Ion exchange model for reversible sorption of divalent metals on calcite: implications for natural environments.

Most of the thermodynamic models available in the literature describing the speciation of the calcite surface do not predict a significant concentration of sorbed Ca(II), whereas previous electrokinetics studies clearly show that Ca(2+) is the main cation determining the potential of the calcite surface. This study proposes a new thermodynamic model based on ion-exchange theory that is able to describe the reversible sorption of Ca(2+) on calcite. To constrain the model, concentrations of Ca(II) sorbed reversibly on the mineral surface were obtained as a function of pH. Such experimental data were obtained using solutions in equilibrium with both calcite and fixed p(CO2(g)) values (from 10(-5) to 10(-2) atm). The concentration of (de)sorbed Ca(II) is almost constant in the [7-9.5] pH range, having a value of approximately 1.2 × 10(-6) ± 0.4 × 10(-7) eq·g(-1). Such a value agrees with total sorption site densities that were previously calculated by crystallography and is used to obtain a selectivity coefficient between H(+) and Ca(2+) species by fitting the experimental data. Then, selectivity coefficients between H(+) and different metallic cations (Zn(2+), Cd(2+), Pb(2+)) that are able to accurately describe previously published data are proposed. Finally, the model is used to predict the contribution of calcite in the overall sorption of Cd(II) on a natural and complex solid (calcareous aquifer sand).

New experimental approach for studying diffusion through an intact and unsaturated medium: a case study with Callovo-Oxfordian argillite.

The diffusion of tritiated water and anionic species was studied in an unsaturated core of Callovo-Oxfordian claystone, which is a potential host-rock for disposal of high-level radioactive wastes. The diffusion parameters in such conditions were determined using modified through-diffusion cells in which the suction is generated by the osmosis process. This specific device leads to values of saturation degree ranging from 81% to 100%. The results show that the diffusion through unsaturated samples is clearly slower than that in fully saturated samples, with steady-state fluxes decreasing by a factor up to 7 for tritium and up to 50 for anionic species. While tritium porosity values follow volumetric water contents (from 21 to 16%), the porosity accessible to anionic species significantly decreases (from 7.5 to 0.7%). Such diffusive behaviors have been modeled by means of a modified Archie's law, taking into account a critical water saturation below which no tracer can percolate. These results indicate that the largest pores, which are initially affected by dehydration, would play an important role on the connectivity of the porous medium. This would especially affect anionic species diffusion behavior because they are constrained to diffuse into the largest pores first.