Disordered RuO2 exhibits two dimensional, low-mobility transport and a metal-insulator transition.

The discovery of low-dimensional metallic systems such as high-mobility metal oxide field-effect transistors, the cuprate superconductors, and conducting oxide interfaces (e.g., LaAlO3/SrTiO3) has stimulated research into the nature of electronic transport in two-dimensional systems given that the seminal theory for transport in disordered metals predicts that the metallic state cannot exist in two dimensions (2D). In this report, we demonstrate the existence of a metal-insulator transition (MIT) in highly disordered RuO2 nanoskins with carrier concentrations that are one-to-six orders of magnitude higher and with mobilities that are one-to-six orders of magnitude lower than those reported previously for 2D oxides. The presence of an MIT and the accompanying atypical electronic characteristics place this form of the oxide in a highly diffusive, strong disorder regime and establishes the existence of a metallic state in 2D that is analogous to the three-dimensional case.

Porous Silicon-Based Quantum Dot Broad Spectrum Radiation Detector.

Silicon is a convenient and inexpensive platform for radiation detection, but has low stopping power for x-rays and gamma-rays with high energy (e.g., 100 keV, as used in computed tomography and digital radiography, or 1 MeV, as desired for detection of nuclear materials). We have effectively increased the stopping power of silicon detectors by producing a layer of porous or micro-machined silicon, and infusing this layer with semiconductor quantum dots made of electron-dense materials. Results of prototype detectors show sensitivity to infrared, visible light, and x-rays, with dark current of less than 1 nA/mm2.

Kinetics and mechanism of the reaction of methacrolein with chlorine atoms in 1-950 Torr of N2 or N2/O2 diluent at 297 K.

The rate constant of the reaction of Cl atoms with methacrolein (k(1)) has been measured relative to that of Cl with propane (k(2)) or cyclohexane (k(6)) at ambient temperature and pressures varying from 1-950 Torr. The experiments were carried out by irradiation (350 nm) of Cl(2)/methacrolein/propane or cyclohexane mixtures in N(2) or N(2)/O(2) diluent at ambient temperature in a spherical (500 cm(3)) Pyrex reactor (GC/FID analyses) or a 140 L FTIR smog chamber. The measured relative rate constant ratios in the GC/FID experiments were k(1)/k(2) = 1.464 +/- 0.015(2sigma) in N(2) and k(1)/k(2) = 1.68 +/- 0.03(2sigma) in N(2)/O(2) diluent (O(2) > 20,000 ppm). No pressure dependence was observed over the range studied in N(2) (120-950 Torr) using the GC/FID. In the FTIR/smog chamber experiments values of k(1)/k(6) = 0.645 +/- 0.032, 0.626 +/- 0.037, 0.586 +/- 0.026, and 0.479 +/- 0.024 were measured in 700, 100, 10, and 1 Torr, respectively, of N(2) diluent. Using k(2) = (1.4 +/- 0.2) x 10(-10) and k(6) = (3.3 +/- 0.5) x 10(-10) high pressure limiting rate constants of k(1) = (2.05 +/- 0.3) x 10(-10) [GC/FID] and (2.13 +/- 0.34) x 10(-10) [FTIR] cm(3) molecule(-1) s(-1) were determined. In experiments using the GC/FID reactor with N(2) diluent the following products (molar yields) were observed: 2,3-dichloro-2-methylpropanal [(47.2 +/- 8)% excluding error in calibration]; methacryloyl chloride [(22.9 +/- 2)%]; and 2-chloromethylacrolein [(2.3 +/- 0.8)%]. Addition of 200 ppm O(2) (with Cl(2) = 5000 ppm) resulted in a sharp reduction of the 2,3-dichloro-2-methylpropanal yield (to approximately 2%) with an accompanying appearance of chloroacetone [yield = (55 +/- 7)% decreasing to (44 +/- 7)% in air diluent]. The methacryloyl chloride yield was 23% for [O(2)]/[Cl(2)] ratios from 0 to 0.2 but decreased to near zero as the O(2)/Cl(2) ratio was increased to approximately 400. The variation in methacryloyl chloride yield with the O(2)/Cl(2) ratio in the initial mixture allowed an approximate measurement of the rate constant for the reaction of the methacryloyl radical with O(2) relative to that with Cl(2) (k(O(2))/k(Cl(2)) = 0.066 +/- 0.02). In experiments using the FTIR reactor in 700 Torr of N(2) diluent, methacryloyl chloride [(26 +/- 3)%] and HCl [(27 +/- 3)%] were observed as products. In 700 Torr of air diluent, the observed products were: chloroacetone [(44 +/- 5)%], CO(2) [(27 +/- 3)%], HCl [(21 +/- 3)%], and HCHO [(14 +/- 2)%], and CH(3)C(O)CH(2)OH (3-4%). The observation of CH(3)C(O)CH(2)OH indicates the presence of OH radicals in the system. At atmospheric pressure and 297 K, the title reaction proceeds [(24.5 +/- 5)%] via abstraction of the aldehydic hydrogen atom, [(2.3 +/- 0.8)%] via abstraction from the -CH(3) group, and approximately [(47 +/- 8) %] via addition to the CH(2)=C < double bond with most of the addition occurring at the terminal carbon atom (uncertainties represent statistical 2sigma). The results are discussed with respect to the literature data.

Kinetics, products, and stereochemistry of the reaction of chlorine atoms with cis- and trans-2-butene in 10-700 Torr of N2 or N2/O2 diluent at 297 K.

The reactions of Cl atoms with cis- and trans-2-butene have been studied using FTIR and GC analyses. The rate constant of the reaction was measured using the relative rate technique. Rate constants for the cis and trans isomers are indistinguishable over the pressure range 10-900 Torr of N2 or air and agree well with previous measurements at 760 Torr. Product yields for the reaction of cis-2-butene with Cl in N2 at 700 Torr are meso-2,3-dichlorobutane (47%), DL-2,3-dichlorobutane (18%), 3-chloro-1-butene (13%), cis-1-chloro-2-butene (13%), trans-1-chloro-2-butene (2%), and trans-2-butene (8%). The yields of these products depend on the total pressure. For trans-2-butene, the product yields are as follows: meso-2,3-dichlorobutane (48%), dl-2,3-dichlorobutane (17%), 3-chloro-1-butene (12%), cis-1-chloro-2-butene (2%), trans-1-chloro-2-butene (16%), and cis-2-butene (2%). The products are formed via addition, addition-elimination from a chemically activated adduct, and abstraction reactions. These reactions form (1) the stabilized 3-chloro-2-butyl radical, (2) the chemically activated 3-chloro-2-butyl radical, and (3) the methylallyl radical. These radicals subsequently react with Cl2 to form the products via a proposed chemical mechanism, which is discussed herein. This is the first detailed study of stereochemical effects on the products of a gas-phase Cl+olefin reaction. FTIR spectra (0.25 cm(-1) resolution) of meso- and DL-2,3-dichlorobutane are presented. The relative rate technique was used (at 900 Torr and 297 K) to measure: k(Cl + 3-chloro-1-butene) = (2.1 +/- 0.4) x 10(-10), k(Cl + 1-chloro-2-butene) = (2.2 +/- 0.4) x 10(-10), and k(Cl + 2,3-dichlorobutane) = (1.1 +/- 0.2) x 10(-11) cm3 molecule(-1) s(-1).