Broadband polarization independent nanophotonic coupler for silicon waveguides with ultra-high efficiency.

Coupling of light to and from integrated optical circuits has been recognized as a major practical challenge since the early years of photonics. The coupling is particularly difficult for high index contrast waveguides such as silicon-on-insulator, since the cross-sectional area of silicon wire waveguides is more than two orders of magnitude smaller than that of a standard single-mode fiber. Here, we experimentally demonstrate unprecedented control over the light coupling between the optical fiber and silicon chip by constructing the nanophotonic coupler with ultra-high coupling efficiency simultaneously for both transverse electric and transverse magnetic polarizations. We specifically demonstrate a subwavelength refractive index engineered nanostructure to mitigate loss and wavelength resonances by suppressing diffraction effects, enabling a coupling efficiency over 92% (0.32 dB) and polarization independent operation for a broad spectral range exceeding 100 nm.

Experimental study of 112 Gb/s short reach transmission employing PAM formats and SiP intensity modulator at 1.3 µm.

We present a Silicon Photonic (SiP) intensity modulator operating at 1.3 µm with pulse amplitude modulation formats for short reach transmission employing a digital to analog converter for the RF signal generator, enabling pulse shaping and precompensation of the transmitter's frequency response. Details of the SiP Mach-Zehnder interfometer are presented. We study the system performance at various bit rates, PAM orders and propagation distances. To the best of our knowledge, we report the first demonstration of a 112 Gb/s transmission over 10 km of SMF fiber operating below pre-FEC BER threshold of 3.8 × 10(-3) employing PAM-8 at 37.4 Gbaud using a fully packaged SiP modulator. An analytical model for the Q-factor metric applicable for multilevel PAM-N signaling is derived and accurately experimentally verified in the case of Gaussian noise limited detection. System performance is experimentally investigated and it is demonstrated that PAM order selection can be optimally chosen as a function of the desired throughput. We demonstrate the ability of the proposed transmitter to exhibit software-defined transmission for short reach applications by selecting PAM order, symbol rate and pulse shape.

Analytical and experimental performance evaluation of an integrated Si-photonic balanced coherent receiver in a colorless scenario.

We study analytically and experimentally the performance limits of a Si-photonic (SiP) balanced coherent receiver (CRx) co-packaged with transimpedance amplifiers (TIAs) in a colorless WDM scheme. Firstly, the CRx architecture is depicted and characterization results are presented. Secondly, an analytical expression for the signal-to-noise ratio (SNR) at the CRx output is rigorously developed and various noise sources in the context of colorless reception are outlined. Thirdly, we study experimentally the system-level CRx performance in colorless reception of 16 × 112 Gbps PDM-QPSK WDM channels. Using a 15.5 dBm local oscillator (LO) power, error free transmissions over 4800 and 4160 km at received powers of -3 and -21 dBm per channel, respectively, were achieved in a fully colorless and preamplifierless reception. Next, a set of measurements on one of the center WDM channels is performed where the LO power, received signal power, distance, and number of channels presented to the CRx are swept to evaluate the performance limits of colorless reception. Results reveal that the LO beating with optical noise incoming with the signal is a dominant noise source regardless of received signal power. In the high received signal power regime (~0 dBm/channel), the self-beat noise from out-of-band (OOB) channels is an additional major noise source especially for small LO-to-signal power ratio, short reach and large number of OOB channels. For example, at a received signal power of 0 dBm/channel after 1600 km transmission, the SNR difference between the fully filtered and colorless scenarios, where 1 and 16 channels are passed to the CRx respectively, grows from 0.5 to 3.3 dB as the LO power changes from 12 to 0 dBm. For low received power (~-12 dBm/channel), the effect of OOB channels becomes minor while the receiver shot and thermal noises become more significant. We identify the common mode rejection ratio (CMRR) and sensitivity as the two important CRx specifications that impact the performance at high and low received signal power regimes, respectively. Finally, an excellent match between experimental and analytical SNRs is proven after the derived SNR model is fitted to the experimental data in a least-squares sense. The model is then used to predict that the CRx can operate colorlessly for a fully populated WDM spectrum with 80 channels provided that the LO-to-signal power ratio is properly set.

Characterization and reduction of spectral distortions in silicon-on-insulator integrated Bragg gratings.

A major issue in the fabrication of integrated Bragg grating filters in highly confined waveguides is the average effective index fluctuations caused by waveguide dimension variations. Lateral variations are caused by the sidewall roughness created during the etching process while vertical variations are coming from the wafer silicon layer thickness non-uniformity. Grating spectral distortions are known to result solely from the low spatial frequency components of these variations. As a result, in this work, we present an experimental method to quantify such relevant spatial components by stitching a hundred high-resolution scanning electron microscope images. Additionally, we propose two techniques to reduce, in the design, the phase noise impact on integrated Bragg gratings without relying on fabrication process improvements. More specifically, we show that the use of hybrid multimode/singlemode waveguides reduce by more than one order of magnitude the effect of sidewall roughness on integrated Bragg gratings while we show that the fabrication of ultra-compact gratings in spiral waveguides mitigate the impact of the silicon layer thickness variations.

Integrated Bragg gratings in spiral waveguides.

Over the last two decades, many filters requiring custom spectral responses were obtained from photo-inscribed fiber Bragg gratings because of the flexibility inherent to this technology. However, Bragg gratings in silicon waveguides have the potential to provide faster and more efficient tuning capabilities when compared to optical fiber devices. One drawback is that Bragg gratings filters with elaborate spectral amplitude and phase responses often require a long interaction length, which is not compatible with current integration trends in CMOS compatible photonic circuits. In this paper, we propose to make Bragg gratings in spiral-shaped waveguides in order to increase their lengths while making them more compact. The approach preserves the flexibility of regular straight grating structures. More specifically, we demonstrate 2-mm long gratings wrapped in an area of 200 µm x 190 µm without any spectral degradation due to waveguide curvature. Furthermore, we interleave three spiral waveguides with integrated gratings thereby tripling the density and demonstrate good phase compensation for each of them. Finally, we show that this approach is compatible with phase-apodization of the grating coupling coefficient.

Multiwavelength fiber laser based on the utilization of a phase-shifted phase-only sampled fiber Bragg grating.

A semiconductor-optical-amplifier-based fiber laser incorporating with a phase-shifted phase-only sampled fiber Bragg grating (FBG) is proposed and experimentally demonstrated. Thanks to the intrinsic property of the phase-shifted phase-only sampled FBG, the proposed approach has an unique advantage, enabling one to tune and switch all the wavelength lasing simultaneously. The obtained fiber laser has a stable output with more than 30 wavelengths lasing. The 3 dB linewidth is approximately 13 pm, the signal-to-noise ratio is larger than 50 dB, and the nonuniformity of the output is smaller than 7.4 dB.

Performance of balanced detection in a coherent receiver.

The quality of balanced detection in a coherent receiver is analyzed theoretically and experimentally. The impact of the characteristics of the optics on the balanced detection is presented. A parameter that characterizes the performance of the balanced detection suitable for the whole optical front-end is propose.

Multi-channel notch filter based on a phase-shift phase-only-sampled fiber Bragg grating.

We propose a novel method for the implementation of a tunable multi-channel notch filter based on a thermally induced phase-shift phase-only sampled fiber Bragg grating (FBG). The proposed method is numerically and experimentally demonstrated. A 51-channel notch filter with a bandwidth (FWHM) of 0.026 nm and a tuning range of 0.6 nm has been achieved. This proposed technique offers the potential applications to the multiwavelength fiber laser and multi-channel all optical logic devices.