Solution synthesis of lead seeded germanium nanowires and branched nanowire networks and their application as Li-ion battery anodes.

Herein, we report the high density growth of lead seeded germanium nanowires (NWs) and their development into branched nanowire networks suitable for application as lithium ion battery anodes. The synthesis of the NWs from lead seeds occurs simultaneously in both the liquid zone (solution-liquid-solid (SLS) growth) and solvent rich vapor zone (vapor-liquid-solid (VLS) growth) of a high boiling point solvent growth system. The reaction is sufficiently versatile to allow for the growth of NWs directly from either an evaporated catalyst layer or from pre-defined nanoparticle seeds and can be extended to allowing extensive branched nanowire formation in a secondary reaction where these seeds are coated onto existing wires. The NWs are characterized using TEM, SEM, XRD and DF-STEM. Electrochemical analysis was carried out on both the single crystal Pb-Ge NWs and the branched Pb-Ge NWs to assess their suitability for use as anodes in a Li-ion battery. Differential capacity plots show both the germanium wires and the lead seeds cycle lithium and contribute to the specific capacity that is approximately 900 mAh g-1 for the single crystal wires, rising to approximately 1100 mAh g-1 for the branched nanowire networks.

Nanowire Heterostructures Comprising Germanium Stems and Silicon Branches as High-Capacity Li-Ion Anodes with Tunable Rate Capability.

Here we report the rational design of a high-capacity Li-ion anode material comprising Ge nanowires with Si branches. The unique structure provides an electrode material with tunable properties, allowing the performance to be tailored for either high capacity or high rate capability by controlling the mass ratio of Si to Ge. The binder free Si-Ge branched nanowire heterostructures are grown directly from the current collector and exhibit high capacities of up to ∼1800 mAh/g. Rate capability testing revealed that increasing the Ge content within the material boosted the performance of the anode at fast cycling rates, whereas a higher Si content was optimal at slower rates of charge and discharge. Using ex-situ electron microscopy, Raman spectroscopy and energy dispersive X-ray spectroscopy mapping, the composition of the material is shown to be transient in nature, transforming from a heterostructure to a Si-Ge alloy as a consequence of repeated lithiation and delithiation.

Colloidal synthesis of homogeneously alloyed CdSe(x)S(1-x) nanorods with compositionally tunable photoluminescence.

Homogenously alloyed CdSe(x)S(1-x) nanorods with controlled aspect ratios are synthesised by a hot-injection colloidal route. The optical absorption and photoluminescence emission are compositionally tunable with chalcogen ratios. The synthetic protocol is sufficiently robust to allow good control of rod aspect ratios, with low polydispersities, suited for their rational assembly into superstructures.

Flow-based solution-liquid-solid nanowire synthesis.

Discovered almost two decades ago, the solution-liquid-solid (SLS) method for semiconductor nanowire synthesis has proven to be an important route to high-quality, single-crystalline anisotropic nanomaterials. In execution, the SLS technique is similar to colloidal quantum-dot synthesis in that it entails the injection of chemical precursors into a hot surfactant solution, but mechanistically it is considered the solution-phase analogue to vapour-liquid-solid (VLS) growth. Both SLS and VLS methods make use of molten metal nanoparticles to catalyse the nucleation and elongation of single-crystalline nanowires. Significantly, however, the methods differ in how chemical precursors are introduced to the metal catalysts. In SLS, precursors are added in a one-off fashion in a flask, whereas in VLS they are carried by a flow of gas through the reaction chamber, and by-products are removed similarly. The ability to dynamically control the introduction of reactants and removal of by-products in VLS synthesis has enabled a degree of synthetic control not possible with SLS growth. We show here that SLS synthesis can be transformed into a continuous technique using a microfluidic reactor. The resulting flow-based SLS ('flow-SLS') platform allows us to slow down the synthesis of nanowires and capture mechanistic details concerning their growth in the solution phase, as well as synthesize technologically relevant axially heterostructured semiconductor nanowires, while maintaining the propensity of SLS for accessing ultrasmall diameters below 10 nm.

Synthesis and characterization of a block copolymer containing regioregular poly(3-hexylthiophene) and poly(γ-benzyl-L-glutamate).

Poly(3-hexylthiophene)-b-poly(γ-benzyl-L-glutamate) (P3HT-b-PBLG) rod-rod diblock copolymer was synthesized by a ring-opening polymerization of γ-benzyl-L-glutamate-N-carboxyanhydride using a benzylamine-terminated regioregular P3HT macroinitiator. The opto-electronic properties of the diblock copolymer have been investigated. The P3HT precursor and the P3HT-b-PBLG have similar UV-Vis spectra both in solution and solid state, indicating that the presence of PBLG block does not decrease the effective conjugation length of the semiconducting polythiophene segment. The copolymer displays solvatochromic behavior in THF/water mixtures. The morphology of the diblock copolymer depends upon the solvent used for film casting and annealing results in morphological changes for both films deposited from chloroform and trichlorobenzene.

Polymers containing rigid benzodithiophene repeating unit with extended electron delocalization.

Polymers containing a fused benzodithiophene core with phenylethynyl substituents were prepared. The parent poly[4,8-bis(4-pentylphenylethynyl)benzo[1,2-b:4,5-b']dithiophene] was prepared by a Stille coupling. Copolymers with the new core were also obtained by Stille coupling with dibrominated fluorene and carbazole monomers. The obtained polymers had a lower band gap as compared to the related benzodithiophene cores due to the extended electron conjugation. The polymers were also highly fluorescent as observed by high quantum yields.

A metal nanoparticle-based supramolecular approach for aqueous biphasic reactions.

beta-cyclodextrin immobilized on Pd nanoparticles was successfully employed as an efficient phase-transfer catalyst in aqueous biphasic hydrogenation reactions.

Construction of conjugated molecular structures on gold nanoparticles via the Sonogashira coupling reactions.

Functional, conjugated molecular structures have been fabricated on Au nanoparticles via the Sonogashira coupling reactions.

Supramolecular control of complexation-induced fluorescence change of water-soluble, beta-cyclodextrin-modified CdS quantum dots.

The fluorescence of beta-cyclodextrin-modified CdS quantum dots can be reversibly tuned by introducing different substrates in aqueous media.