of the maxillary left canine. Her main compliant was the position of the ectopic teeth. Methods. Straightwire fixed appliances, together with cantilever mechanics, were used to correct the impaired occlusion and to obtain an ideal torque control. Results and Conclusion. The treatment objectives were achieved in 26 months of treatment. The impactions were fully corrected with an optimal torque. The cantilever mechanics succeeded in obtaining tooth repositioning in a short lapse of time. After treatment, the dental alignment was stable.

Assessment of pre-analytical and analytical variables affecting peptidome profiling of gingival crevicular fluid by MALDI-TOF mass spectrometry.

BACKGROUND: Gingival crevicular fluid (GCF) may be a source of new biomarkers of periodontitis/gingivitis. However, the minute volumes of GCF harvested in healthy sites are a serious drawback. We evaluated how pre-analytical and analytical variables concerning GCF collection and processing, could significantly influence quality and reproducibility of MALDI-TOF profiles. METHODS: GCF was collected from healthy sites. The use of paper strips vs paper points was compared. Peptides and proteins were extracted by centrifugal elution in different solutions, at different accelerations, with and without protease inhibitor cocktail (PIC). Finally, we evaluated how matrix composition and matrix/sample volume ratio affect the reproducibility of MALDI-TOF profiles. RESULTS: Trifluoroacetic acid elution generated richer gingival fingerprints compared to acetic acid, independently of the collection device. Centrifugation speed and PIC supplementation did not change GCF profiles. A fine modulation of matrix composition and matrix/sample volume ratio resulted in a satisfactory reproducibility (CV less than 10% for peak area and signal-to-noise ratio). CONCLUSION: An optimized procedure, enabling generation of reproducible MALDI-TOF profiles from limited volume of GCF, is proposed. These fingerprints may serve as reference for future studies oriented to the maintenance and preservation of good gingival status and to discovery biomarkers of periodontitis/gingivitis.

Influence of vision on masticatory muscles function: surface electromyographic evaluation.

The role of the ocular disorders (OD) in pathogenesis of MMp is still a controversal issue. Ocular arc reflexes (OAR) may involve changes in head and neck posture and generate modifications of contraction resulting in muscle contraction and finally weakness. sEMG tests were performed on 28 patients (13 with masticatory muscles pain and myopia/15 healthy) in rest position with eyes open and eyes closed. Patients group control (healthy patients) showed no significance difference in sEMG record in open/close test. In non healthy patients there were great differences between the sEMG recordings with eyes closed and open. Temporalis and masseters showed a statistical difference of means activation in two tests (temporalis p = 0.0010; masseters = 0.0006). Great difference there was in means muscles activation between open eyes healthy test and non healthy. No difference in close eyes test was evaluated in temporalis and masseters close test in the two groups. The exact causes of MMp are still unknown. The role how ocular disorders (OD) may play an important role in pathogenesis of MMp is still a controversal issue. Ocular arc reflexes (OAR) may involve changes in head and neck posture and generate modifications of contraction resulting in muscle contraction and finally weakness.

Social impairment of individuals suffering from different types of chronic orofacial pain.

BACKGROUND: The daily life of patients suffering from orofacial pain is considerably impaired as compared to healthy subjects. The aim of this study was to investigate the influence of different categories of orofacial pain on the habitual life of adult individuals. METHODS: Seven hundred eighty-one individuals with orofacial pain were recruited from an initial sample of 1,058 patients. All the individuals were allocated to groups according to their diagnosis: myofascial pain (group A, 676 subjects, 525 females and 151 males; mean age ± SD = 35.2 ± 12.6), migraine (group B, 39 subjects, 29 females and 10 males; mean age ± SD 36.0 ± 10.7), and both myofascial pain and migraine (group C, 66 subjects, 56 females and 10 males, mean age ± SD = 35.6 ± 10.8). Characteristic pain intensity (CPI), disability days (DD), disability score (DS), and graded chronic pain intensity (GCPS) were calculated according to Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD) axis II. Depression and somatization (nonspecific physical symptoms) scores were also calculated. RESULTS: A significant association between groups and GCPS categories was found (p < 0.0001). Post hoc tests showed a significant difference between groups A and B and between A and C, but not between B and C. In group A, the most frequent GCPS score was grade II. The most frequent GCPS score in groups B and C was grade III, indicating a moderate limiting impairment. This score was more frequent in group B (41%) than in the other groups (group A = 20.6%, group C = 34.8%). GCPS grade IV was more frequent in group C (19.7%) than in the other groups. Group C had significantly higher scores for nonspecific physical symptoms than group A (p < 0.05). CONCLUSIONS: Myofascial pain and migraine sensibly affect the common daily life of adult individuals. The comorbidity of both conditions determines a major impairment.

Orthodontic management of congenitally missing maxillary lateral incisors: a case report.

This case report describes the orthodontic treatment of a woman, aged 15 years, with permanent dentition, brachyfacial typology, with congenitally missing maxillary lateral incisors. Multibracket straightwire fixed appliance was used to open the space for dental implant placement, and treat the impaired occlusion. The missing lateral incisors were substituted with oral implants.

Effects of intraoral aging on surface properties of coated nickel-titanium archwires.

OBJECTIVE: To evaluate the effects of intraoral aging on surface properties of esthetic and conventional nickel-titanium (NiTi) archwires. MATERIALS AND METHODS: Five NiTi wires were considered for this study (Sentalloy, Sentalloy High Aesthetic, Superelastic Titanium Memory Wire, Esthetic Superelastic Titanium Memory Wire, and EverWhite). For each type of wire, four samples were analyzed as received and after 1 month of clinical use by an atomic force microscope (AFM) and a scanning electronic microscope (SEM). To evaluate sliding resistance, two stainless steel plates with three metallic or three monocrystalline brackets, bonded in passive configuration, were manufactured; four as-received and retrieved samples for every wire were pulled five times at 5 mm/min for 1 minute by means of an Instron 5566, recording the greatest friction value (N). Data were analyzed by one-way analysis of variance and by Student's t-test. RESULTS: After clinical use, surface roughness increased considerably. The SEM images showed homogeneity for the as-received control wires; however, after clinical use esthetic wires exhibited a heterogeneous surface with craters and bumps. The lowest levels of friction were observed with the as-received Superelastic Titanium Memory Wire on metallic brackets. When tested on ceramic brackets, all the wires exhibited an increase in friction (t-test; P < .05). Furthermore, all the wires, except Sentalloy, showed a statistically significant increase in friction between the as-received and retrieved groups (t-test; P < .05). CONCLUSION: Clinical use of the orthodontic wires increases their surface roughness and the level of friction.

Temperature Profiles Along the Root with Gutta-percha Warmed through Different Heat Sources.

OBJECTIVES: To evaluate temperature profiles developing in the root during warm compaction of gutta-percha with the heat sources System B and System MB Obtura (Analityc Technology, Redmond, WA, USA). Thirty extracted human incisor teeth were used. Root canals were cleaned and shaped by means of Protaper rotary files (Dentsply-Maillefer, Belgium), and imaging was performed by micro-CT (Skyscan 1072, Aartselaar, Belgium). METHODS: Teeth were instrumented with K-type thermocouples, and the roots were filled with thermoplastic gutta-percha. Vertical compaction was achieved through the heat sources System B and System MB, and temperature profiles were detect-ed by means of NI Dac Interface controlled by the LabView System. With both heat sources, higher temperature levels were recorded in the region of the root far from the apex. When the warm plugger tip was positioned at a distance of 3 mm from the root apex, temperature levels of about 180°C were used to soften gutta-percha, and no statistically significant differences were observed between peak temperatures developed by the two heating sources at the root apex. However, a temperature level higher than 40°C was maintained for a longer time with System MB. RESULTS: Statistically significant differences were observed in peak temperature levels recorded far from the root apex. Thus, with a temperature of about 180°C and the warm plugger positioned at 3 mm from the root apex, both heating sources led to a temperature slightly higher than 40°C at the apex of the root, suggesting that the gutta-percha was properly softened. SIGNIFICANCE: A temperature level higher than 40°C was maintained for a longer time with System MB, thus providing an ad-equate time for warm compaction of the gutta-percha.