ABSTRACT
The success of osseointegration depends on many factors. With temperatures beyond a 47 °C threshold over 1 min, bone survival may be impaired. The purpose of the study was to evaluate, in fresh human cadaver tibiae, the temperature changes during osteotomy preparations using two straight and two tapered implant systems' drills, external irrigation, and varying revolutions per minute (RPM). The tibiae from a fresh female cadaver were harvested bilaterally. Two tapered and two straight design drills were assessed. Two-hundred and forty osteotomies were prepared at 6 mm depth following the drill sequence of the manufacturers' protocol for each drilling speed. Difference in temperature (ΔΤ) was calculated by subtracting the baseline from the maximum temperature (ΔT = Tmax - Tbase). Drill design and drill diameter, as independent variables or synergistically, had a significant effect on ΔΤ. Tapered drills: As the drill diameter increased, ΔΤ increased at all RPM. Straight drills: As the drill diameter increased, ΔΤ remained constant or slightly decreased at all RPM. Drill diameter and design had a significant effect on ΔΤ in human tibiae, which never exceeded the critical threshold of 47 °C. Tapered drills caused significantly greater heat production compared to straight drills.
ABSTRACT
Human derived composite amnion-chorion membrane (ACM) has been used to facilitate wound healing due to reported anti-inflammatory properties and promotion of cell proliferation. This study aimed to assess the antimicrobial properties of the ACM using novel methods to visualize the antimicrobial efficacy of membranes in situ at different time points. Porcine Pericardium Collagen Membranes (PPCM) served as membrane controls. Circular pieces of the membranes were used in three different assays: insert, agar contact and glass-bottom well assays. Streptococcus gordonii were spotted onto the membranes and the plates were subsequently centrifuged to ensure direct bacterial contact with the membranes in the insert and agar contact assays, thus better mimicking bacterial adherence in the oral cavity. After incubation at 37 °C for 8, 24, and 48 hours, the membranes were dyed with the Live/Dead BacLight Bacterial Viability fluorescence stain and analyzed via confocal microscopy. The results demonstrated that the ACM completely inhibited bacterial growth at all time points, whereas the PPCM did not demonstrate any antimicrobial properties. Within the limits of this study, the ACM showed extremely high antimicrobial efficacy against oral streptococci. In addition, our methods may be useful in assessing antimicrobial properties for biomaterials with minimum diffusion ability, when traditional assessment methods are not applicable.
