Identification of a drug degradation product found in a stressed dosage form using LC/MSn, LC/TOF MS and on-line H/D exchange MS.

An unknown degradation product was found when a dosage form was stressed under base and heat. Comprehensive LC-MS studies have been conducted to identify this degradation product. The approach included the use of an ion-trap MS for MS(n) ion fragmentation patterns, a time-of-flight (TOF) MS to measure the accurate mass for its potential chemical formula, and on-line hydrogen/deuterium (H/D) exchange LC-MS to determine the number of exchangeable hydrogen atoms in the gradation product. Based upon the above LC-MS results, the unknown was identified to result from the conversion of a trifluoromethyl moiety in the drug substance to a carboxylic acid under the combination of thermal and base stress. Different ion fragmentation pathways between the drug substance and its degradation product were discussed. The reaction mechanism was proposed to be nucleophilic substitution through S(N)2 mechanism.

A multidisciplinary approach to identify a degradation product in a pharmaceutical dosage form.

An unknown degradation product found in non-MS compatible HPLC analysis was studied using a multidisciplinary approach. The unknown was separated and isolated from other components in the drug product by HPLC followed by ion trap MS to obtain MS(n) fragmentation patterns. Its chemical formula was determined using a high resolution time-of-flight mass spectrometer (TOF MS). Nuclear Magnetic Resonance (NMR) was used to elucidate the molecular structure. The impurity was identified as 5-hydroxymethyl furfural, which was a degradation product of lactose, one of the excipients used in the formulation of this dosage form.

Identification of pharmaceutical impurities in formulated dosage forms.

Structure elucidation of pharmaceutical impurities is an important part of the drug product development process. Impurities can have unwanted pharmacological or toxicological effects that seriously impact product quality and patient safety. This review focuses on current analytical strategies for chemical and structural identification of pharmaceutical impurities. Potential sources and mechanisms of impurity formation are discussed for both drug substance and drug product applications. The utility of liquid chromatography-mass spectrometry (LC/MS) for providing structure-rich information is highlighted throughout this review. Other hyphenated analytical techniques including LC/nuclear magnetic resonance, gas chromatography/MS, and size-exclusion chromatography/chemiluminescent nitrogen detectors are also discussed, as LC/MS alone sometimes cannot reveal or confirm the final structures as required during dosage form development.

Investigation of Metformin HCl lot-to-lot variation on flowability differences exhibited during drug product processing.

The purpose of this study was to determine the cause for flowability difference observed during drug product processing when different Metformin HCl drug substance batches of varying age were used. It was found that the lead time (age) between the final step (milling) in the manufacturing process of the Metformin HCl drug substance could be a factor. The lead time had an impact on flowability of Metformin/excipient blends during drug product processing even though these batches had no apparent differences in their release specifications. To study and understand the aging effect, two batches of Metformin HCl manufactured at different periods of time were selected. The surface energy values obtained by the density functional theory (DFT) method together with X-ray diffraction patterns, thermally stimulated current measurements, and dynamic vapor sorption isotherms indicated that the freshly manufactured Metformin HCl material contains detectable amounts of surface crystal defects, but are absent in aged sample, which could be the cause of flowability differences of Metformin/excipient blends observed during the drug product processing. Having identified the cause for different flow behavior, a method to destroy these defects was designed and the issue was resolved by rapid aging of Metformin HCl under humidity at room temperature.

Combined application of high resolution and tandem mass spectrometers to characterize methionine oxidation in a parathyroid hormone formulation.

Identification and monitoring of degradation products is a critical aspect of drug product stability programs. This process can present unique challenges when working with complex biopharmaceutical formulations that do not readily lend themselves to straightforward HPLC analysis. The therapeutic 34 amino acid parathyroid hormone fragment (PTH1-34) contains methionine (Met) residues at positions 8 and 18. Oxidation of these Met residues results in reduced biological activity and thus efficacy of the potential drug product. Here, we present an effective approach for the identification of PTH1-34 oxidation products in a drug product formulation in which the stability indicating method used non-MS compatible HPLC conditions to separate excipients, drug substance and degradation products. High resolution and tandem mass spectrometers were used in conjunction with cyanogen bromide (CNBr) mediated digestion to accurately identify the oxidation products observed in an alternative MS compatible HPLC method used for drug substance analysis. All anticipated CNBr digested peptide fragments, including both oxidized and nonoxidized peptide fragments, were positively identified using TOF MS without the need for additional enzymatic digestion. Once identified, the oxidation products generated were injected onto the original non-MS compatible HPLC drug product stability indicating method and the respective retention times were confirmed. This allowed the oxidative stability of different formulations to be effectively monitored during the solid state stability program and during variant selection.

Application of surface area measurement for identifying the source of batch-to-batch variation in processability.

The primary goal of this study was to evaluate the use of specific surface area as a measurable physical property of materials for understanding the batch-to-batch variation in the flow behavior. The specific surface area measurements provide information about the nature of the surface making up the solid, which may include defects or void space on the surface. These void spaces are often present in the crystalline material due to varying degrees of disorderness and can be considered as amorphous regions. In the present work, the specific surface area for 10 batches of the same active pharmaceutical ingredient (compound 1) with varying quantity of amorphous content was investigated. Some of these batches showed different flow behavior when processed using roller compaction. The surface area value was found to increase in the presence of low amorphous content, and decrease with high amorphous content as compared to crystalline material. To complement the information obtained from the above study, physical blends of another crystalline active pharmaceutical ingredient (compound 2) and its amorphous form were prepared in known proportions. Similar trend in specific surface area value was found. Tablets prepared from known formulation with varying amorphous content of the active ingredient (compound 3) also exhibited the same trend. A hypothesis to explain the correlation between the amorphous content and specific surface area has been proposed. The results strongly support the use of specific surface area as a measurable tool for investigation of source of batch to batch variation in processability.

Strategy for identification of leachables in packaged pharmaceutical liquid formulations.

Drug stability is one of the key properties to be monitored in pharmaceutical drug development. Drug degradation products, impurities and/or leachables from the drug product and packages may have significant impacts on drug efficacy, safety profile and storage conditions. In the registration stability samples of an ophthalmic pharmaceutical drug product, an unknown compound was found at a level of 0.19% by HPLC analysis. Subsequent liquid chromatography/mass spectrometry (LC/MS) analysis with electrospray ionization (ESI) indicated that the unknown was not related to the drug substance and was most likely a leachable. Identification of this unknown leachable was needed to evaluate the impact on drug safety. Through systematic extraction of various components or component combination of the packaging materials, and subsequently LC/MS analysis, the unknown was found to be a leachable coming from the varnish applied to the label. In general, using LC/MS alone is not sufficient to elucidate the structure of a complete unknown. Gas chromatography/mass spectrometry (GC/MS) was then conducted with a chemical ionization (CI) source to determine the retention time and mass of the compound of interest. Both CI and ESI sources generated the same protonated molecular ion [M+H] and similar fragmentation ions, which provides a good correlation of the unknown eluted in the liquid chromatogram and in the gas chromatogram. GC/MS with electron impact (EI) was then conducted to obtain the EI mass spectrum of this unknown. It was identified as monomethyl derivative of mephenesin through the NIST library search. The identification strategy utilized electrospray LC/MS and GC/MS with chemical and electron ionization sources which provided complimentary information for structure elucidation of this unknown compound. This combination approach in conjunction with systematic extraction was necessary for the determination of the source of this unknown in the pharmaceutical drug stability studies.

The use of LC/MS, GC/MS, and LC/NMR hyphenated techniques to identify a drug degradation product in pharmaceutical development.

Understanding drug degradation in the formulated product is critical in pharmaceutical development as it has significant impacts on drug efficacy, safety profile and storage conditions. As a result, identification of degradation compounds has taken an important role in the drug development process. In this study, various hyphenated analytical techniques, such as liquid chromatography mass spectrometry (LC/MS), gas chromatography mass spectrometry (GC/MS), and liquid chromatography nuclear magnetic resonance with a solid phase extraction interface (LC/SPE/NMR), have been applied to the identification of a drug degradation product which grew over time in the stability study of the drug product. The target unknown is less polar and more unsaturated than the drug substance based upon reverse phase HPLC relative retention time and UV spectra. It is not ionizable by electrospray ionization (ESI) or atmospheric pressure chemical ionization (APCI) in either a positive or a negative mode. The unknown was isolated by an HPLC fraction collector and enriched by solid phase extraction. GC/MS with chemical ionization (CI) was employed to determine the molecular weight of this compound. Its fragmentation pattern was determined by CI-MS/MS using an ion trap mass spectrometer. The isolated material was also analyzed by LC/SPE/NMR, from which the structure of this compound was further characterized. The study utilizes a combination of various hyphenated analytical techniques to obtain complimentary information for structure elucidation of the unknown. The combination approach is critical for unambiguous impurity structure elucidation in drug degradation studies of pharmaceutical drug products.

Liquid chromatography-mass spectrometry studies of St. John's wort methanol extraction: active constituents and their transformation.

The influence of light and solution pH on the stability behavior of phloroglucinols (hyperforin and adhyperforin) and naphthodianthrones (hypericin, pseudohypericin, protohypericin and protopseudohypericin) extracted with methanol from St. John's wort powder (Hypericum perforatum L.) were studied using liquid chromatography-mass spectrometry (LC-MS). When exposed to light, hyperforin and adhyperforin in this extract solution degraded rapidly, particularly at pH 7, where within 12h complete transformation was observed. Contrastingly, when protected from light, the solutions regardless of pH, underwent minimal transformation after 36h. Under light and neutral pH conditions, phloroglucinols and naphthodianthrones had different stability behaviors, which were attributed to the different oxidation mechanisms. Four experiments performed on naphthodianthrones exhibited serious transformation at acidic pHs. One hyperforin transformation product was studied using LC-MS. The molecular structure was proposed on the basis of ion fragmentation patterns obtained from MS/MS studies.